Search  for anything...
XiaoR Geek

Robot Kit 4WD Robot Car Smart Chassis Kit with 4 TT Motor for UNO R3/Mega 2560/Raspberry Pi/Jetson Nano, Smart Robot Car Chassis DIY Learning Kit

    • Based on 65 reviews
Condition: New
Checking for product changes
$25.99 Why this price?

Buy Now, Pay Later

As low as $6 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, May 21
Order within 9 hours and 3 minutes
Available payment plans shown during checkout

Recently Viewed

Features

  • Sturdy Material: The robot car chassis kit is made of sturdy PCB material, which is stronger and more resistant to falling than other acrylic material chassis. Robot wheels are made of high quality rubber and contain sponge inserts. The tread is flat, the contact area with the ground is large and non-slip.
  • Large platform: The size of the robot car chassis is 256*150*2mm, which is larger than the ordinary chassis platform and very easy to expand. Environmentally friendly chassis is stable and flexible in rotation. Maximum load: 500g
  • DIY Education Kit: Smart Robot Car Chassis is a good product for DIY enthusiasts. It is an integrated solution for robotic learning and education. Chassis kits can extend electronic systems like Raspberry Pi or Arduino to achieve functions like tracking, obstacle avoidance, distance measurement and wireless remote control.
  • Build your own robot: The chassis is mechanically simple and consists of a platform with 4 DC geared motors and wheels. You can build your own robot car using Arduino/Raspberry Pi or other controllers and some modules. High degree of freedom, very suitable for DIY themes, popular science education, interest training, educational toys for adults.
  • Support for technical questions: Chassis kits are practical learning packages for beginners, ideal for hobbyists, education, competitions and research projects. You can contact our technical support team to solve technical problems.

Product Dimensions: 10.08 x 6.3 x 2.56 inches


Item Weight: 10.6 ounces


Country of Origin: China


Item model number: XR-003


Manufacturer recommended age: 15 years and up


Is Discontinued By Manufacturer: No


Manufacturer: WiFi Robot


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, May 21

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • strong circuit board material, ill conceived layout
I have mixed feelings about this chassis. On one hand, it's made from thin and strong fiberglass circuit board material, and it's got a lot of pre-drilled slots and holes for mounting controllers and sensors to it. You CAN fit both an Arduino and a full sized Raspberry Pi computer. There are all sorts of screw holes and slots to mount other devices and sensors, but aside from a set of holes for a pan/tilt assembly, and a couple holes for some IR sensors, I can't think of anything else that matches. Except that it has the crossed slots for a photo interrupter module for a slotted wheel tachometer--But no mounting hole(s) drilled for it. Also the crossed slots are completely blocked if you install an Arduino in its position, and crowd the Raspberry Pi mounting area. Again, if you do mount both an Arduino and a Raspberry Pi, you'll have trouble finding a spot for batteries and a motor controller. This board would be better served as part of a kit including a matched deck the bottom deck could have holes for AA, and 18560 battery holders, some of the popular motor drivers, and the motors. The upper deck could be layed out for an Arduino/RasPi, and a few sensors. All of that being said, it's strong and should be easy enough to drill through so I'll be using it in my next project. ... show more
Reviewed in the United States on February 1, 2019 by DancesWithRobots
    • Great Chassis
This is a great chassis but I didn't realize until after I had done some assembling that one of my tires is different from the other 3. This is probably going to affect its ability to drive straight so now I have to buy new tires. Note: My item was shipped in the product box. The delivery guy left it out in the rain and the box was destroyed. Luckily the contents were not wet, but it should have been shipped inside another box so this won't happen. I was unable to keep the product box, which would have been nice for storing the chassis and parts until I was ready to use them. ... show more
Reviewed in the United States on January 10, 2021 by Aunrea
    • Sent with too-short bolt length
The 7 of the 8 bolts for connecting the motors to the chassis were the correct size. However, one was a 1/4 inch shorter than the other 7 and was too short to go through the motor. So I couldn’t attach one of my motors without going out and buying some more bolts that are long enough. I reached out to customer service and they were very accommodating. They sent me a link for the correct replacement screws and provided a partial refund that would cover the cost of the additional screws. Aside from the headache of dealing with this and the delay that came with needing to place a second order, in the end I was able to get what I needed. ... show more
Reviewed in the United States on May 27, 2020 by Grace Brueggman
    • Nice kit for a school project
Review Image by Melsa Melsa
Review Image by Melsa Melsa
This shipped quickly which was great because my son needed a chassis kit for an upcoming school project in a pinch. Was very easy to use and he was able to hook up his electronics to make his project come to life!
Reviewed in the United States on October 4, 2022 by Melsa Melsa
    • Works but not super strong.
Lightweight chassis. Wheels come off and the motors are held on by tabs instead of screwed directly to the board. One motor was broken on receipt and they shipped a new one, no hassle.
Reviewed in the United States on October 12, 2018 by Mark
    • Nice DIY projects!
Review Image by RB RB
Review Image by RB RB
What you see is what you get, the PCB is sturdy enough to mount your Ardiuno or Raspberry on to build your own robot. It's a easy to assemble and a good starter kit.
Reviewed in the United States on October 11, 2022 by RB RB
    • Incomplete kit
While the parts received (4 motors, 4 wheels and 8 screws with nuts) are correct, the plastic chassis as shown on Amazon and in the description was not included in the kit. I don't know why it's missing. Fortunately, I can make my own. Unfortunately, other customers may not be able to.
Reviewed in the United States on June 23, 2020 by KP_Sr
    • Great little platform for robotics play
I mean, it's 20 bucks so you can't expect too much, but what you get is a really impressive platform for playing around with robotic possibilities using your Ardiuno or Raspberry. The kit is light on instructions so you'll spend a little time figuring it out and getting it right but I got it done in a couple of hours, including wiring. The wire they send for the motors is thin and stranded, and would have been hard to attach to the terminators at both ends, so I used solid core instead. I used some of the bag of extra nuts and bolts they included to attach my Pi. Nice touch. ... show more
Reviewed in the United States on January 20, 2019 by RobR

Can't find a product?

Find it on Amazon first, then paste the link below.