Search  for anything...
Mount-It!

Mount-It! Triple Monitor Stand | 3 Monitor Stand Fits 19 20 21 22 23 24 Inch Computer Screens | Free Standing Base | Three Heavy Duty Full Motion Adjustable Arms | VESA Compatible

    • Based on 1,417 reviews
Condition: New
Checking for product changes
$64.99 Why this price?

Buy Now, Pay Later

As low as $10.83 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Value Max
Arrives May 19 – May 21
Order within 23 hours and 17 minutes
Available payment plans shown during checkout

Features

  • TRIPLE MONITOR STAND: Fits 3 monitors 19 20 21 21.5 22 23 24 inches, with a maximum support weight of 15.4 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Measure, in millimeters, the distance between the bolt holes in the pattern on the back of your monitor if unsure of size.
  • FEATURES: Free standing monitor desk stand has full motion, height adjustable arms and is made of heavy duty steel and have integrated cable management on each to keep your cables out of sight. VESA plates are removable, which makes for easier mounting. Comes with stable free standing base for desktops.
  • FULLY ADJUSTABLE: 2 of 3 monitor stand outer arms can tilt 45 degrees up and down from center, swivel 360 degrees, and raise and lower on the middle pole. Middle screen can be height adjusted, tiled, and swiveled as well. All 3 screens can be placed and held in portrait or landscape orientation independent of one another. TO ALIGN THE HEIGHT OF THE MONITORS, ROTATE THE HEIGHT ADJUSTMENT SCREW BEHIND EACH MONITOR VESA HEAD TO RAISE AND LOWER EACH MONITOR UP TO 1 INCH.
  • EASY INSTALLATION: Triple monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Detachable VESA plates are mounted to the back of the monitors, and re-attached with a single bolt. Non-skid free stand sits atop any desktop. See instructional video for additional tips on functionality and assembly. TO AVOID TIPPING THE STAND AND MONITORS NEED TO BE BALANCED.
  • 5-YEAR WARRANTY: 3 monitor mount comes with a 5-year warranty and our friendly and responsive US-based customer support team is available to answer any questions you may have during normal business hours.

Description

Mount-It! Triple Monitor Stand MI-2789 Our triple arm monitor mount and stand allows you to clear out your desk space while providing ergonomic monitor installation height. Individual height adjustments for each arm perfectly align the position of your monitors. The heavy duty stand and pole design makes this three monitor mount extremely stable. The double link swing outer arms that support the monitors can be adjusted on the vertical tube for ideal height. Features Fits screen sizes: 19" to 27" Screen Rotation: 360° Tilt: +45°, -80° Weight Capacity: 15.4 lb (per monitor) VESA: 75x75 mm, 100x100mm Arm width: 58.5" Read more Mount-It! Triple Monitor Stand Mount-It! Dual Monitor Stand Mount-It! Full Motion Triple Monitor Desk Stand Mount-It! Quad Monitor Stand Monitors 3 2 3 4 Screen Sizes: 19" - 27" 13" - 32" 13" - 24" 13" - 32" VESA Compatible: 75x75, 100x100 75x75, 100x100 75x75, 100x100 75x75,100x100 Monitor Weight Capacity Per Screen: 15.4 lbs 17.6 lbs 22 lbs 17.6 lbs


Brand: ‎Mount-It!


Item model number: ‎MI-2789


Item Weight: ‎14.72 pounds


Product Dimensions: ‎27.95 x 10.63 x 4.33 inches


Item Dimensions LxWxH: ‎27.95 x 10.63 x 4.33 inches


Manufacturer: ‎Mount-It!


Is Discontinued By Manufacturer: ‎No


Date First Available: ‎June 30, 2016


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: May 19 – May 21

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Good for the price but here are some considerations
I am really satisfied with this product and would recommend it with the understanding that it is a lower priced unit and trying to get the most bang for the buck. I have 3 x 24" Sceptre curved monitors which are light. The stand/mount is sturdy enough for my setup which is a Veridesk ProPlus 48 on top of my desk. Mounting / Stand: The reason why I went with this unit over others was in the video, it showed a bolt mounting through the desk into the center pipe. However, when the unit came, I found that it did not come with the bolt to bolt the stand to the desk. The bottom plate was steel, has some weight to it, and solid. There are 3 smaller bolts that are used to hold the main pipe to the bottom plate. However, there was no big hole in the bottom stand plate to be able to bolt the main pipe to the desk. The main pipe did have the threaded mount welded inside for the big bolt so you could mount this stand directly to the desk. I found that there was enough room between the 3 smaller bolt holes that I was able to drill a big hole through the steel plate and use the 3 smaller bolts to bolt the main pipe to the bottom plate. I then drilled a hole through the particle board on the Veridesk stand. I also added to the bottom side of the Veridesk stand, a 6" x 8" x 3/4" plywood, drilling a hole through its center, so it could add support. See attached picture. I added the plywood because I saw in reviews of another stand where the desk's particle board gave way. I had to use my own big bolt. For tightening, with the way the bottom stand is molded, it would be easy to over tighten. I snugged this up but was careful not to over tighten. Monitor Setup and Adjustments: I like the clips for cable management. In adjusting the arms, I found that I am unable to get the 3 monitors aligned exactly side by side. The center monitor is about 3/4" higher then the left and right monitor. The mounts for the left and right monitor have a little bit of play in them. There may be an adjustment I am missing, but not enough I am too concerned with. I was able to adjust to where I want them to be. Looking at the monitors, the farthest right monitor mount is over a 1/4" lower then the others. So I used a longer mounting bolt and put in several washers and a nut to create a spacer to make up for the gap. See attached picture. Ok... with having to drill holes, use my own big bolt and smaller hardware for the monitor mounting I understand some folks may have given a much lower rating. My perspective is that yes I was a not happy at first, but when I found that the pipe did have the nut welded inside so the stand could be mounted to the desk, I could make this work. Going back to getting the most bang for the buck, compared to other mounts which are 2-3 times higher in price, a little bit of extra effort on my part with some parts I had on had, not that big of a deal. Just wanted to give a heads up to those who may not have the tools or parts on hand. In the end, the stand/mount is sturdy and working like a champ for the light weight monitors. A very clean and processional look for a triple display. ... show more
Reviewed in the United States on April 19, 2020 by Lisa R
    • Sturdy 3 monitor stand
Review Image by J9
Review Image by J9
I was looking for a stand that was sturdy with multiple adjustment options (I am super OCD about things being lined up). This stand met both of my criteria's. It did take me a while to set up (approx. 1hr and 45min), but that is because I am a direction reader. The stand is made of heavy metal. The arms are stable and do not seem to sag with all 3 of my 19" monitors attached. The movement of them is a little tight which I like so they do not easily move out of place. I have Lenovo Monitors and the Versa mounts fit perfect. I like the cord attachments on the arms. This helps a lot with keeping things neat and tidy. There were two things so far that I do not like. 1.) The side monitors are held on with a nut that screws onto the top of the adjustment screw. The tools that were included with the stand does not come with a wrench that fits this nut to attach it tighter so you can only tighten it as tight as your fingers will allow. Due to this the monitor can giggle left to right just a little, which for someone as OCD as I am can be annoying as I have to move the monitor back to its place if I accidentally hit it. 2.) The overall height adjustment up and down the center rod has proven to be the hardest part if all 3 monitors are already attached. There is one bolt that secures the entire arm to this rod which is loosened with an allen wrench. If you are not supporting the bottom of the entire arm at the rod and you loosen the bolt too much your monitors will drop to the table pretty quickly. My suggestion for someone setting this up from the beginning is attach the arm to the rod where you think you may want it and secure the arm and then hang the middle monitor only to see if you have it at a height you like and make adjustments this way before adding the weight of the side monitors. You can still adjust the middle monitor up and down a little once the arm is attached so you have some play room there too. Tips when putting it together: 1.) Do not attach one monitor on the side without putting pressure onto the other arm otherwise the stand will fall over with this weight of only one monitor hanging on the side, like a seesaw. I attached one monitor on the side and pushed down on the arm of the other side while attaching it so it didn't tip over and then just continued to hold it until I attached the other monitor on the side. You could try hanging the middle monitor and then one on the side and see if the extra weight makes a difference. I did not try that method though. 2.) Before you attach the middle monitor move the height adjustment screw all the way to the top so that you can still use the allen wrench on the nut that tightens the tilt for the center monitor. Otherwise the allen wrench will not have the space it needs to tighten the nut. Once you tighten this some you can lower the monitor height as needed and still adjust the tilt as long as you don't over tighten the nut. Overall for the money I paid this is a great stand. I needed it to go on my Ergotron standing desk as they do not make them wide enough to support 3 monitor stands separately. It is made entirely of metal and feel well made to me. I would definitely recommend this to someone. Since having it I have noticed my stand up desk is a little harder to lift as the extra weight of the monitor and the stand is more than I had before but it is not too bad of a difference. ... show more
Reviewed in the United States on August 28, 2018 by J9

Can't find a product?

Find it on Amazon first, then paste the link below.