Search  for anything...

MotorGuide MGA015PB6 Mounting Isolator Kit — Absorb Shocks, Protect Electronics — Includes Corrosion-Resistant Bolts — Set of 4

  • Based on 878 reviews
Condition: New
Checking for product changes

Buy Now, Pay Later


As low as $3 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.


Availability: In Stock.
Fulfilled by Amazon

Arrives Wednesday, Jun 5
Order within 6 hours and 3 minutes
Available payment plans shown during checkout

Features

  • Absorb shocks to help protect electronics
  • Ensure that electronics are not subjected to potentially damaging energy
  • Durable construction
  • Includes long, corrosion-resistant bolts
  • Set of four

Description

These MotorGuide Mounting Isolators absorb shocks to help protect electronics and ensure the most reliable performance. These Mounting Isolators provide an effective cushion and absorb vibration and shocks so the electronics are not subjected to that potentially damaging energy. These durable Mounting Isolators include long, corrosion-resistant bolts. This is a set of four Mounting Isolators. MotorGuide has been dedicated to engineering and manufacturing innovative trolling motors and accessories for over 50 years. Proudly setting the standard for the most accurate PinPoint® GPS system and quietest motors, MotorGuide provides anglers with precise propulsion for superior boat control. MotorGuide factory isolators offer a quick and simple way to mount a trolling motor or other marine electronics when you have limited access. Each rubber isolator has a molded-in nut inside the small end, that when tightened up against the underside of the deck by the stainless steel bolt forms a rubber mushroom shape that hold the mount in place. The rubber absorbs shock and limits vibration, providing a solid installation-- without having to get under the deck or behind the console. Each kit comes with four stainless steel bolts and four rubber isolators, along with mounting instructions for easy installation.

Brand: MotorGuide


Item Weight: 0.3 Pounds


Color: Black


Recommended Uses For Product: For Salt Water


Mounting Type: Bow


Item Package Dimensions L x W x H: ‎8.23 x 2.8 x 1.73 inches


Package Weight: ‎0.14 Kilograms


Item Dimensions LxWxH: ‎7 x 7 x 2 inches


Item Weight: ‎0.3 Pounds


Brand Name: ‎MotorGuide


Model Name: ‎Motorguide Boat Motors


Color: ‎Black


Suggested Users: ‎unisex-adult


Number of Items: ‎1


Manufacturer: ‎MotorGuide


Part Number: ‎MGA015PB6


Included Components: ‎End Product and Infromation


Size: ‎One Size


Date First Available: October 1, 2001


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Wednesday, Jun 5

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Top Amazon Reviews


  • Awesome product
Not able to get underneath for nuts and washers..these are the answer..great price and hold my trolling motor very secure..highly recommended..
Reviewed in the United States on October 7, 2023 by Erby Williams Jr.

  • Very good fast mounts, just be aware of limited life...order a second set for spare.
These are actually very nice mounts and easy to use. I highly recommend, however anyone ordering should order a second set as a spare. The very design of these will not last forever. In fact, my first set of these just failed on the water. Glad I had a second set onhand on the boat and a phillips screwdriver in the boat toolbox. Took 15 minutes to replace with a new set on the water. Now for the problem...the design of the mounts are to isolate shock and torque from the mount holes through the fiberglass boat deck. They truly do the job for this....no deck cracking what so ever after three full years of fairly hard use. However, this advantage comes at a price. The mounts are rubber and will eventually tear through/separate from the brass threaded tightening sleeve. When this happens, the mounts will have no grip and pull straight out. Fortunately, my MG gator mount has four of these, and motor torque only tore thru the 2 isolators on one side of the mount. When I replaced, I did all four of the isolators....glad I did, as the other two were about to fail as well. When the two did let loose, the mount looked as if it was going to fly off the boat, but the other two held. Lesson learned....although you're not supposed to have to get access below the deck to use these mounts, I WILL be adding a washer and nylon lock nuts to make sure the next time they fail, the mount doesn't try to jump off the deck:) My heart can't take that anymore! Excellent mounts though, I'm back here to order two more sets for spares! ... show more
Reviewed in the United States on June 5, 2010 by Chuck Loeffler

  • So far so good. Was a little skeptical at first after reading ...
So far so good. Was a little skeptical at first after reading a review of them ripping out due to not having enough fiberglass to grip. Once i drilled into my hull, i only had a depth of maybe a 1/4 to 1/2 an inch of fiberglass for these to grip on to, so without any other options, I proceeded with insallation. Insallation was super easy, and just so you know, you have to screw down on these a lot..... a lot. I seriously thought the screw was stripped, so backed it out and the screwed it in while holding it. Nope, just takes a lot of turns of the Ole screw driver if there isn't much to grip. It will tighten to where you cant turn anymore, just keep going till you get there. The motor held fine during trasport. I then moved boat to 5mph with gas motor and my wireless bow mount as a rudder just to see the torque. It worked great. I ordered another set to keep on boat just in case one does pop out. Been out so far 6 times and still holding strong. In the instructions it informs you to tighten after your first trip. I just tighten after or before every trip just incase. And if I have room, I just transport bow mount motor in truck or boat just to keep pressure off of mounts. defiantly worth the money and a great option if you have no water to get under bow. ... show more
Reviewed in the United States on May 20, 2015 by J. Buckman

  • Good I think?
Not sure if I installed these right, there’s no instructions. Had to YouTube it but I think they’re working. They just help mount the trolling motor. Decent quality
Reviewed in the United States on July 21, 2021 by Allan H.

  • Nothing better than factory parts at a good price!
After 12 years my motorguide started to move and jumped when I changed to a higher velocity so I knew it was time to change the mounts and nothing better than the original brand, my trolling motor is back just like it was new again. Don't settle for initiations just to save maybe two or three dollars get the original brand will save you on the long run and good peace of mind. ... show more
Reviewed in the United States on December 10, 2023 by Myrna Gonzalez

  • Motorguide Trolling Motor Mounts
I had never mounted a trolling motor myself on my boat, it came with one, and I was about to replace the whole thing (mount included) so I removed the old one...long story short, I ended up putting it back on and needed new mounts. I would have needed them either way... Removing the old mounts actually proved to be harder than putting in the new ones! I followed the simple directions (paraphrased here): Put the rubber mounts in pre-drilled holes of (X size). Set your motor mount on the rubber isolator tops, align holes. Firmly press down on the motor mounting system to be flush with the rubber mounts, and make sure the rubber mount is flush with the fiberglass on your boat. Drive the screws in to pull the rubber up and hold your motor mount in place. (pro tip - USE AN ELECTRIC DRILL / SCREW DRIVER for this) The steps are really that easy. And it works great. Not that there was any surprise, it's a simple concept, and a simple implementation. One thing you SHOULD be aware of though-- if you set your front holes (or if they were previously set) too far forward, you need to be careful the front bolts are NOT TOO LONG. If so, you will punch right through the bottom fiberglass...mine was that way and instead of remounting slightly further back, I just used the shorter bolts in front. No biggie. All in all, a great product that works fantastically. Easy to install and will last for years. 5 of 5 for me! ... show more
Reviewed in the United States on August 7, 2011 by David L.

  • Exactly what I needed
Unable to access the underside so these were perfect for my MG trolling motor. They keep it secure but will rip up if you hit a rock or something. Oh well, just buy another set and reinstall
Reviewed in the United States on June 27, 2023 by SlyGuy

  • Perfect fit!
The are a perfect factory replacement and works perfect. I use a little antisez on the end of bolt. The old one were seazed up and had to be cut off .
Reviewed in the United States on August 9, 2023 by Brandy Koch

Can't find a product?

Find it on Amazon first, then paste the link below.