Mitutoyo 530-104, Vernier Calipers, Stainless Steel, for Inside, Outside, Depth and Step Measurements, Metric, 0"/0mm-150mm Range, +/-0.05mm Accuracy, 0.05mm Resolution, 40mm Jaw Depth | Stainless Steel

Features

• IMPERIAL PRECISION CALIPER PERFORMANCE: Built for accurate multi-mode measurement, this stainless steel vernier caliper in metric units - enabling stable, repeatable OD, ID, depth and step checks on the shop floor.
• INCREASES EDGE-TO-POINT CONTACT FEEL: Verify OD/ID, depth, and step dimensions with confidence - hardened stainless construction and a smooth slider provide stable feel and consistent readings, while the fine vernier/dial scale reduces parallax for quick, accurate checks.
• UPGRADES PART-TO-PROBE SIGHTLINES: Raised sliding surfaces protect graduations, and options like long jaws, round measuring faces, or fine-adjust carriages extend reach and control for hard-to-access features on the line.
• STABILIZES INDICATOR SWEEP MOVEMENT: Read dimensions quickly with clean, low-glare scales in tough lighting. heat-treated stainless construction and clear scales support repeatable OD/ID/depth/step checks.
• A LEGACY OF QUALITY: Our ultra-precise measurement solutions bring improved performance to countless industries, including aerospace, medical, automotive and energy. With more than 5,500 products the largest product portfolio of any commercial metrology provider we have the solutions you need to meet today's metrological challenges and customer expectations.
• Features upper locking screw

Description

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B.Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Brand: Mitutoyo

Material: Stainless Steel

Product Dimensions: 9.69"L x 3.86"W

Range: 150mm

Measurement Accuracy: +/-0.05mm

Brand Name: Mitutoyo

Unit Count: 1 Count

UPC: 603908141358

Manufacturer: Mitutoyo

Global Trade Identification Number: 58, 65

Item Weight: 143 g

Model: 530-104

Part Number: 530-104

Range: 150mm

Measurement Accuracy: +/-0.05mm

Number of Batteries: 1 Lithium Ion batteries required.

Material Type: Stainless Steel

Item Dimensions L x W: 9.69"L x 3.86"W