Search  for anything...

KICKER for Dodge Ram Crew Cab 2012 & up Speaker Bundle- 2-Pairs of CS 6x9 Speakers, & a Pair of CS 3.5" Speakers

  • Based on 210 reviews
Condition: New
Checking for the best price...
$344.97 Why this price?

Buy Now, Pay Later


As low as / mo
  • – Up to 36-month term if approved
  • – No impact on credit to apply
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

FREE 30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.


Availability: 20 left in stock
Fulfilled by Creative Audio

Arrives Wednesday, Apr 29
Order within 4 hours and 17 minutes
Available payment plans shown during checkout

Protection Plan Protect Your Purchase
Checking for protection plans...

Features

  • Upgrade all of your Dodge's speakers!
  • Trusted Kicker Quality.
  • EVC (Extended Voice Coil) technology for high thermal handling
  • Durable, Ribbed UV-Treated Polyester Foam speaker surround for precise linear excursion

Description

Kicker for Dodge Ram Crew Cab 2012 & up speaker bundle- 2 pairs of CS 6x9" speakers, & a pair of CS 3.5" speakersThis bundle includes two pairs of Kicker CS 6x9" coaxial speakers, and a pair of Kicker CS 3.5" Coaxial speakers. Kicker CS Series 6x9 Coaxial 46CSC6934 Speaker Design - 3 - way Woofer Size | in [mm] - 6x9 [160x230] Mid Size | in [mm] - 2 [50] Tweeter Size | in [mm] - 1/2 [13] DC Resistance | ohm - 3.5 Peak Power | Watts - 450 Continuous Power | Watts, RMS - 150 Sensitivity [SPLo] | dB @ 1W, 1m - 92 Effective Frequency Range | Hz - 30-20k Mounting Hole Diameter | in [mm] - 5 5/8 x 8 7/16 [143x215] Top Mount Depth | in [mm] - 7/16 [12] Bottom Mount Depth | in [mm] - 3 3/16 [81] Tweeter Protrusion | in [mm] - 1/16 [1] Grilles - Yes Tweeter Magnet Material - Electric Crystal Motor Tweeter Dome Material - PEI [polyether imide Tweeter Design - Balanced dome Woofer Cone Material - Polypropylene Woofer Surround Material - Polyester foam Kicker CS Series 3.5 Coaxial 46CSC354 Speaker Design 2 - way Woofer Size | in [mm] 3 1/2 [89] Tweeter Size | in [mm] - 1/2 [13] DC Resistance | ohm - 3.2 Peak Power | Watts - 90 Continuous Power | Watts, RMS - 30 Sensitivity [SPLo] | dB @ 1W, 1m - 88 Effective Frequency Range | Hz - 80-20k Mounting Hole Diameter | in [mm] - 3 [78] Top Mount Depth | in [mm] - 1/4 [6] Bottom Mount Depth | in [mm] - 1 11/16 [42] Tweeter Protrusion | in [mm] - 1/8 [3] Grilles - No Tweeter Magnet Material - Neodymium Tweeter Dome Material - PEI [polyether imide] Tweeter Design - Balanced dome Woofer Cone Material - Polypropylene Woofer Surround Material - Polyester foam

Brand: KICKER


Speaker Maximum Output Power: 450 Watts


Frequency Response: 20 KHz


Connectivity Technology: Coaxial


Audio Output Mode: Surround


Audio Output Mode: Surround


Mounting Type: Coaxial


Enclosure Material: Poly-foam, Steel


Speaker Type: Coaxial


Additional Features: Radio


Antenna Location: For Car Audio


Controller Type: Corded Electric


Color: Black


Is Waterproof: FALSE


Warranty Type: Limited


Control Method: Voice


Speaker Size: 3.5 Inches


Woofer Diameter: 6 Inches


Tweeter Diameter: 0.5 Inches


MP3 player: No


Processor Count: 1


Specific Uses For Product: for car audio


Unit Count: 1.0 Count


Item Dimensions D x W x H: 14.5"D x 17"W x 13.38"H


Item Weight: 18 Pounds


Compatible Devices: Desktop, Laptop, MP3 Player, Projector, Smartphone, Tablet, Television


Compatible with Vehicle Type: & SUVs, Select Cars, Truck


Power Source: Corded Electric


Brand: KICKER


Model Number: 40CS693440CS693440CS354


Model Name: 40CS693440CS693440CS354


Built-In Media: 40CS693440CS693440CS354


Number of Items: 1


Customer Package Type: FFP


Series Number: 46


UPC: 600316803199


Manufacturer: Kicker


Warranty Description: 1-Year Manufacturer Warranty


Speaker Maximum Output Power: 450 Watts


Frequency Response: 20 KHz


Number of Audio Channels: 2.0


Impedance: 4 Ohms


Connectivity Technology: Coaxial


Wireless Technology: Coaxial


Subwoofer Connectivity Technology: Wired


Connectivity Protocol: Coaxial


Audio Driver Type: Dynamic Driver


Audio Driver Size: 6 Inches


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Wednesday, Apr 29

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Top Amazon Reviews


  • Sounds
Easy installation, good quality sound!
Reviewed in the United States on February 24, 2026 by Malia

  • Amazing Upgrade...READ MY INSTALL NOTES or you will be sorry
Absolutely transforms your audio! 2017 Ram1500 CrewCab. Uconnect 5.0, RA-2 head unit. Amazing difference in sound and it will make the OEM speakers sound like trash. Great value for the money. Be advised that this KIT is not just swap em out and done. Read below or you will be very disappointed. Install Must Haves: 1. Buy Metra speaker harnesses. You will need 2 Metra 72-7902 (3.5” Dash) and 4 Metra 72-6514 (6x9’s). These connect the speaker to your factory connectors. Clean install, no splicing. Clips in like stock. 2. You WILL absolutely need 6x9 spacers for the front doors. No question about it. Kickers magnet hits the window regulator arm. I used a 1/4” spacer then used plastic to make mine about 3/8”. 1/2” is too big, makes it really difficult to get the door panel back on flush. Requires a little backyard ingenuity or if you are fortunate enough to have access to a 3D printer. Use silicone/RTV to seal the spacer against the door. No clearance issues on rear doors, plenty of room. 3. Pay attention to this, most importantly!!!. The OEM 3.5” dash speakers are 8ohm speakers. The Kicker 3.5” are 4ohm. You need to add a resistor. If you do not, your dash speakers will overpower everything with highs and make your ears bleed making you realize your audio system is worse than stock. Here is how to fix it: Purchase 10watt 4ohm resistors. Little white ceramic “brick” with a lead on each end. Splice/solder/heatshrink this into the Positive wire on both of the Metra 72-7902 harnesses. The positive lead has the wider speaker blade connector. Just cut a section out of the wire and install this in the gap of both harnesses. Now you have an 8ohm speaker again as designed. Crank it up and ENJOY!!! Until you realize a powered hideaway subwoofer behind the rear seat would complete the audio! Haha, happened to me! Sounds amazing though! Better than stock Alpine. ... show more
Reviewed in the United States on May 3, 2019 by Thundermug

  • Screws are cheap and strip but speakers seem good.
So far I like them. They are still new and I'm currently running the factory radio off them. Soon I will be running an amp, so we'll see how they handle it. You WILL need ⅜" spacers for the front speakers. I found 3D printed ones on Amazon for cheap and they worked great. Also, like everyone else commented on their reviews, get the proper plugs..it makes install a breeze. My biggest gripe is the screws. They are very cheap and strip easily. Reason for 4 stars instead of 5.. Right now I'm only running probably 15-20 watts RMS from factory radio (non-alpine). I have an amp that will push 100 watts RMS for each speaker (except the tweeters). I'll update after I get the amp installed. Also, note these are 4ohm speakers and the factory I believe are 8ohm. The front tweeter on non alpine system is tied into the front 6x9s from everything I read. Since I'm using an amp I'm running all my wires separately. ... show more
Reviewed in the United States on December 29, 2025 by SB

  • Just do it!
Installed these in a 2019 Ram and Whoa! What an improvement over the stock speakers. Easy to install all 6 speakers and they all fit with no need for any spacers. I recommend getting the quickly connect adapter so you install is literally plug and play! Great YouTube videos on how to install in 2019 Ram. I’m fairly certain the install is similar for multiple years of Ram trucks. ... show more
Reviewed in the United States on June 22, 2025 by Alphonse G. Basil Jr

  • Follow user recommendations for spacers and tweeter resistors.
These speakers Rock! Plenty of bass. I followed the advice of one of the users adding a resister to the dash tweets and 1/4 inch spacers for the front to clear the window mechanisms. Using the stock head. These were a significant improvement over stock.
Reviewed in the United States on April 5, 2026 by Ray P. Lucero

  • Way better than factory...The picture in the listing is not what you're getting
This review is for installing the speakers in a 2014 Ram Express. Picture in the listing is for the Kicker D series line of speakers. You're gonna get the C series if you buy from this listing. They're still great speakers and easier to install if you buy the wiring harnesses. For the door speakers you will need: Metra 72-6514. The dashboard speakers will need: Metra 72-7902. Amazon doesn't sell the 7902. You can purchase from Best Buy or Crutchfield. You can just splice them if you want but getting the harnesses is for real pressing the easy button. They are a like for like replacement for factory speakers in my truck. Time consuming part is removing the door panels to get to the speakers. They sound great. Edit 5/26/2022 I had to come back and say this: if you just dropped these in without sound deadeninig and fast rings you're really missing out. i put the kilmat brand sound deadening on the door right behind the speaker and around the the outside of the speaker mount. i also added gasket tape to the back of the speaker and fast rings. HUGE difference. almost don't need subwoofers. ... show more
Reviewed in the United States on January 24, 2021 by theprimedirective

  • Great aftermarket sound
Great product, clean sound for normal use. Installed in my ram 1500. I did use spacers for the front doors to avoid the window rail. I also recommend using the wiring harness to make factory connection easier. No splicing needed when you use Nulth 72-6514 and Red Wolf front dash tweeter aftermarket to factory harness connectors. ... show more
Reviewed in the United States on March 10, 2025 by Steven Ramirez

  • Worth every penny!
These are worth every penny! I had the stock basic speakers in my 2014 RAM 1500 Express. I never really cared for the sound that much but I got the truck because I wanted a truck with lots of room and wasn’t really worried about the stereo system. I finally decided I needed to do something about the just ok sound of the stereo. I saw a few reviews and install videos on this set and the price was great so I said what the hell and got them. Man what a difference! Higher highs and deeper lows. They sound soo much better and can handle the stock headunit with no problem. Wish I had got them sooner. You will need a spacer for the front door 6X9s. I used a 1/2 inch, I’d say use the 1/4. The 1/2 fit but we’re tight and took some adjusting. The spacer is to get the speaker magnet off the window support. I would recommend these to anyone looking for a great upgrade without breaking the bank. ... show more
Reviewed in the United States on October 5, 2018 by EricnNC

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...