Search  for anything...
JENENSERIES

Solar submersible Pump 4 inch 1100W 220VAC and 300VDC, Stainless deep well impeller pumps with max head 33m, 18m³/h Flow with MPPT AC/DC controller float switch kits for farm pumping

  • Based on 2 reviews
Condition: New
Checking for product changes
$1,150.00 Why this price?

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term if approved
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 5 left in stock, order soon!
Fulfilled by Amazon
Arrives Tuesday, Jun 10
Order within 23 hours and 50 minutes
Available payment plans shown during checkout

Recently Viewed

Size: 1100W+AC&DC controller


Features

  • [Specification]: JENENSERIES Solar AC&DC submersible Pump , AC220V, DC300V ,4 Inch pump Dia,9.8ft extension cable, Max head 33m(108ft),18m3/h Flow, PV open circuit voltage 210-450V with AC&DC MPPT controller for farm, Garden, home, pool, Industrial.
  • [High-quality controller]: The solar water pump controller utilizing MPPT technology to ensure maximum flow is delivered under all light conditions. At the same time, it can also use alternating current, and when there is no sun, it can switch to use alternating current working mode. It comes with display so you can check the working status of the pump.
  • [Intelligent Water Shortage Sensers]: This solar water pump has an intelligent water shortage sensor, so it has an intelligent water shortage protection function. When there is no water in the well, the pump will automatically stop working.
  • [Pump Motor]:The solar pump use NSK bearing with permanent magnet brushless synchronous motor. So the pump has sufficient power and high efficiency. It is also driven with double impellers to meet the needs of large flow.
  • [Check Valve]: It is with a check valve. The check valve is used to prevent the water from flowing back into the pump and causing the impeller to reverse. The check valve can be removed if it is not needed. NOTE:If you have any questions after receiving the pump or you need a pump with other parameters, please contact the seller in time, we will be responsible for our products.

Description

1.Specifications:DC Voltage: 300VAC Voltage: 220VSolar panel voltage range: 210-450VDCRated power: 1100W Max.input solar power :1800WPump speed range: 1000-4000RPM Max. Head: 33m(108ft)Working Temperature : -15-60℃Outlet diameter: 2 inch Pump diameter: 4 inch Length of cable: 9.8ftSolar panels：9 pcs of 200w voc44V in series（not included） 2.Features: Solar water pump：304 stainless steel deep well submersible pump, durable for home and industrial use.MPPT controller: The solar water pump controller drives the high efficient brush-less DC pump motor, utilizing the latest MPPT technology to ensure maximum flow is delivered under all light conditions. It also protects the submersible pump from frequent start up in low light conditions, overheating & running dry.Alloy mechanical seal:Longer working life and high reliability.Intelligent water shortage protection: The pump stops working automatically when there is no water in the well, and automatically start working 15-30 minutes later. 3.Package：1Solar pump1AC&DC controller1 Accessories1 User's manual

Brand: JENENSERIES


Material: Stainless Steel


Style: Submersible


Product Dimensions: 3.7"L x 3.7"W x 20.7"H


Power Source: Solar Powered/AC


Item Weight: 11.5 Kilograms


Maximum Flow Rate: 18 Cubic Meters Per Hour


Maximum Lifting Height: 33 Meters


Voltage: 450 Volts


Manufacturer: JENENSERIES


Brand: ‎JENENSERIES


Material: ‎Stainless Steel


Style: ‎Submersible


Product Dimensions: ‎3.7"L x 3.7"W x 20.7"H


Power Source: ‎Solar Powered/AC


Item Weight: ‎11.5 Kilograms


Maximum Flow Rate: ‎18 Cubic Meters Per Hour


Maximum Lifting Height: ‎33 Meters


Voltage: ‎450 Volts


Manufacturer: ‎JENENSERIES


Item Weight: ‎25.3 pounds


Country of Origin: ‎China


Item model number: ‎JENEN4FLA10-20-1.1


Size: ‎1100W+AC&DC controller


Cutting Diameter: ‎3.7 Inches


Usage: ‎pumping


Included Components: ‎pump controller, water pump


Batteries Included?: ‎No


Batteries Required?: ‎No


Warranty Description: ‎1 year warranty


Assembled Diameter: ‎3.7 Inches


Date First Available: September 4, 2022


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Jun 10

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Good Overall Performance
Size: 500W-393ft
Review Image by Megan Megan
Review Image by Megan Megan
I'm pretty impressed with this pump so far. I have it hung at 135ft. in our 4" well casing. The static water level is 85 feet. I did install the low water level sensor about 5 ft. above the pump down inside the well. The float is protected inside some 1" sch 20 PVC pipe with caps on both ends. Drilled some holes in the caps so the float can operate with the water level in case it pumps down. Initially I powered the controller with our 48V golf cart. It would produce a solid 5 gpm at 3100 rpm with 48v. After my solar panel installation was completed (4) panels each rated at 395 watts and 49.5 VOC. They are wired 2S2P. This works out to be about 98 volts in series then when paralleled with the other two series panels about 790 watts of total power. My solar array is 250 ft. away from the well due to shade. The pump is now producing about 8-9 gpm through a 5/8" garden hose. I have attached up 150ft. of water hose at the top of the well to simulate extra head and it still produces 6-7 gpm. I will later be doing some irrigation and pond filling so only time will tell but so far its a great value and seems to be decent quality. Read the manual to understand how the sensors work. ... show more
Reviewed in the United States on August 3, 2022 by Megan Megan
    • Less Than Helpful Instructions
Size: 270W-272ft
In several places the description of the pump states its output size is .75" (3/4"). While it's true that the actual pipe thread inside the output end of the pump is 3/4" female pipe thread, the adapter included with the pump to screw into that opening is a 1" hose barb fitting. Thus you need 1" poly pipe to fit over that 1" hose barb, and 1" check valve if you're using a pressure tank. I also found no instructions on how to wire a pressure switch into the controller when using a pressure tank. From reading websites for other brands of pumps, I found that they require a "reverse acting" pressure switch. I'm assuming the same applies to this pump, but it would be helpful to have that information in the instruction booklet. Edited to add: The seller is very helpful, prompt and courteous. When the well switch failed, I contacted the seller via email and received a replacement switch nine days later. ... show more
Reviewed in the United States on October 5, 2022 by JR
    • Easy to setup and better than expected performance
Size: 500W-393ft
Review Image by LunaDawn LunaDawn
Review Image by LunaDawn LunaDawn
Review Image by LunaDawn LunaDawn
Review Image by LunaDawn LunaDawn
Review Image by LunaDawn LunaDawn
Review Image by LunaDawn LunaDawn
The media could not be loaded. I have to say I was skeptical at first of buying this and even more skeptical when I received it because of how small and lightweight the pump was. I figured there was no way this little pump is gonna produce any legitimate amount of water out of a 130ft well. I was wrong but more on that later. Setup: For me the setup was fairly easy, I know the well will produce more than I can pump and I am pumping into a 1 acre pond rather than a tank so I did not bother with any of the level switches that turn the pump on and off based on well or tank level. It was just splice the wires together (I used a well splice kit from Menards), hook up the drop pipe (I used 1” poly pipe for potable water usage), connect a safety rope and drop it in the well casing and hooked it up to the solar panels. The only hiccup I had here which maybe the manufacturer can correct is that the tags on the pump cable (w, v, u) were not correct and made the pump spin backwards which results in the impeller unthreading and popping out. We switched one set of the wires at the controller and pushed the impeller back in and then when the pump started it re threads the impeller back in as it is spinning the correct way. I would recommend putting the pump in a 5 gallon bucket and starting it up briefly to ensure it is spinning correctly and pumping water. This would have saved us from having to pull the pump back out of the well after the initial startup attempt. Regardless it didn’t damage anything or cause too much grief so I am not docking it any stars for that. Performance: This little pump has exceeded my expectations. The pump curve they supplied seems to be accurate and maybe even a bit conservative in how much flow you should expect. The water level in my well is right at 130ft below ground and this pump is able to fill a 5 gallon bucket in under 1 minute (5.85 gpm). The controller also has worked well for my application as it shuts off when the sun isn’t shiny and runs on and pumps when it is shining. I am using 8 x 100w solar panels and still only get max rpms for about 4 hours a day. So if you think you can get by with 500w of power you will likely be disappointed. From what I can tell the controller tries to maintain ~70-75 volts by adjusting the pumps rpm’s up to 4000rpm. There really isn’t great instructions on any adjustments or settings changes on the controller to adjust really anything. I tried to press the “settings” button and it just give like a p-0 message that you can adjust but I have no clue what I am adjusting so I just least it alone. It has performed well out of the box with the default settings. Overall, it has been good so far for the money. The well company wanted to charge me 7500 for a solar pump setup so for the tots cost of this system I have saved a lot of money and still get good performance out of it. ... show more
Reviewed in the United States on April 13, 2022 by LunaDawn LunaDawn
    • Top Notch Customer Service
Size: 500W-393ft
Have bought and using 5 of these on the ranch to supply water to cattle. Needed another option than the power company. Contacted customer service for replacement part they responded immediately with No charge you Rock Jenenseries
Reviewed in the United States on August 27, 2023 by Rambo
    • Had to up the voltage.
Size: 500W-393ft
Unit is set at 320 feet below surface. Had to increase voltage at the control unit so i would have 48 volts by the time it ran through 360 feet of wire. Now working fine.
Reviewed in the United States on April 14, 2023 by William Ellison

Can't find a product?

Find it on Amazon first, then paste the link below.