iSANMATE 3D Printer Filament, Tri-Color PLA Filament 1.75mm Bundle, Color Changing PLA Rainbow Filament, Coextrusion Silk PLA +/- 0.03 mm, 250g x 4 Spool
Condition: New
Buy Now, Pay Later
As low as
$8
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
20 left in stock
Arrives
Sunday, Aug 30
Recently Viewed
Color: A- 4 Pack Tri-color
Features
- Tri-Colors PLA Filament- Unique colour change effect will make you get a magic model and attract everyone's attention.Color: (Rose Red,Green, Blue/Orange, Green, Blue/Gold,Purple,Copper/Red,Yellow, Blue)
- Premium PLA +- iSANMATE 3d filament without warping, clog-free, bubble-free and easy-to-use, smooth and delicate, less entanglement by machine winding, no tangling and easy to feed. with excellent layer adhesion, and easy support removal, and works perfectly with most FDM 3d printers on the market;
- Recommended Printing Conditions- The Printing Temp is 195C-225C (depending on the printer model)which is wider than typical PLA, Printing speed: 50-100mm/s. Hot bed temperature: 50 60C;
- Sealed Package- Silk filament will be dryed for 24 hours before packaging, then packed with Vacuumed Sealed. Since the PLA filament is easily damp, please store it in a resealable aluminum foil bag after opening to maintain excellent printing performance;
- Technical Solutions-Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply.
Description
iSANMATE offers PLA, PLA+, PETG, PVA, ABS, PC, PA, flexible TPU, PEEK, PPSU, PEI, and so on. iSANMATE filament is a new member of Amazon, but over the years our printer filaments have been sent to users around the world and have been well received. Now we supply high-quality printer filament at Amazon directly to you. We are confident that you will enjoy the printing when using the 1.75mm Filament. Tips: 1, Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 2, Be sure to insert the free end of the PLA+ filament into the holes to avoid being tangled for next time use. 3, If there is no print plan within a few days, retract the filament to protect the printer nozzle. iSANMATE is committed to the highest quality standards in production and manufacturing. iSANMATE 3D Printer Filament was born out of the passion for technology and exploration of the future, while always placing customers at the heart of all development, and gives you the freedom to implement your projects and ideas by 3D printing. Yes, iSANMATE PLA+, PETG filament has ROHS and CE certificate. Yes. Our engineers have tested more than 98% of printers using 1.75mm filament, they are applicable. And also can be used to 3D pen. 1)Check the temp setting before printing, PLA temp about 190-225℃; 2)Check if the plate surface, it is recommended to apply PVA glue;
Brand: iSANMATE
Material: Polylactic Acid
Color: A- 4 Pack Tri-color
Item Weight: 1.23 kg
Item Diameter: 1.75 millimeters
Brand Name: iSANMATE
Additional Features: Color Changing Effect
Manufacturer Part Number: PLA-DC08
Unit Count: 35.27 Ounce
Manufacturer: iSANMATE
Number of Items: 4
Number of Packs: 4
Model Number: PLA-DC08
Warranty Description: 2 months
Item Weight: 1.23 kg
Item Diameter: 1.75 millimeters
Material Type: Polylactic Acid
Color: A- 4 Pack Tri-color
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Aug 30
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: B- Clear-skyblue
Filament was excellent! Perfect color, perfect transparency, printed perfectly. Looks very high quality. Exactly what I was looking for (really hard to find transparent light blue). A little bit pricey, but honestly not too bad overall since it was perfect. If you need a lighter blue transparent filament, this is exactly what you need. This is the only filament I could find in this color. Microcenter filament that’s darker blue is the same price so feels fair. If I end up needing more of a similar color I will definitely come back and buy some more. Printed on Ender 3 Pro.
...
show more
Reviewed in the United States on June 15, 2026 by V
Color: B- Color Pla Glow Blue
This stuff is impressive! Prints clean and glows much brighter than I expected it to!
Reviewed in the United States on August 16, 2026 by Daniel R
Color: B- Glitter Rainbow Pla
Edited: The company sent me a spool from a different batch and it had no issues so I have updated my stars to five stars. Hopefully the one spool was the only bad batch. Beautiful colors but breaks so easily and breaks during projects. Filament will literally just snap out of no where. Has got stuck in the tubing from just snapping randomly. So much was wasted because of how brittle it is. Beautiful coloring but not worth it when it constantly breaks and ruins projects in the process. I should give it 1 star but decided on 2 stars because the coloring is beautiful. If only the product wasn’t so poorly made.
...
show more
Reviewed in the United States on September 25, 2023 by Alchemist
Color: A- Glow Multicolor, Green, Blue and Blue...
Let me count the ways in which I feel ripped off. 1) As displayed in my uploaded image, the consistency of this filament is abhorrent. I am using a brand new JS1 Snapmaker and the filament has been grinding the drive gears of the extruder like a rookie truck driver. Never in all of the years I have been doing 3D prints, have I come across a filament that actually gets stuck in the Bowden tube to the point you have to yank it out backwards in an unloading scenario. The print that I am working on, was to be an 18 hour print, but it is now 26 hours because every time I walk away and do something constructive else where, it decides to get stuck and make the JS1 stop and wait for me to return to essentially, yank the filament out, and load it back in. 2) One would assume these would be a full size roll but alas, that is not the case. These are 4 mini rolls of frustration and wasted money with an odd coating that is grainy and full of friction. Luckily I had my SUNU drier and have been literally cooking the roll as I print but even so, it has jammed twice. Wonderfull, because we all know how awesome it is to have a large print stall out or quit on you when it is assumed the product you bought would be just a tad bit better on the quality side. Might as well try to 3d print log chain and see how that pans out. 3) "Glow" doesn't seem to be glowing in the colors that are pictured. In fact, all 4 of them, have the same sick green glow to them so..not sure where the variety pack is in all of this, but it is safe to say they didn't know either, grabbed whatever was laying on the floor and threw it into a box for me to suffer their lack of QC. Either way, I will not buy another product from this company as it is painfully obvious to see, their deceptive practices know no bounds. If it did not take forever to get filament from Snapmaker, I would order nothing but Snapmaker filament because it is far superior than most of what is here on Amazon, other than Hatchbox, which is now my new go to Filament company at this point. (Overture also has issues with overlaps, snags and just horrid PETG)
...
show more
Reviewed in the United States on July 10, 2023 by mike beck
Color: A- Color Petg Glow Orange, Green, Blue, ...
Not bad but some of the colors don’t glow as advertised. The green is fantastic. It prints well and the glow is amazing and long lasting. The orange prints well, it glows a sort of yellow green. The blue is darker by default and glows a dull blue, it also had some misprints, the others didn’t. All three of them are fun and somewhat long lasting if they’re exposed to a bright light. For the record, I’ve been both leaving them in a lit room and also occasionally charging them up with a lantern with a super bright LED in the bottom, you know, for science…. and then there’s purple… I was excited about purple and it was the first one I loaded up. It printed well. It takes a lot of charging in the lantern LED(while the others barely took any) and it glowed a dull purplish grey and for not near as long as the others. It maybe because of the darker pigment in it or something. I was hoping for something electric. I love the green, though, can’t recommend it enough if glow in the dark is what you’re looking for.
...
show more
Reviewed in the United States on December 11, 2025 by CLP
Color: B- Glow Green Pla
With my very first 3D printer, I could only print with ABS. At that time, I frequently printed in a Glow ABS. Kids just seem to be really intrigued by Glow-in-the-Dark items and it was a big seller back then. I have looked for PLA in a glow for quite some time and the only items I found were way to over priced for my tastes. Then I stumbled across ISANMATE's Glow in the Dark Filament and decided to give it a go. When the box arrived and I opened it, I saw the same quality packaging that I always see in ISANMATE's filaments, solid box with a nicely vacuum packaged roll of filament. Removing it from the package only took a few minutes and it was set to print. I really appreciate the quality of the spooling of the filament. Nice even rows of filament shows that ISANMATE takes the time to get it right the first time. I normally do a test print, without running a Temp Tower, just to see hoe the filament prints with "Standard Settings" The Benchy printed beautifully on my MK3s. Once the print was done, I let the print sit in the bed and cool and soak in the light. Then I turned off the lights to see how well the glow would show. Some filament I have tried in the past, had a very low glow and it was difficult to take photos without adding some additional light. Not so for this filament, these photos are straight from my phone. There is a little bit of stringing visible but a few extra degrees of heat will fix that and then these will be perfect. The last image is what 3D printing is all about. Our old Christmas tree star died and we had to buy a new one. The star came with a terrible mount that looked like it was made from the top of a milk carton. as tall as our tree id, the star would never fit on top with that stupid mount. I took the mount from the old star and testid it. The "Chip Clip" design is great and allows the star to be mounted lower on the tree and that way it clears the ceiling. The mount had a green tube on top that fit the old star but didn't fit the new one, it was bigger. After 15 minutes of time in the modeling software and 30 minutes of print time and the new star was on the tree. The glow filament isn't as white/white as the star but buried in the tree, you'll never notice. All in all, I have come to like ISANMATE's filament and the price is very hard to beat. If you need to GLOW, give this filament a try!!
...
show more
Reviewed in the United States on November 26, 2020 by GorillaBob
Color: B- Glow Green Pla
Review is for the: "iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool" As with most any filament from the factory... it works best when dried for 10+ hours. Many people report how brittle this filament is & yes, wet filament is brittle. So, dry it first. Then it will work well. I have had great prints with the Glow filament. After charging off a Bright light for 20 minutes, it will last for a few hours. Thicker prints works best of course, as there is more product to glow. Good detail can be printed with this. Important to have the settings correct, as the Glow is actually a PLA+ which melts at a higher temp than PLA. Appears to be a bit stronger than PLA, but not like a CF or PETG. I would purchase again. Be sure to dry it first.
...
show more
Reviewed in the United States on February 17, 2025 by Complimentary
Color: B- Glitter Blue Violet Galactic
First time buying from this company. Nowhere on the box or the spool, nowhere, does it say that it's PLA. I think that is sort of strange. I had to go look at the amazon ad to make sure it was PLA. Out of the box, the end snapped like uncooked pasta. I loaded it and tried something that was basically a cylinder with 3mm walls. It got halfway through and went to spaghetti. Strike two. I'm now printing a very tall "vase" with lots of angles and fins and stuff, in vase mode (1 layer thick walls) and it's working fine so far. Very strange. So I'm not sure whether I like it or not. Also, it's advertised as transparent blue and purple. The walls don't look like it's morphing from blue to purple and back again. Mostly just all a pale purple. Not unpleasant, but I was looking for more contrast. It might be OK, but I'll never give it 4 stars. 3 is generous.
...
show more
Reviewed in the United States on February 17, 2026 by David G.