CFL55 Compressed Spot Laser Module, 0.1mm*0.1mm Laser Spot, 5.5W FAC Laser Module for Genmitsu 3020-PRO MAX V2, 3030-PROVer MAX, PROVerXL 4030, 4030V2 & 4040-PRO, 4040 Reno CNC Router
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$25.33
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 9 left in stock, order soon!
Arrives
Sunday, Jun 8
Recently Viewed
Features
- Improved Power & Accuracy: This new laser module has a focal spot of 0.1mm x 0.1mm much smaller and consistent than current generation modules, allows for a leap in power and accuracy. It can cut 4mm plywood in one pass. Note: The output power is 500mw, this is a laser class 4 module, please wear necessary protection when using it.
- Stock Air Assist Nozzle: Light-weight aluminum air nozzle delivers improved engraving speed and quality, protects your optics from smoke and dust for better performance and laser lifespan.
- Longer Operation Life: Fixed focus laser diode with upgraded heat dissipation will let the module operate for extended periods with a longer operation life.
- UV Laser Shied Protection: The laser head comes with a laser shield to filter laser radiation and avoid accidental laser exposure for safer operation.
- Compatibility: This laser module is only compatible with Genmitsu 3020-PRO MAX V2, 3030-PROVer MAX, ProverXL 4030, 4030V2 & 4040-PRO, 4040 Reno CNC Router, Jinsoku LE-1620 Laser Engraver, Jinsoku LC-60A Laser Engraver & Cutter. Note: If you are using the latest PROVerXL 4030 V2, you may encounter adaptation problems, please contact Sainsmart's support team via email or our official website, we will provide you with a free replacement cable! Contact page
Brand: Genmitsu
Material: Aluminum
Style: Laser
Item Weight: 0.56 Kilograms
Operation Mode: Automatic
Brand: Genmitsu
Material: Aluminum
Style: Laser
Item Weight: 0.56 Kilograms
Operation Mode: Automatic
UPC: 816550025208
Global Trade Identification Number: 08
Manufacturer: Genmitsu
Part Number: 052002585
Item Weight: 1.23 pounds
Package Dimensions: 9.09 x 6.02 x 3.23 inches
Item model number: CFL55
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
Date First Available: January 7, 2022
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Jun 8
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
I purchased this module for a PROVerXL 4030 primarily to cut thin plywood, and so far, I've been very impressed. The laser cleanly cuts through 2.5mm plywood in one pass at 280mm/min, which is fantastic. I've also been able to cut both black and white 1/8" acrylic, which is excellent. I have yet to try cutting thicker plywood or hardwoods, or any engraving, but I'm confident it will do the job. I also purchased a very small $25 fish tank pump to provide air assist. One plus side of mounting a laser on a CNC router (rather than a less expensive dedicated laser cutter/engraver) is the laser software can do a Z-stepdown between passes to change the focal point, which significantly increases cut depth - although this comes with a caveat: the air assist nozzle comes quite close to the material being cut, so if you want to do lots of Z-steps, you probably won't be able to use the air assist. My only real complaint isn't really about the laser, but rather the LaserGRBL open-source software - it's clunky and lacking features - but that's really not a knock on the laser itself. If I was less cheap, I'd just buy LightBurn (and I still might). Installation was pretty much as easy as could be - the laser plugged right into the control box with the provided cables and turned right on. I did have one nitpick: as some other reviewers noted, the screws that came with the laser mounting plate for the 4030 weren't long enough to reach the threaded holes in the back of the laser modules. Fortunately I had some longer screws on hand, but it would have been VERY annoying otherwise. All in all, if you already have a compatible CNC router this module is an inexpensive way to start laser cutting and engraving, reusing the equipment you have!
...
show more
Reviewed in the United States on January 14, 2023 by Lance Menard
While this isn't the most powerful laser, it works well and is easy to get the correct focus using the supplied gauge. I use this on my CNC router to give it the capability to laser projects. I don't use it for cutting materials, but it has enough power to engrave wood and tile. This laser is mounter on my Genmitsu 4030 and the LASER TREE 20W 40W 80W Interface Adapter Board Transfer Board was not needed for this application. I have used Laser GBRL and Lightburn to control the laser and haven't had any issues with either one.
...
show more
Reviewed in the United States on June 10, 2024 by Scottsw1
The first one I ordered broke within a minute - the blue LED stopped blinking right in the middle of the first test image. The SainSmart support at first requested too much info like pictures of all the receipts for the laser and the CNC machine, the cable I use, etc. But after I said that it is easier for me to just return it and get another one, they actually provided helpful guidance, which proved that the laser was defective and the CNC was OK. The replacement I received shortly works fine - cuts and marks the wood and plastic. But all my attempts to mark metals failed. I tried the Brilliance laser ink hoping to get at least some readable mark - no luck. And Gemnitsu do not make more powerful lasers for my PROVerXL 4030, which is very unfortunate.
...
show more
Reviewed in the United States on January 7, 2025 by euggg
Install was easy not hard to do. Do use the connecter supplied by the unit. Only issue I would have, could not find all the specs about the unit as needed when setting it up in the software.
Reviewed in the United States on January 1, 2024 by Wolf Schwarz
For the prover xl 4030 v2 the instructions included are completely wrong. For this machine it sits inside the 52mm bracket. Had to contact sainsmart for those instructions (they included pics which was great!). 3 stars for now just based on that. I have not had time to fully test. Edit; Went to test and it did not work at all. Fan would not turn on and the laser would not fire. Tried multiple softwares including the sainsmart recommended LaserGRBL. Sainsmart nor amazon could figure out so I returned and got the same one. It arrived today and it's exactly the same as the first. Does not work at all. Rating down graded to 1 star.
...
show more
Reviewed in the United States on March 11, 2024 by Joseph G
I've had this unit for about 1 month. It seems well built and setup is easy. Beem is very tight (.1mm x.1mm) making it good for fine detail. Usable cutting depth is a bit overstated but otherwise it's a nice unit.
Reviewed in the United States on June 9, 2022 by Seahurst Runner