Fulton Veneer Scraper with Beveled Edges and Hardwood Handle for Applying

Features

• GET RID OF AIR BUBBLES - If you have ever applied veneer to any type of substrate material then you probably know that a hand roller tool works pretty well but leaves air pockets or bubbles behind almost every time. Thats where the Fulton Veneer Scraper steps in. With its beveled edges and long hardwood handle, youll be able to work out every last air pocket or bubble all the while gaining maximum adhesion to your substrate!
• GET EXCELLENT ADHESION - The Fulton Veneer Scraper is designed to be used on veneer when it is bonded to a substrate using contact cement or PSA backed veneers. The basic idea with this simple but very useful and effective tool is that all of the leverage of your arm and hand force is concentrated at the tip of the tool. This focuses all the pressure to the wood veneer sheet or wood edge banding and allows you to gain excellent adhesion.
• RIGID NON FLEX MATERIAL - The scraper is made from a very rigid plastic material that doesnt flex or give. This along with the beveled edges allows you to focus heavy pressure as needed on your veneer wood. The scraper measures approximately 3-11/16 wide by 2-1/16 tall.
• COMFORTABLE HARDWOOD HANDLE - The hardwood handle is approximately 11 long and approximately 5/8 thick. We have shaped the handle so its comfortably curved to fit into the palm of your hand. This makes it easy to grip and wont dig or tear into your hand while applying heavy pressure. The thick hardwood stands up to repeated, heavy pressure scrapes on project after project after project.
• VENEER SCRAPER BASICS - Starting from the center of your veneer, drag the scraper tool outward in the same direction of the wood grain. Make sure you are always going with the grain. Scraping across the grain will likely damage the veneer. Be sure to go over the entire veneer surface area to achieve the best possible bond with the adhesive. We recommend using the Fulton Veneer Scraper in conjunction with the Fulton Long Handle J Roller Pressure Tool (sold separately) for optimum results.

Description

The business end of the scraper has beveled edges so the scraper doesn't dig into or tear at your wood veneer sheet when applying pressure. The Scraper is ready to go right out of the package with no need to de-burr the edges. The 5/8" thick handle is not only comfortable to grip and use, its also very rigid and sturdy. It will stand up to repeated and prolonged use for years of workshop service. The scraper and the handle together were designed to provide the right amount of leverage to be able to achieve the best bond possible between your veneer and substrate. A vinyl floor roller for vinyl flooring or veneer works pretty well but leaves air pockets or bubbles behind almost every time. Simply angle the Fulton Veneer Scraper and pull or drag the scraper from the center of your project outward toward the edge. This will pull all of the imperfections (bubbles/air pockets) to the edge of your substrate, similar to a veneer iron. Starting in the center of your project (1) and working your way outward in sequential order will help you cover your entire workpiece. Always remember to go with the grain of your veneer when applying pressure with the veneer scraper. Going against or across the grain will likely damage your veneer.

Manufacturer: ‎Peachtree Woodworking Supply Inc.

Part Number: ‎10246

Item Weight: ‎5.6 ounces

Product Dimensions: ‎11.3 x 3.7 x 0.62 inches

Item model number: ‎10246

Material: ‎Plastic, Wood

Item Package Quantity: ‎1

Included Components: ‎(1) Veneer Scraper

Date First Available: June 8, 2021