Electric Mini Tank Water Heater,2.6 Gallon Instant Hot Water Heater,1500W 110V,Small Hot Water Heater,with Digital Display for RV Kitchen Bathroom
Condition: New
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
$13.33
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Color: Blue
Style: 2.6 Gallon
Features
- Electric Mini Tank Water Heater-The Electric Mini Tank Water Heater,1500-watt heating system delivers instant hot water in seconds without preheating,with more safety protection such as anti-freezing protection,over heating protection, 4 gallons of hot water can be output per minute. The maximum temperature raise is 158 F.
- Durable and Long Service- The internal materials of instant hot water heater electric 110v are made of high-temperature calcined layer and enamel layer, which have corrosion resistance, rust prevention,and anti-corrosion properties.Stainless steel heating tubes and built-in magnesium rods can effectively purify water quality and extend service life.Integrated stainless steel tank body and Polyurethane CFC-free filling layer ensure the stability of the tank body and excellent insulation.
- Super High Efficiency-Small Hot Water Heater Energy efficient with plenty of hot water,also known as demand-type or instantaneous water heaters, provide hot water only as it is needed,our water heaters with thermal efficiency up to 90%,Instant hot water at the point of use, whenever needed,Also equipped with a high-definition intelligent digital LED display,effortlessly adjust the temperature between 86F-158F according to your preferences.
- Easy Assemble and Use-This Electric Tank Water Heater,for 1/2" NPT water hose connection,with Leakage protection fitting 1/2" NPT, pressure relief valve, two 3FT hoses,4 gallons small tank water heaters,Compact design,The product dimensions are 14.5 x 9.8 x 10.6 inches, can be wall or floor-mounted in a discreet location.
- Satisfaction Guarantee-We feel confident that you will love our mini tank water heater. If there's something makes you unsatisfied, please don't hesitate to contact us. We would offer you 100% refund or a replacement within 3 months.
Brand: forimo
Product Dimensions: 14.5"W x 10.6"H
Special Feature: Anti-Freezing Protection, Over Heating Protection, LED Display, Leakage Protection Fitting
Color: Blue
Wattage: 1.5E+3
Brand: forimo
Product Dimensions: 14.5"W x 10.6"H
Special Feature: Anti-Freezing Protection, Over Heating Protection, LED Display, Leakage Protection Fitting
Color: Blue
Wattage: 1.5E+3
Voltage: 1.1E+2 Volts
Maximum Flow Rate: 4 Gallons Per Minute
Maximum Temperature: 158 Degrees Fahrenheit
Efficiency: 90%
Mounting Type: Wall, Floor
Is Electric: Yes
Manufacturer: forimo
Item Depth: 8.6 inches
UPC: 717181613614
Part Number: Electric Tankless Water Heater
Item Weight: 13.72 pounds
Country of Origin: China
Item model number: Electric Tankless Water Heater
Special Features: Anti-Freezing Protection, Over Heating Protection, LED Display, Leakage Protection Fitting
Included Components: NO
Batteries Included?: No
Batteries Required?: No
Date First Available: June 8, 2024
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: White
Style: 4 Gallon
I live nomadically 6 months out of the year and custom built a trailer and decided I'm tired of the propane water heaters so I gave this a try. It works great for the money and I run it on my 3000 watt power inverter installed with the switch so I turn it on about a half an hour before I take a shower and it heats the water up just fine for a short shower and with a thousand watts of solar panel and 600 amp hours of battery I still have plenty left to get me through the night with my refrigerator the television and running the microwave a couple times it's a lot more efficient than I expected
...
show more
Reviewed in the United States on November 27, 2024 by DrBeary
Color: White
Style: 4 Gallon
This Electric Mini Tank Water Heater comes with a limited “Installation Manual”, but no Operating or Programming Instructions. To make matters even more fun, the water heater shipped to us had a Spanish Display! First, about those installation instructions. They appear to have been created for a European or Asian market, as they reference 220 volt power. But the plug on the heater is a standard U.S. configured 3-prong 120 volt plug. Another reviewer had noted that, but I still thought, I can handle that. In fact, it does function very effectively on 120 v power. Check the ends of the inlet and outlet pipe. If they have a rust buildup, or scale on the threads, like mine did, this should all be wire brushed off before wrapping Teflon tape around the pipe. Turning a fitting onto the pipe with scale or rust on it will be like having sand in the joint, and it will shred the Teflon tape, assuring that the joint will leak. (Guess how I learned?) Because the pipe threads are cut to the DIN(15) standard, instead of NPT shape, there is no taper to the joint, and simply turning it on further will not correct a leaky fitting. Be warned, however, the small component, consisting of a one-way check valve and a pressure-relief safety vent, is a failure from the get go. See my photo and sketch of the device, and simply note that if you include this in your installation, any water vented through the relief valve [ "C" in my sketch] will drip out at the shaft opening for the handle, [ "E" in sketch ] instead of flowing through the provided hose. The sketch shows why. I ended up deleting both the relief valve on the water inlet side, and the component that I took to be a galvanic isolator on the outlet pipe, and substituting in their places two 1/2" PVC 90° elbows, female NPT on one side, male NPT on the other. These provide perfect galvanic isolation, and a more effective transition from the DIN(15) threads on the pipes on the heater to the NPT connections of the hoses you need to tie to your domestic water system. If your home has an expansion tank above the main water heater – typically a metal cylinder of about 2.5 gallons capacity – that protects all fixtures in your home from thermal pressure buildup—the relief valve is redundant. OK, moving on to controlling the installed Water Heater. If you are in the U.S., and don’t read Spanish any better than I do, and you are lucky, your Display is labeled in English! I did persuade the seller to provide me a photo of the English display, which includes the text I will reference in what follows. I have included a photo of the Display with this review. As noted, it differs from the pictures in the listing, so who knows? After filling the tank with water, plug in the power cord. The display will light up, and beep to indicate it is ready to be programmed. Most of the display is lighted with a very pale turquoise glow, but there are some other colors here, too. And the meanings of some of the text may not be obvious. Temperatures display in Centigrade – there is no Fahrenheit option. Times will be displayed in a 24-hour mode. The four flat bars at the bottom of the display provide a general sense of how high a temperature the heater has been set for. ① SWITCHGEAR At the right side, is a RED Power-On, Power-Off symbol and the accompanying label, “Switchgear”. This is a pressure sensitive toggle switch. Pressing this turns “Off” the Display and the heating function. But when you press it again to re-illuminate the display, the Heating Mode ( see item #4, below ) will have selected “Intelligent Heating”. ② CLOCK My first instinct was to set the clock. To do this, use a “slow-press” on the “Time” button near the bottom center of the display. It looks like a round analog clock, with hands indicating 7:00. After holding this in for three to five seconds, the triangular touch pads labeled “UPWARD” and “DOWNGRADE” will begin to flash about once a second. The four-digit time display to the left of the label “CLOCKS” may be adjusted using these two arrows. Note however, the “UPWARD” pad always increments the hour setting, while the “DOWNGRADE” does not reverse that, it only increases minutes. If you overshoot, just cycle through. Holding the touch-pad in will speed the change. ③ TEMPERATURE Kind of the elephant in the room, the big digits at the left edge of the display show the current temperature of stored water. Smaller digits to the right of that indicate the set target temperature. To adjust this target temperature, press the UPWARD arrow to increase the set temp by 5°C, press the DOWNGRADE arrow to reduce it by 5°C. (Note how different this is from setting time.) The lower and upper limits to this are 30°C, and 75°C, and adjustments may only be made in 5 degree increments. (These limits equal 86°F and 167°F. ) Adjusting past these values simply cycles to the opposite limit. As the set temperature changes, the white and red bars under the time display will change. Below 55°C, only white bars are lighted. Above 55°C, you start to see red. Typical domestic hot water temps are 120°F, or about 50°C. With those limits in mind, it is interesting that the photos within the listing show a 'set temperature' of 98 degrees. That's 208 degrees Fahrenheit, just shy of boiling water. But then, text on the display in those photos differs from what I was sent, too, so maybe the cheat-sheet I was sent is outdated? ④ HEATING MODE The full intent of this switch remains a bit of a mystery. It may be helpful to think of it as a “Control Mode” selector. The switch itself is the group of three wavy lines, looking something like “SSS” curves above the label, “Heating Mode”. Pressing it cycles through three illuminated labels, all shown in the accompanying photo, but only one will appear at a time on an active display. These read, “Segmented Heating”, “Intelligent Heating”, and “Heating by Appointment”. Since the cycle of illumination moves right to left, and the “Heating by Appointment” is the mode I am most confident I understand, we’ll deal with that next. So, press the “Heating Mode” switch to light up the Appointment. . . . ⑤ RESERVATION I take this to be establishing a schedule of active, and inactive hours of the day. During what I call active hours, the heater will keep water within a couple degrees of the set temperature. While the water is being heated, the red text “Heater” is displayed. Once the temp reaches its set point, that red text disappears, and you see a green label, “Thermos (bottle)” – yes, that’s what it says, parentheses and all! During the inactive period, the power to the heating element is off. Press the Reservation icon, which looks like a clock with hands indicating 5:00. The label at the far left of the display reading “timed opening” will illuminate, and the UPWARD and DOWNGRADE arrows will be active to set a time to begin the ‘active’ period. (I set ours to 6:00.) After getting the time display you want, press the Reservation icon again, and the “timed out” label will light in place of the “timed opening”. Again, using the UPWARD and DOWNGRADE arrows, adjust Hours and Minutes to set a time for the heater to coast. Selecting the Reservation option also illuminates the Heating by Appointment label. While this is lit, the Clock display cycles through showing the current time, the Opening time or beginning of active operation, and the Out time, or end of scheduled operation. This label must be lit for the selected active and inactive times to be applied. ⑥ INTELLIGENT HEATING There are two ways to select the Intelligent Heating label. Pressing the “SSS” Heating Mode switch repeatedly cycles through the labels at the top of the display, and may be used to select Intelligent Heating; alternatively, pressing the Switchgear icon repeatedly, and turning the whole display off and then back on, will default to the Intelligent Heating mode. In this mode, the active vs inactive periods defined with the Reservation option are ignored. The system simply attempts to hold the water at the set temperature. ⑦ SEGMENTED HEATING When the Segmented Heating label is illuminated, the system appears to me to operate the same as when Intelligent heating has been selected. If the set temp is above the water temp, the heater will come on.
...
show more
Reviewed in the United States on February 20, 2025 by A Puzzled Tinkerer A Puzzled Tinkerer
Color: White
Style: 4 Gallon
The heater seems to be good to bad they didn't send a book on how to setup the heater nothing tells you how to set the clock or the temperature is only in Celsius also no directions on how to set up the heater and fittings
Reviewed in the United States on March 15, 2025 by Charles
Color: White
Style: 4 Gallon
Well, let's start with the positive. It does heat water. On the negative side, the list is longer. First, none of the connections to this unit are NPT, except the two flex hoses included. Once I figured that out and altered my plumbing plan accordingly I got it installed. Once I filled it, plugged it in and turned it on it was obvious, as shown in the picture, that the setpoint and clock displays were defective and unreadable. One of the main reasons I bought this particular unit was it appeared to be programmable so that the heat could be turned off when not needed. There appear to be three operating modes. Since there were no programming instructions included, I don't know what they do or how to get them to do it. Since I can't set the clock or the heater setpoint, I don't think I could make it happen anyway. Amazon politely sent me a replacement unit. I thought instructions and a working display might be included. There were no instructions and the displays had the same problem as the first unit. I will be returning both and moving on.
...
show more
Reviewed in the United States on November 18, 2024 by Karen Grape Karen Grape
Color: White
Style: 4 Gallon
The hot water is quickly depleted when water in the tank is replaced by cold water. It would be good for a bathroom to wash hands. Not suitable for doing dishes in a temporary kitchen.
Reviewed in the United States on January 14, 2025 by Jay Yankacy
Color: White
Style: 4 Gallon
Missing part but they sent me one with part and works great .very fast heat up about 8 minutes in cold weather.
Reviewed in the United States on November 12, 2024 by V
Color: Blue
Style: 2.6 Gallon
it dos not keep the water hot
Reviewed in the United States on March 10, 2025 by JEFF
Color: Blue
Style: 2.6 Gallon
The seller\manufacturer does NOT supply a bracket that allow you to hang this heater. Also, no instruction manual to set any of the features.....both are inexpensive to add....
Reviewed in the United States on April 26, 2025 by john donahue