DURAMIC 3D Shiny Silk PLA Filament 1.75mm Silver, Shiny Silver PLA Filament Dimensional Accuracy +/- 0.05 mm 1kg Spool(2.2 lbs)
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$6
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Jun 22
Recently Viewed
Color: Silk Silver (Pantone: 431c)
Features
- Shiny SILK PLA Duramic 3D launches new Silk PLA series to give you smooth shiny metallic finish without need for polishing. It adds not only perfect SILK gloss to your arts and crafts but also features the advantage of easy printing of PLA.
- Upgraded Cardboard SpoolDuramic 3D Pinter SILK PLA filament 1.75mm has gradually upgraded to cardboard spool along with dual stickers, which allows convenient sorting and full recycling. The filaments remain the same formula and quality.
- Accurate &Consistent DiameterDiameter: 1.75mm, tolerance 100% 0.05mm, 99.9% 0.04mm, 99% 0.03mm and 97% 0.02mm.
- Wide Options for Color Duramic 3D SILK PLA Filament 1.75mm offers more than 10 different colors for you to creat fun and shiny gadgets.
- User-Friendly & Compatible- Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling.
- Printing PerfomanceFinish: Shiny surface, smooth finish. Printing performance: good bed adhesion and layer adhesion, no warping and clogging. Material: great strength, hard to be deformed or broken.
- Reconmmended Printing SettingsNozzle Temp: 21010C, Bed Temp: 50-60C, Printing speed: 30-70mm/s.
- Risk-free ServiceOne-month free trial, lifetime quality promise and technical printing support and money-back service if youre not 100% satisfied.
- User friendlyThe length scale and weight scale make it easy for you to monitor the remaining length and weight roughly. Empty spool weight: 14015g, you can get the exact weight of remaining filament if you need to.
Brand: DURAMIC 3D
Material: Polylactic Acid
Color: Silk Silver (Pantone 431c)
Item Weight: 1 Kilograms
Item Diameter: 1.75 Millimeters
Manufacturer: DURAMIC 3D
Brand: DURAMIC 3D
Item Weight: 2.2 pounds
Product Dimensions: 7.87 x 7.87 x 2.6 inches
Item model number: Silk PLA
Color: Silk Silver (Pantone 431c)
Material Type: Polylactic Acid
Manufacturer Part Number: Silk PLA
Date First Available: December 2, 2020
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Jun 22
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Yellow (Pantone: Yellow U)
This is a review I've been meaning to do for a year now... but as an "after hours" professional I wanted to wait until I could truthfully speak my mind about any brand of PLA. Durmaic had this big bold claim back in the day about becoming your "go to" filament if you gave them a chance... well, I have to admit they were right. To give you my back story- I run a small game design, music product, and 3d printing brand called "Fishwife Games". I primarily sell stuff via a tabletop role playing game distribution site, and all my stuff is download digital format. In the interest of 3d printing, I design and sell STL files- still, I need to test print what I sell before it goes up for purchase and download. I do try different brands of PLA to see what problems can occur, just as much as I've tried different 3d printers. When it comes to not wanting to deal with the hassles now, and my own stuff- I keep rolls of Duramic PLA hooked up to the 3d printers. Hatchbox I'll admit runs along side from time to time, but I've gotten so that I prefer Duramic. Duramic has a pretty good balance of what I call "chewiness"... its not very brittle- but then not so "chewy" (or bendy, or whatever you want to call it) that there's a sacrifice on detail or difficulty in cleaning up small parts. Now- while we are talking about small parts- that's the win for me. What I design in stuff for miniature gaming- things are set on what is called "28mm scale (to 30mm or "classic 28mm")"... which means stuff is roughly at a 1:64 normal scale... a lot of detail, very small, very easy to break with trying to get the supports off during clean up (yeah, most stuff requires supports- I prefer Tree supports myself). These elements matter- from tiny detail to forgiveness when my tired old eyes and clumsy hands are trying to remove something off a 2 hour+ print without breaking it. Some filaments I've had to give up on, so far Duramic has come in through. I must say if asked about the difference between PLA and PLA Plus with Duramic I haven't really come to a conclusion yet- I'll leave that to the manufacturer to answer. I've provided some images of some of the custom things that I've designed and test printed. While alot of it will end up being flat blacked and painted over I must say that color matters when you are taking sample photos. That's what I want to finish up talking about. All Duramic filament has been good to me, don't get me wrong, but if you are going to do some small detail stuff like this, and unpainted at that, then color selection can matter. I have several colors of Duramic lying in inventory but so far I've only used the light green, gray, silver (not silk), cyanblue, and yellow. I'll give my ratings for each below based on my particular needs. Early Winner- Cyanblue! See the little blue robot- that's the only thing I've printed so far with this color but WOW do the details pop with it! the cyanblue pulls in the right amount of light and shading. I don't know how well it is yet with hiding filing and clip off points but it certainly does a good job representing the little details. Its a nice color, and it pulls in light well. Reliable Winner- I love the light green. I've just finished my first roll of it and I have at least two or three more waiting under my work table. It shows just enough details under the light while also hiding blemishes well. Detail does pale in comparison to that blue, but if you are worried about the little nicks, sanding scuff marks, etc. showing up too much then go with the light green. Old Standard- Gray. A medium gray is generally the standard tone for printing small miniatures and such due to its ability to show details well in light. Sometimes it tends to show the imperfections a bit more so I prefer the light green. Still, if you need a good medium, go with gray. Not So Sure About- Yellow. The little mushroom is the first thing I've printed with my new yellow roll and I'm not so sure about it. I must say that this is not Duramic's fault- yellow is not the easiest on showing off small details as far as colors go. It will be fine once a coat of flat black is on it, but for an unpainted show off tone I don't know if I'd recommend it for small miniatures. I still plan to run through the roll though. Least Fave I Have To Admit- Silver (not silk). Like yellow, this is not really the manufacturers fault. I also must say that I've done some larger, non-gaming pieces in this plastic that turned out beautifully. What i have found with the silver though is that it is bad for showing off sanding blemishes and other assorted printing/clean up imperfections. You know how plastic tends to "whiten" a bit when it bends or something is scrapped against it?- the silver does this well. Granted, its not a bad plastic- I'll finish out the roll- but for here on out I'll probably avoid it unless I'm doing stuff that is bigger and calls for a metallic look unpainted. All that said above, I have to give Duramic 5 stars. Put a little thought into color if you can when doing high detail work- but otherwise the filament should continue to be a reliable "go to" as they claim.
...
show more
Reviewed in the United States on January 18, 2021 by Dave W Dave W
Color: B-white (Pantone: White C)
I have been 3D printing on various printers for over 10 years and have used many different brands and types of filaments. This have become my favorite brand. The combination or quality, performance, and price is truly unbeatable. The ease of printing and quality has been consistently high. Unlike some other filaments I have used, the operating temperature range for this filament is wide (prints well between 190-220 F). Highly recommended!
...
show more
Reviewed in the United States on September 4, 2023 by droid-dude
Color: Marble
I was recommended this brand about a year and a half ago by one of my friends as he was listening to me curse out another failed print due to some poor preforming filament, and I'm glad he did as honestly this is one of the best filament brands I've used. I've tried filaments from over 10 brands over the years of owning 3d printers, and honestly out of the 5-7 rolls of this brand I've used it has given me consistent results every time. I've even had a roll sit for a few months, and it worked perfect which is something I can't say about other brands.
...
show more
Reviewed in the United States on August 15, 2023 by SyCo
Color: B-glow Green
Okay so it’s the exact same as any other normal PLA, but I have it 4 stars because the glowing isn’t really noticeable unless you hold a light up to it for a second or 2. Like in the pic I shined a flashlight at it for a few seconds.
Reviewed in the United States on September 1, 2023 by Jennifer Kaplan Jennifer Kaplan
Color: B-glow Green
I was originally worried if the glow would be super dull or if it wouldn't really work because of the heating and cooling of the filament. It works great, very happy with the prints.
Reviewed in the United States on September 5, 2023 by Shannyx27 Shannyx27
Color: B-glow Green
This filament looks white but glows in the dark! My 11 year old sells his 3D prints and gets many requests for this glow in the dark filament! Will order again!
Reviewed in the United States on September 4, 2023 by Amazon Customer
Color: B-glow Green
This is my first experience with glow in the dark filament. It works great. In the day it is a kind of an off white color. It hides the layer lines nicely like a lot of white filament does. It glows very well too.
Reviewed in the United States on August 29, 2023 by Matthew R
Color: Black (Pantone: Black 6 C)-2 Pack
I have used Duramic PLA Plus and PETG filaments for a couple of years now on three different printers. (Qidi X-One2, Creality CR-10V2 and Elegoo Neptune 3 Max) Dozens and dozens of spools of it. I also played around with several other brands to get a feel of what is out there. These guys aren't the "only" good brand out there, but when I just need something to print, and print well, I get a few spools of Duramic. It just works. It extrudes consistently, stringing is on par or better than anything else that I've used, dimensional accuracy is good and layer adhesion is excellent. No tangles. Tangling is almost always due to the user not anchoring the cut-end of the filament on the edge of the spool when not in use. It'll drop down and work its way under other turns of itself without you noticing, and the spool will tangle and bind up later in a print. Any filament will do that. I have no complaints with this product. Highly recommended.
...
show more
Reviewed in the United States on June 26, 2023 by Sam Jackson