Search  for anything...
Design Engineering

Design Engineering, Inc. Black Titanium Exhaust Heat Wrap 2" x 50'

  • Based on 2,060 reviews
Condition: New
Checking for the best price...
$62.99 Why this price?
Save $15.65 was $78.64

Buy Now, Pay Later

As low as $10.50 / mo
  • – 6-month term
  • – No impact on credit to apply
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

FREE 30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Monday, Aug 31
Order within 18 hours and 33 minutes
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Size: 2" x 50'


Color: Black


Features

  • EXTREME HEAT PROTECTION Withstands continuous direct heat up to 1800F and intermittent spikes up to 2500F, protecting exhaust pipes, components, and wiring from extreme heat damage.
  • LAVA ROCK TECHNOLOGY Made from premium pulverized lava rock fibers interwoven with fireproof materials for superior durability and heat resistance compared to traditional fiberglass wraps.
  • REDUCES UNDER-HOOD TEMPERATURES Cuts radiant heat by up to 50%, lowers intake air temps, and prevents horsepower loss due to extreme heat, improving overall engine performance.
  • ENHANCED PERFORMANCE Maintains high exhaust gas velocity, increases exhaust scavenging, and helps optimize system efficiency for better throttle response and horsepower gains.
  • EASY INSTALLATION & DURABLE DESIGN Pliable tape features a proprietary weave for secure installation around bends and curves; resists chemicals, oil, vibration, and heat soak for long-term performance.
  • Made in the USA

Description

Design Engineering, Inc. Black Titanium Exhaust Heat Wrap with Lava Rock Technology is a high-performance, pliable exhaust wrap tape designed to handle extreme temperatures and reduce under-hood heat by up to 50%. Made from pulverized lava rock fibers interwoven with fireproof materials, this premium wrap withstands continuous direct heat up to 1800°F and intermittent spikes up to 2500°F, protecting exhaust pipes, wiring, and nearby components while maintaining high exhaust gas velocity for improved performance and horsepower gains. The proprietary weave allows easy installation around bends and curves, while its chemical, oil, and vibration-resistant design ensures long-term durability. Ideal for automotive, marine, powersports, and industrial applications, DEI’s Titanium Exhaust Wrap lowers intake air temperatures, reduces heat soak, shields sensitive components, and enhances overall system efficiency. Made in the USA with over 30 years of expertise in heat and sound control, this exhaust wrap delivers professional-grade performance, protection, and reliability.

Brand Name: Design Engineering


Manufacturer: Design Engineering, Inc.


UPC: 607078100030


Global Trade Identification Number: 30


OEM Equivalent Part Number: 10003


Included Components: Black Titanium Exhaust Heat Wrap with Lava Rock Technology, 2" x 50' Roll


Item Type Name: Exhaust Heat Wrap with Lava Rock Technology


Model Number: 10003


Manufacturer Part Number: 10003


Unit Count: 1 Count


Manufacturer Warranty Description: DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.


Fit Type: Vehicle Specific Fit


Automotive Fit Type: Vehicle Specific Fit


Part Interchange Info: 010003


Color: Black


Material Type: Basalt


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, Aug 31

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • Zip Pay in 4
  • Financing through Apple Pay
  • Financing through Google Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Proven high quality wrap
Size: 2" x 50' Color: Black
Used this on my downpipe and it made a noticeable difference in under-hood temps and heat soak immediately. The material feels much higher quality than a random fiberglass wrap, and it's pretty flexible. It's held up well so far, definitely worth it if you're trying to manage heat.
Reviewed in the United States on May 3, 2026 by Lorcan Welton
    • Perfect Muffler and Tailpipe Repair
Size: 2" x 15' Color: Titanium
Hi Folks Greg Muncer here with Advanced Fleet Specialists of 37 years. I have a 1988 Chevy Caprice that is in great shape. The exhaust pipes and muffler needed 6 repairs. I search this product down; not wanting to replace the exhaust system. I followed every direction and added these things. 1) I scrubbed an area around the repairs about a third away around the pipes, with a stainless steel wire toothbrush, and with Clorox Clean Up (spray) and a spray water bottle to thoroughly rinse the area after the wire brush and soapy bleach scrubbing. Then I quickly wipe the area mostly dry with a paper towel so it did not flash rust much. 2) I tape measured the repair area to make a patch about an inch longer than the ends of the repair area. 3) I bought off Amazon here, one roll of " DEI 010129 2" Titanium Exhaust/ Header Wrap - 15' " for $14.95. This 2 inch wide exhaust wrap was a dog's great fetch, ("a cat's meow" ha ha), I took the Muffler Putty " Permatex 80333 Muffler and Tailpipe Putty - 4 oz. " , available here on Amazon also, and needed it (which mixes it just prior to use), like the directions said. I screeded the packet to the edge where you cut the packet open, then I cut only about 1/3 the end off, to be able to squeeze out about a 1 inch wide squeeze out of the packet. I squeezed the putty onto the measured and cut exhaust wrap mention above. I squeezed the putty onto the middle of the 2 inch wide tape all along its length. I then took a stiff piece off plastic, for a putty knife and smoothed the putty over the tape, covering every edge. (I had laid the tape on a cardboard box to dispose of the mess made on a workable disposable surface) So, spread the putty thoroughly a little less than 1/4 inch thick on one side of the tape. 4) With the tape spread with putty, I took my water spray bottle and wetted the repair area again. This time I only dried it very lightly, leaving it wet but not dripping. I dabbed up the drips with a paper towel. I then place the putty side of the tape against the wire brushed and wetted repair area; where the puttied tape patch, hung over the repair area about an inch on each end. I used disposable latex gloves and so with these gloves on, I smoothed the outty all over the tape which brought some of the extra putty to the edges of the tape. While smoothing the tape out, I had some putty come through the tape that is a little pores. (Careful to leave the center of the tape humped up a bit on its center length, so as to leave a good thickness of putty over the holes in the pipe or muffler). Extra putty from the packets can also be used over the outside of the tape to seal up the pores tape. Smoothing over the complete tape patch and its edges with putty makes a smooth cast like product, just like a cast use for a persons broken arm, except this cast is good for extremely high heat. 5) Once you get your patch smoothed out on the repair area, I set a 1500 watt (small heater withing an inch of the surface of the wet patch. I found that the patch had to stay as hot as this heater would make it, for at least an hour or longer is better. (I had one place that I could not get the heat close enough to make the pipe hot for an hour and, when I drove the car (without giving it much gas) the patch had not sufficiently hardened and the path lift off one end and the exhaust was escaping out the repair hole again)> Point is make sure you heat the patch good for at least about an hour. I found the heater made the patch and pipe hot enough that you could still touch it without burning your hand but, probably you could not leave your hand on the hot patch more than a few seconds without burning your hand. This should give you a good idea as to how hot to make the patch. It could even be a little hotter than this, although I like a slower curing process so, that it does not bubble up from too quick of hot heat causing the putty to boil before it hardens. Keep in mind that this tape over the putty slowes down the drying process and so the heater and the whole hour heating the patch seems to become absolutely needed. In summary this is a fantastic product and the tape really helps to bridge the gaps and maintain a real good consistent thickness of the repair. I used 3 packets out of the 4 packets that I bought. (Each of these purchase packs contained 2 packets inside each pack, so I used 6 little packets altogether.) Each tape patch average about 8 inches long and was applied long ways onto the pipe. I did not wrap the tape patch around the pipe except for one of the repairs that required it. The 2 inch wide tape came in a 15 foot roll and I used a little less than 5 feet of it. I paid $3.40 a pack and used 3 packs so I used about $10 bucks of putty and $5 bucks worth of the tape; so I used $15 dollars of product to make 6 beautiful patches. (I wasted some, when I did not let the one patch heat up hot enough and long enough). Use a heater, wire brush the area and get any greese off the repair area with a soapy bleach. Rinse it well with water (the putty is water based), pre wet the repair area just before applying the wet patch. My exhaust system was strong before I began and was being held firmly by all connections and exhaust hangers, but every pipe, muffler and resonator require a sizable patch and so it this $15 bucks worth of muffler putty and 2 inch wide tape save me the best part of $1,000. I feel confident I will not have to replace this exhaust system for another few years. Thank You Amazon, Permatex and Design Engineering; maker's of the 2" Titanium Exhaust/ Header Wrap - 15'. Happy Motoring, Sincerely Greg (I still spent 6 hours repairing the 6 areas) but just paid $15 bucks. Both these products, the putty and the tape were good up to temperatures of 2,000 degrees, oh yea. ... show more
Reviewed in the United States on May 3, 2012 by Gregory Muncer
    • Does not fade or differ in shades
Size: 2" x 25' Color: Titanium
Review Image by Michael. Kyne
Review Image by Michael. Kyne
Wow I bought the right wrap. Great price and quality. Bought red on ebay and it lost the color. This stays spot on as the color goes. Highly recommend
Reviewed in the United States on May 26, 2026 by Michael. Kyne
    • Worked great on my 2000 GMC Sierra 5.3!
Size: 2" x 100' Color: Titanium
I bought the titanium thinking it wouldn't frey and get all over the place like normal fiberglass does. ITS THE SAME! This stuff is gonna get everywhere, and its gonna get on you and your clothes. You're gonna itch. Should also do this in an area with good air circulation. Outside of dealing with that, its more or less straightforward. I used it to wrap the headers on my GMC pickup. I got the 100' and wasn't sure if i'd have enough, but it was PLENTY for the driver and passenger headers, with enough to spare. This helped because I messed up a few times when I originally started, cutting the length a little shorter than necessary. Make sure you get some quality stainless steel bands (basically metal zipties), and you'll be in good shape. Once installed, they look great! Headers don't burn through my plug wires anymore either! ... show more
Reviewed in the United States on October 21, 2019 by MJ
    • Very happy with this wrap
Size: 2" x 25' Color: Titanium
Review Image by crystal hoke
Very happy with this wrap. Have had it on my bike for a couple of thousand miles. This wraps easier and looks better than cheaper versions. Feels less itchy than others. It is easy to install if you soak it it hot water. Have not had any stray fibers and still looks good. Hardware was not included but used a wide stainless hose clamp. The thin stainless clamps work better for other applications ... show more
Reviewed in the United States on March 30, 2026 by crystal hoke
    • Quality products
Size: 2" x 50' (Smaller Packaging) Color: Titanium
Very good product, have to watch youtube video how to cut it with aluminum foil. No need to keep in water for 2 days, make sure you keep it as tight as possible
Reviewed in the United States on May 19, 2026 by TJ
    • Good buy
Size: 2" x 35' Color: Titanium
Works well reduce heat
Reviewed in the United States on July 25, 2026 by Martin g.
    • Nice but frays easily
Size: 2" x 15' Color: Titanium
The first thing I noticed when I opened the package is how cool this stuff looks. It looks sort of like carbon fiber. In reality it's made of very thin strands of metal bundled in threads and then woven together. [Update: I tested the temps with an infrared thermometer and I'm not extremely impressed. Even with two layers of the DEI wrap, the temps ranged from 350-500F on the wrap itself. I can't say how this compared to before I wrapped it though since I didn't take the temps. But I expected it to be lower.] The downside is that it seems to fray if it gets caught on anything. The part I was wrapping was in a really cramped area so after many feet of wrapping some parts started to fray, particularly the ends and sides, but if a thread in the middle gets caught it will pull out in a loop and distort the area around it, and you can't fix it. If you've got room and you're careful you could probably avoid the problem by being careful not to let it catch on anything or move it around too much so it rubs on itself or other stuff. In my opinion this product could really be improved by just sealing the ends and possibly the sides. It comes with the threads on the ends cut so they're just hanging there waiting to unravel. The sides are interwoven though so it's not as big of a problem. Another slightly less serious problem is that, although it's not fiberglass, it still has some of the same irritating effects. From all the microscopic strands fraying you find yourself itching certain spots a lot presumably from the them acting like glass strands and sticking into your skin. I can't say how safe it is to potentially breath these strands either, but since they're metal I'd assume they wouldn't be as airborne as fiberglass, asbestos, etc. ... show more
Reviewed in the United States on April 12, 2011 by Ryan

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...