Deep Pour Epoxy Resin Kit | 3 Gallon (11.4 L) | 4'' Deep Pour & Casting Epoxy Resin | Low Odor | Crystal Clear & High Gloss | For River Tables, Casting

Unlike other brands of epoxy resin who will yellow over time, our epoxy resin products contains UV Inhibitors which helps to resist yellowing. Being one of the first company to offer epoxy resin used for artistic applications we had many years of expertise to develop the strongest products for our fellow artists. After receiving many feedback, we took action to develop an extremely resistant epoxy resin which is scratch-resistant, impact-resistant, water-resistant and heat-resistant. Our products are Made in USA and Canada. We only use the finest raw materials to offer the best quality to our customers. This means you can enjoy a No VOCS product which is food safe once fully cured. Having a clear, hard and shiny end project result is always desired when working with epoxy resin and that's what you can expect with our epoxy resin products! Our Deep Pour & Casting resin is the perfect product for your river table project. Mix our epoxy resin with any color to create your dream table! Being low-viscosity, the resin is able to penetrate and fill even the smallest gaps and cavities. Thus, it makes the perfect epoxy to create casting projects where you want to preserve objects with the clearest result possible. Any deep pour project that you think of can be achieved with our Deep Pour & Casting epoxy resin. It cures to a crystal clear appearance or can be tinted with our powdered or paste pigment colorants. Being a low-viscosity epoxy resin made especially for deeper pours, you can expect your project to be bubble-free and clearer than any other epoxy resin on the market. Into a mixing cup, pour twice the amount of resin (A) for each measurement of hardener (B) (2:1 ratio). Ex.: 500ml of resin (A) with 250ml of hardener (B). If you measure by weight (g), use mixing ratio 100A:45B. Ex.: 300g (A)with 135g (B) Stir both parts together for 4-5 minutes. Make sure to scrap the sides while stirring. Once done, you have up to 6 hours of working time. Make sure that your project is leveled and pour the resin on it. DO NOT scrap the resin out of the container, just dump it and leave the remaining material in the container. Tip: 15 minutes after pouring, you can quickly pass a blow torch a few inches over the resin to pop all the extra air bubbles. Your project will be tack-free after 2 days and cured in 3 days. This curing time helps to release as many air bubbles as possible, and allows for deeper pours. If you need to do an additional pour, you can do do so between 18 to 28 hours after the last pour. If you wait longer than that, you will need to sand your project with some 180 or 220 grit sandpaper.