Search  for anything...
Creality

Creality Ender 3 Max Neo FDM 3D Printer Ender 3 Max Upgraded with CR Touch Automatic Leveling Dual Z-axis Red Metal Extruder 32-bit Silent Mainboard 11.8 x 11.8 x 12.6 Build Volume Grey

    • Based on 100 reviews
Condition: New
Checking for product changes

Notify me when this product is back in stock

$353.00 Why this price?
Save $37.00 was $390.00

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Unavailable
Fulfilled by Amazon
Available payment plans shown during checkout

Recently Viewed

Color: Red


Features

  • 300 x 300 x 320mm Large Build Volume:With the 300 x 300 x 320mm Large Build Volume and an open print chamber, you'll be able to print large 3D models with ease, or you can print several small models at the same time on the large build surface.
  • CR Touch Automatic Leveling:Equipped with CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. Good efficiency saves much time.
  • High-precision Dual Z-axis:With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.
  • Power Loss Recovery and Filament Sensor:Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
  • Upgrade Red Metal Extruder & Low-noise Design:The new upgraded extruder without pneumatic joint has high gear density, feed-in smoothly, greatly improving the performance of printer; and the brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.

Brand: Creality


Material: ABS, Metal


Color: Red


Product Dimensions: 11.81"D x 11.81"W x 12.6"H


Item Weight: 10.32 Kilograms


Product Dimensions: 11.81 x 11.81 x 12.6 inches


Item Weight: 22.7 pounds


Item model number: Ender 3 Max Neo


Date First Available: June 15, 2022


Manufacturer: Creality


Frequently asked questions

This product is currently out of stock. Please check back later for shipping info.

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Excellent printer. I was impressed.
Color: Red
This printer has met my requirements. I like to use it. I have been using it for almost a year and I am truly very happy. At first I didn't know how to use it, the software was a bit complicated for me, once I mastered it it seems quite simple. My impressions improved more and more.
Reviewed in the United States on November 4, 2023 by JOHNNY G MEDINA C
    • Auto home feature has issues
Color: Red
I really like my 3d printer, but I frequently run into homing failures when trying to start a print.
Reviewed in the United States on July 15, 2023 by Steven
    • Nice Printer Large footprint
Color: Red
Out of the box not to bad to setup, just be careful unboxing there's nothing to tell you that the tower section is connected to the base by the wiring, I almost ripped the wires out, but other than that it was a breeze to put together, instructions are kind of vague but if you have some common sense you can do it, first print came out perfect, we have an Ender Pro 3 which took allot to learn, it is not a touch screen, it still has a dial but some things are much better in the system than before, super quite not like the Ender 3, I did flip the Glass Bed so the print would not have a textured surface to start, it now has a count down timer to know hom much time is left on the print, it is a little hard to load the filament because of the sensor but if you follow the instructions and cut it at a 45 it was much easier to feed in, make sure to do a manual bed level first, then use the auto level after, it senses the bed 25 times during the auto level process you would think this would take forever but it's faster than the BL touch only doing 9, that's about it. ... show more
Reviewed in the United States on September 4, 2022 by Nicole
    • Good Bang for Buck When on Sale
Color: Red
Review Image by Robert R. Blanchard Robert R. Blanchard
Review Image by Robert R. Blanchard Robert R. Blanchard
My only issue is my SD card seems to be erroring out, I keep having random errors but no alarms I just walk back to check and see "an error occurred" and I can hit continue. I did have some runaway temp issues but it was just the power supply not set for my house wall sockets. I am replacing the SD card seems to be a problem that isn't too common but at the same time slightly common. My other SSD came with my ender 3 v2 neo and does seem to work with no issues making me conclude something is off with my card that came with this one. But that is my only gripe. It has a glass bed so not 5 stars on Adhesion but she prints so much nicer than my ender 3 v2 neo, a simple Elmer glue stick fixed adhesion issues. ... show more
Reviewed in the United States on December 10, 2022 by Robert R. Blanchard Robert R. Blanchard
    • First 3d printer ever.
Color: Red
Review Image by Robert Robert
Review Image by Robert Robert
The media could not be loaded. Assembly is super easy it was a little difficult to line up the holes to screw it together but others no issues. I'd suggest watching a tutorial on YouTube for clear instructions. The manual is helpful but It is vague on some of the setup. As far as printing goes once I leveled the bed properly my test prints came out flawless! This is my first experience with anything 3d related and I am very happy I started with this printer. The automation takes away alot if my stress. Once again I highly advise watching YouTube tutorials for assembly and print setup! The bed is super adhesive, I had to level my bed initially because it wasn't sticking, but that's operator error not printer error. I thought I'd want a touch screen but so far using the knob is super easy. Would recommend for any beginner. ... show more
Reviewed in the United States on November 30, 2022 by Robert Robert
    • Easy to use, hard to believe the price
Color: Red
It's hard to believe something this complex can be so cheap and easy to use. Granted you need to have a little bit of technical know how, but if you follow the directions included this thing is unbelievably easy to set up and print things with. I have read early adopters of 3D printing spending months to get their first print right, it took me three tries before I had this printing perfectly, and a lot of people seem to get it going on the first try. Really a quality product at a very reasonable price. ... show more
Reviewed in the United States on January 3, 2023 by SomeReviewingGuy
    • May have finally got one that works.
Color: Red
Review Image by Joe S. Joe S.
I have fought through more than 10 printers with limited results. This one, so far, seems to be what the company claims. The setup is a little odd, but what it has printed is excellent. I just hope it continues to work this well.
Reviewed in the United States on August 26, 2022 by Joe S. Joe S.
    • Stay away.
Color: Red
Not sure how this thing is getting such great reviews, mine was busted out of the box. The extruder motor on mine was not working. Turns out it’s a common problem that requires you to fiddle around with the motherboard (which means disassembling the entire machine), replacing a bad cable (we’ll get to that), or replacing the motor. The cable however is hot glued to the motor so there’s no safe way to check that, and I’m not poking around at the motherboard when I already paid $300+ for a WORKING printer. Just spend your money on a better printer and avoid this one. ... show more
Reviewed in the United States on October 23, 2023 by Jared W

Can't find a product?

Find it on Amazon first, then paste the link below.