Creality 3D Printer Filament PLA 1.75mm 2KG, Creality Official Hyper PLA Filament,2Pcs 2.2lb/1kg, 600mm/s Designed for High-Speed 3D Printing (White)
Condition: New
Buy Now, Pay Later
As low as
$8
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Friday, May 8
Recently Viewed
Color: Pla - White*2
Material Type: Polylactic Acid
Features
- Gradient Filament Parameter: Hyper PLA Filament Print Temperature: 190 - 230C, Recommended Temp:220C. Printing Speed: 30-600mm/s, Filament dimensional: 1.75mm,Accuracy +/- 0.03mm
- Official Creality Filament: That is perfectly compatible with most of the 3D printer and 3D pen,such as Creality Ender 3 V3 Plus, Ender 3 pro,Ender 3 V2, Ender 3 S1 ,Ender 5 S1,K1 Max CR 6, CR10, and more mainstream brands printers
- Tangle Free,Moisture Free: Creality Filament is carefully winded to avoid any tangling issues. Vacuum packed with desiccant to prevent dust and moisture
- Fully Eco Friendly: Creality Hyper PLA is made out of non-toxic bio-materials extracted from corn. We have enhanced the pla pro filament with a new paper-spool based on the concept of environmental protection, resulting in cost saving and reusability
- Smooth and Stable Printing: Improved formula and manufacturing process ensures smooth, clog-free printing
Brand: Creality
Material: Polylactic Acid
Color: Pla - White*2
Item Weight: 4.4 Pounds
Item Diameter: 1.75 Millimeters
Manufacturer: Creality
Brand: Creality
Item Weight: 4.4 pounds
Package Dimensions: 8.62 x 8.23 x 5.55 inches
Color: Pla - White*2
Material Type: Polylactic Acid
Size: 2 KG
Manufacturer Part Number: LD-3D-PM-HPPLA-2KG
Date First Available: June 24, 2024
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, May 8
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Space Pi Plus
Material Type: Filament Dryer
Easy to setup. Works great. The only negative I would give this is the touchscreen is a little finicky.
Reviewed in the United States on November 7, 2025 by Mikie
Color: Space Pi
Material Type: Filament Dryer
What can I say this things awesome. I don't even remember when I bought it but it basically been running nonstop since I got it. I run it straight from the dryer to the printer. You can print little upgrades for it thatll improve its performance. Works great and I highly recommend.
Reviewed in the United States on December 6, 2025 by Amazon Customer
Color: Space Pi Plus
Material Type: Filament Dryer
Game changer for printing sensitive filaments. Unless I'm printing something like PLA that's already dry, I run filament directly out of this into the printer. Having two slots allows me to actively print one filament, and dry another roll at the same time. I like the preset options for PLA, PETG, PC, etc. but always read from the manufacturer what the recommended drying temps are, especially for PLA. A couple nit-picks, the touch screen could be more responsive, or be physical buttons ideally. The roller bearing shafts are kind of small too, so you may want to print little 'spacer' cylinders for the spools to roll on; that's made a big difference. There is some noise, but it's a large hot fan so that's to be expected. It's actually fairly quiet for what you get. All in all it's a good item for the price, and doesn't feel super cheap.
...
show more
Reviewed in the United States on October 29, 2025 by Harrison Brown
Color: Space Pi X4
Material Type: Filament Dryer
This is a very solid dryer. It gets to temperature quickly and then quiets down. Far quieter than the previous versions I tried. Nice responsive touch screen and I like that the lids lock. Deduction for not having preset times for various materials. I have to use my AMS to see what it recommends and then plug it in here. It should also have the ability to rotate while heating. The filaments come out very flexible and I haven't had any issues printing with them after.
...
show more
Reviewed in the United States on January 13, 2026 by Steve G
Color: Rainbow-wild Blossom L
Material Type: Polylactic Acid
This is a great filament works way better with my husband 3D printer than any printer we’ve used before .
Reviewed in the United States on December 18, 2025 by Kacy bailey
Color: Space Pi
Material Type: Filament Dryer
The media could not be loaded. Full disclaimer, I bought both of these with my own money. The sunlu had raving reviews and the creality had no reviews at the time of my purchase. I decided to compare these since I could not find someone else who did it. I was going to build one but for ~$50-60 I thought it was not worth my time to make one DIY. Power cords: creality uses standard 120V slim ac power plug (148W), same as playstation/TV/other small electronics Sunlu uses 24V 2A power brick with barrel plug (48W). This is unacceptable in 2024, either use standard AC power adapters or USB-C Power-Delivery The biggest complaint about the sunlu is the fact that the charger is from the rear of the dryer on the long side (since the LCD is on the other) this means that you cannot lay it up against a wall because the cord gets in the way. It also falls over very easily. The creality does not. Heat/drying ability: creality is much more capable outputting heat, as it draws 148W maximum, tripling the heating ability of the sunlu at 48W maximum. this translates to filament drying faster in the creality, the sunlu stays barely warm while the creality is hot to touch (but not uncomfortably hot). The sunlu has a max runtime of only 6 hours (creality 48 hours) which sucks for wet filament since it can take well over 12 hours to fully dry. In fact, I once woke up with my filament more wet in the morning than it was at night because it had shut off and I left my window open. This being said, I do not like that both are only suspended on ball bearing rollers, I felt that the creality was a little uneven heating the bottom rear side of the filament more than the rest, with the front side of the fillament (facing the panel) staying the coolest. this can easily be fixed by adding a motor to rotate the filament like a rotisserie chicken, I am not sure why no one uses that idea yet, I will likely modify my creality to do this using a microwave oven plate motor. Noise: Creality has a kinda annoying hum from the fan. It is much quieter than my printer but definitely audible and annoying if in the same room. I will likely replace it with a silent fan. the Sunlu is quiet. Screen: Sunlu screen is turned on by double tapping, it uses an LCD panel with a manual LED backlight. Light turns off automatically after a a minute by default which really bothers me as it sits under my dark desk so I have to keep tapping it to turn on. Even after setting LED-ON, the backlit panel turns off after a few minutes and the led-ring stays on. Creality screen is turned on by pressing and holding for about two seconds (light pressure). It stays on until you turn it off and is a modern looking color lcd-panel. I like this panel better, i think it is better looking and more responsive, although i wish it had an AMOLED or OLED. Lid: both feature clamshell designed lids, however the creality lid is a better fit and has no holes in it. The sunlu has two holes in the lid. It sometimes closes without fitting into the lower piece so you have to mess with it so it closes properly. both lack a gasket for sealing so I would not expect either of them to function well for long term filament storage, although the sunlu would fair worse with the more-poorly fitting enclosure and two unsealed ports on the lid. Price: I bought both on sale, it was about $55 for the sunlu and $60 for the creality so the price at the time was about the same, even if it was $10-15 more it would be worth getting the creality. If the creality had a gasket around the shell, an optional motorized roller, had a larger space inside (for 5KG spools), space for desiccant, an automated feed system (such as bambulab AMS) and AMOLED/OLED panel, this would easily be the best filament dryer ever made. Especially with a glass/metal body and cover I would easily pay over two hundred dollars for it. Returning the sunlu. Keeping the creality. Thanks for reading.
...
show more
Reviewed in the United States on March 1, 2024 by Dick Cheney Dick Cheney
Color: Rainbow-spring Lake
Material Type: Polylactic Acid
Works well, kids loved it.
Reviewed in the United States on January 11, 2026 by Charles in Florida
Color: Space Pi Plus
Material Type: Filament Dryer
I did a lot of research on filament driers and this Creality Space Pi came out on top. I can see why. It is easy to use and definitely has made a difference in the print quality coming from my printer. I don't print all that often, so when I would go to do a print, my filament would be brittle and tended to print "ok" but not great. I did a test print where I grabbed an old roll and printed a model, then dried it in the Creality Space Pi and there was a significant and obvious difference. It was like I was printing with a brand new roll of filament. It does take some getting used to the touch screen as I feel there is a bit of a delay after touching it and the response of the screen, but I find the touch screen easy to use and see. The fan noise is noticeable, but not loud. Just a slight hum in the background. I like the fact that the air is blown around the inside of the unit instead of just a heating element that just warms the unit. If you are on the fence on getting a filament drier, get this one. You won't be disappointed.
...
show more
Reviewed in the United States on August 5, 2025 by Brad