Cooler Master MasterCase H500M ARGB Airflow ATX Mid-Tower with Quad Tempered Glass Panels, Dual 200mm ARGB Fans, Type-C I/O Panel, Vertical GPU Slots & ARGB Lighting System
Condition: New
Buy Now, Pay Later
As low as
$43.33
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
17 left in stock
Arrives
Friday, Sep 26
Recently Viewed
Size: H500M
Style: ATX Mid-Tower
Pattern Name: Case
Features
- Four Tempered Glass Panels : Edge to edge glass side panels on both sides, a glass top panel, and a glass front panel offer a clear and comprehensive system view
- Glass & Mesh Options Included : Choose between the glass front panel for a balance of aesthetics and performance or run full mesh for optimized airflow with the included accessory
- Rich Connectivity : The I/O panel comes with a USB 3.1 (Gen 2) Type C port, and 4 additional USB 3.0 ports.Body material:Steel
- Covers For Clean Building : A total of 9 covers take clean building to the next level with a PSU cut out cover that provides the option of showing off your PSU or leaving it out of sight
- Two 200 millimeter Addressable RGB Fans & Controller : Move air stylishly and quietly with 2 Addressable RGB Fans controlled by an included ARGB controller
- Expansion Slots: 7 Plus 2
Description
The Master Case H500M, form and function you can raise your glass to. Four panels of tempered glass offer a comprehensive system view, complimented by two 200mm addressable RGB fans. Cycling of lighting color and mode is made possible by an addressable RGB controller. Both the front mesh panel and glass accessory are included to offer a choice between maximum airflow and aesthetics. Each of the front panel options compliment the industrial design of the H500M in their own method. The covers on the frame and PSU shroud offer extra customization while keeping builds clean from cables. The top panel is compatible with two optional 200mm fans accompanied by a 360mm radiator to ensure options for high performance cooling components.
Wireless Type: 802.11a
Number of USB 3.0 Ports: 4
Brand: Cooler Master
Item model number: MCM-H500M-IHNN-S00
Item Weight: 2.2 pounds
Product Dimensions: 21.42 x 9.76 x 21.5 inches
Item Dimensions LxWxH: 21.42 x 9.76 x 21.5 inches
Color: H500M ARGB
Batteries: 1 A batteries required.
Manufacturer: Coolermaster
Country of Origin: China
Is Discontinued By Manufacturer: No
Date First Available: June 11, 2018
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, Sep 26
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: H500P Mesh White
Style: ATX Mid-Tower
Pattern Name: Case
When I purchased this case, I had never built a PC before. I'd also recently ended my 5-year career as an electrician to go to law school. I needed a hobby & a way to satisfy my need to build stuff. Well, I have gone to town on this case and loved it. Most of the black screws it came with are half silver from me taking it apart so many times. The case is big enough to be a sort of "blank canvas" for just about any configuration you can imagine, albeit with some limitations: I think it's a bit small for a 16mm OD PETG custom loop; I wish it had been designed to support bottom intake fans; and the top clearance for a 360mm AIO/radiator is too small for a push/pull configuration. Keep in mind if you continue to read, I am running an overclocked i9-10900K & need as much cooling capability as possible (with all case parts still properly attached, of course) The stock 200mm fans look good and move a decent amount of air, but I replaced them with higher CFM (& IMO better-looking) Thermaltake Riing Trio 20s. Be mindful: the screw hole configuration for front 200mm fans is different from that for the TT 20s I put in. The stock CM 200s support two different screw layouts. Limited by the layout, I mounted the TT 20s diagonally with two screws & used double-sided adhesive foam to dampen any noise vibration might cause from the 2/4 screw mount. I haven't heard noise once. There is no bottom fan support, but I was able to push some air up to the top AIO by cutting in a 2" hole on the front HDD shroud & mounting a 120mm fan over the hole. I wish I didn't get an HDD since the rack is easily removable (& moveable btw), leaving ample space for more modification--might make some bottom fan support in the future, who knows? Similarly, the case does not support mounting a radiator/AIO to the right of the motherboard, but the metal cover there is great for cable management and is also a good place to mount RGB/fan controllers &/or USB hubs out of sight. Further, a little drilling, a few washers, nuts, & 6-32s later, the metal cover is great for holding up my little Pikachu acrylic. The vertical GPU mount is great, but know that--in my case, at least--the card will end up close to the glass, which may restrict air flow to the GPU fans. I have yet to have any issues with thermals, but I am also running a 3060 there, which is limited much more by its hardware than thermals. I also added a GPU support because the GPU sagged a bit and was slightly crooked when only connected to the vertical mount. When using a top-mounted 360mm AIO/radiator equipped with standard 120x120x25mm fans, the fit is tight. The back fan pushes harder against the 4+4 CPU power connections on my Aorus Z590 Ultra motherboard than I would prefer, but I have yet to experience any problems. If pushing against the cables worries you, be sure to check the dimensions on your AIO before purchasing or opt for a smaller AIO/radiator. I had this issue with both the CM ML360 & Arctic Liquid Freezer II. Furthermore, if you plan to top-mount an AIO/radiator, you cannot fit a push/pull configuration because of clearance issues with the CPU 4+4 connections. I tried mounting pull fans on top of the bracket to remedy this but even using 120x120x15mm slim fans, I could not close the top cover. Obviously, the front is mesh, but the top is acrylic with no mesh option available. Skeptical, I removed the top cover and averaged 5.5 degrees lower in stress tests. I assume this is because my AIO was able to expel exhaust heat much better. I don't recommend you do this, but I ended up taking a Sawzall to the top & removing most of the acrylic so I could fit some aRGB pull fans on top of the AIO. 120x120x15mm fans fit nearly flush with the top cover once the acrylic is out of the way. It snaps out if you do not want to cut it, but that leaves large holes where dust, etc. can get in & takes away from the look. If you go this route (for real, don't do it), you may want to buy grille guards since the fans will be much more exposed. You can front mount an AIO/radiator. I tried it. The hoses probably will not be long enough to reach the CPU if you mount it connections down, and the HDD shroud will further complicate this. Hoses up will reach, but then you're left with the decision of whether to pick from either of two undesirable options. You can (a) flip your 200mms over to the ugly side & use the 200s as pull fans for exhaust and whatever fans the AIO/rad comes with as push fans. In this case, you'll be pulling hot air from inside the case to cool the liquid in the rad/AIO and taking away from the good looks of the case. Alternatively, you can (b) not flip the 200s & use them as push fans and use the AIO fans as pull fans. This blows hot exhaust air into the case. With no bottom fans, you're left with trying to use the top (restricted by acrylic plus hot air rises) or back (supports 1 140mm fan) as intake. I tried (b). I even mounted a 92mm fan on the PCI expansion area to try to push more air into the case. Thermals were bad. Mount your AIO/rad on top & save yourself the hassle. Regarding aRGB, the case comes with this little joke of a controller you can install to convert the computer reset switch to RGB control. I never even took it out of the plastic. Buy an aRGB controller unless you plan to connect the included 200mm fans directly to the aRGB header(s) on the motherboard. Some general advice (since no one asked): try to find a brand you like for aRGB & stick to it. At one point I had four different RGB apps and it's annoying.
...
show more
Reviewed in the United States 🇺🇸 on July 11, 2021 by go0den0w
Size: HAF 700 EVO
Style: E-ATX Full-Tower
Pattern Name: Case
Built like a tank, spacious, premium. However, there are small things that add up to a disappointing experience. Normally, I wouldn't be so picky about such minor things. But I also don't normally spend $650 on a case. The fit for the seem on the glass panel near the top where the two metal plates meet at the front of the case form an "S" bend and don't join neatly together, causing them to overlap. This has an effect of making it look cheap and poorly manufactured. The grommets inside the case have a tendency to bunch up toward the center of the opening. Instead of them being firmly against the opening, they slide off. Everything in this case is tool-less. Except the main retention screw that you need to remove in order to take off the top panel. The top panel is the lynch pin, permitting access to the the rest of the case by allowing you to remove the side panels. You'd think it would be a retention screw on something this expensive. Not so. Hopefully you don't lose this one important screw that's effectively holding together your entire case. The glass inserts on the front panel of the case are exceptionally dirty, requiring me to use some window cleaner and microfiber cloth to get them to a satisfactory appearance. This is despite the many plastic peel films on each side of the glass inserts. In fact, it made the effect stand out more. Dirty and clean glass clashed, making the foggy glass apparent even from 5ft away, especially when lit. Even though this case is large enough to house an enitre smaller computer within its cavernous interior, it lacked enough width to let me use my noctua NH-D15 with both fans (one raised up due to ram) on the cpu cooler. I was honestly shocked since this case is all about airflow. How could you not let the premier air cooler fit in what is intended to be THE airflow case? All in all, I'm satisfied with my purchase. Sadly, Cooler Master decided to forgo the final 10% of effort required to polish this case to a masterful product and at this price point, it hurts a lot more. I've seen more attention to detail in cases 1/3rd the price. If it weren't the fact I had already purchased the case now armed with this knowledge, I would have likely gone with the lian li o11 dynamic and saved myself $400.
...
show more
Reviewed in the United States 🇺🇸 on October 27, 2022 by Amazon Customer