BIQU Cryogrip Pro Frostbite Panda Build Plate 257x257MM for Bambu-Lab P1P, P1S, P2S, X1C, X1E, A1 3D Printers（Blue）
Condition: New
Buy Now, Pay Later
As low as
$8
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Monday, Feb 16
Style: Frostbite(P1P/P1S/P2S/X1C/X1E/A1)
Features
- Perfect CompatibilityBIQU CryoGrip Pro Frostbite is suitable for 3D printers with a platform size of 257x257mm, this panda build palte is perfectly compatible with Bambu-Lab P1P, P1S, P2S, X1C, X1E, A1 3d printers.Please close the detection funtion when you using P2S 3d printer.
- Unmatched Adhesion, Zero HeatBIQU CryoGrip Pro Frostbite delivers unparalleled adhesion for PLA and PETG at room temperature, reducing warping of large prints and remaining scratch and wear-resistant over long periods of time. Realize No Glue required printing.
- Cool and Clog-FreeUniquely designed to print PLA at low temperature, saving heating bed time and 50% energy consumption. The CryoGrip Pro Frostbite prevents your filament from softening and slipping in the extruder due to high chamber temperatures It can also be used for PETG filament (50-70 C). NOTE: Its not recommended to use ABS and TPU filament as they may require the use of a scraper to remove printed parts, which can easily damage bottom.
- Intricate Markings AR Code for Bed DetectionAn AR code is included on the build plate to ensure it is recognized by the X1C, eliminating setup errors for a hassle-free printing experience.
- Effortless Print Removal Bend and PopThe CryoGrip Pro series provides excellent adhesion while still allowing prints to be easily removed by bending the plate. For larger or more intricate prints, use a scraper to gently lift the edges, then pry them off carefully. If a print sticks too firmly, place the plate in a freezer for 10 minutes to assist with removal.
- Scratch-Resistant, Easy to CleanScratch-Resistant & Self-Recovering for Ultimate Durability. A simple wipe restores its adhesion. NOTE: Please use water + soap only to clean the cryogrip pro frostbite build plate. Do not use solvents (e.g., alcohol) as these may cause permanent surface damage.
Package Dimensions: 11.3 x 10.43 x 0.55 inches
Item Weight: 14.4 ounces
Manufacturer: BIGTREETECH
Date First Available: December 4, 2024
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Monday, Feb 16
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: Frostbite(P1P/P1S/P2S/X1C/X1E/A1)
The media could not be loaded. I recently upgraded my Bambu Lab printer with the BIQU Cryogrip Pro Frostbite Panda Build Plate, and I’m beyond impressed. Right out of the box, it feels premium and well-constructed. The 257x257mm size fits perfectly on my A1, and it's also fully compatible with my A1 and X1C. What really stands out is the phenomenal bed adhesion – prints stick firmly during the job, even with tricky materials like ABS and PETG. But once the bed cools down, the parts literally pop off with zero effort. No more scraping or damaging prints! The surface is durable, heats evenly, and has held up great after multiple prints. I've also noticed improved first-layer consistency, which is a huge plus for reliability. If you're looking for a dependable, high-quality build plate that saves time and frustration, this is a must-have. Definitely one of the best upgrades I’ve made to my 3D printing setup.
...
show more
Reviewed in the United States on July 31, 2025 by Danny Vargas
I have had my Biqu B1 SE Plus for a while now, and I really like it after dialing it in. The last thing I didn't like about it was the stock glass build plate. Don't get me wrong, the adhesion on the glass plate is fantastic, nothing moves, ever, even when you want it too. I'm sure there is a "sweet spot" with it because one or two times the print popped right off. The majority of the time I was using the scraper to pry things off and realized that eventually I'd break the thing. With that in mind I went searching for a better option. Now, I have more than a few printers and I've always swore up and down that i would never, EVER peel the film off of a sticky magnet and permanently attach it to a hotbed. So i ordered this simply because of the brand name, I assumed that at the very least it would fit the machine AND it looked thin enough I could probably just clip it to the top of the glass bed to use it. Also, no mention of stick on magnet! Soo I ordered it and another one that did come with a sticky magnet that I planned to throw away, haha. Anyway, as soon as I opened it I was unsure. It wasn't like the bendy plates on my Enders or my Anycubics. But, I'm desperate for a solution here. I threw it on top of the glass, bent the clippy things to hold it (kinda lol), ran the auto level, checked the z offset and hit print. I'm not gonna lie, I was blown away how well it worked with no effort on my part at all. Ran the whole print, pushed on the part as it finished and it didn't fall off. I finished my dinner and came back after everything cooled, the part lifted right off of the plate, no effort. I ran the part a second time and tried to push it off while it was running, it was stuck pretty good. I let it finish again and tried to remove it while it was still warm. It took a little effort, but not excessive. Keep in mind with the clippy things holding it, it was visibly not flat, at all haha. Of course this was my fault for the way I had it assembled, but it didn't stop it from working. So, I opened the other plate i had ordered and checked if the magnet was the same size and sure enough, they matched perfect. I had a quick internal dialogue about how "I would never" and then I peeled that paper off and stuck that magnet directly to the machine. Next I ran the auto level again, loaded a new g-code and sent it on its way again. Again, perfect adhesion. Once this thing was flat against that magnet it is even better!! Changed my whole philosophy and I'll never look back! I highly recommend this one and if you can find it with the sticky magnet included, buy that one! I'm actually curious to try the other plate I bought now (the one that donated it's magnet lol).
...
show more
Reviewed in the United States on March 22, 2024 by Mike
Style: Glacier(P1P/P1S/X1C/X1E/A1)
Excellent so far. PLA holds real nice using bl supertack defaults. I have a supertack and it must be defective because all I had were adhesion failures with it right from the start. No issues with this. I printed the card shuffler on MW and zero issues with any of the prints. I love the smooth/flat surface it makes. You can just see the lines in it but overall it’s really nice looking and def a good alternative to textured PEI. With PETG I did have some corner lift on a large flat piece that was near the aux fan I have an aux fan diffuser but should have turned down the fan speed and probably bumped up the bed temp. I’ve done a dozen prints and still haven’t cleaned the plate. Adhesion is still great. I also like the color, really brightens up the camera feed.
...
show more
Reviewed in the United States on December 7, 2025 by D. Hotaling
Style: Glacier(Prusa MK4/MK3/MK3S)
I'm quite happy now, with the plate. But you need to know a couple things. 1. I really like the mattie texture. The pic is of something I made months ago, so ignore the scuff's. But you need to account for it during calibration. I would use calipers on the plate calibrarion swatch and tried to hit my normal .2mm and the nozzle nearly scraped the bed. You probably want to go with .25 or .3 to account for the texture. 2. Out of the box, there was a super thin coat of some kind of shellac on it that prevented proper adheasion. But it slowly flaked off in tiny pieces during the first 5 or 6 prints. Afterwards adhesion seriously improved. Now, I clean the plate more out of habit than to insure adheasion. 3. See plate photo, the grip tab might get in the way of your screen view but most printers let you push the platform back. All the same, If this would annoy you, be forewarned. It's only a problem during printing if you're using the back of the plate. Otherwise, it's a great idea as it never really gets hot. So you can grab it regardless of bed temp.
...
show more
Reviewed in the United States on November 13, 2025 by Richard Richard
Style: Glacier(P1P/P1S/X1C/X1E/A1)
I have every build plate Bambu makes for the X1C. The gold Bambu texture grips great and easy removal when cool. However, I very really want a texture that rough on the bottom surfaces of my prints. Also, I do not care for the shiny look it leaves. The Bambu cool plate super tack is also very good, but almost no texture at all which means you see the slight gaps between filament lines. This CryoGrip Pro Glacier is the best of both worlds. Just enough texture to hide the lines on the first layer, yet not so rough it looks odd compared to the other sides of the print. In fact, you would be hard pressed to tell the bottom layer from any other side of the print. I cannot say enough good about the built plate. I have recommended it to may friends who now also use this as their primary build plate. I have done hundreds of prints and still looks brand new. No glue ever. And in fact, I have never once washed it! It is crazy how good this thing is.
...
show more
Reviewed in the United States on October 28, 2025 by D. Doll