AudioControl LC-5.1300 High-Power 3/5-Channel 1300W Class D Car Audio Amplifier with AccuBASS, High Fidelity, Line-Level RCA & Speaker Level Inputs, High/Low/Band Pass Crossovers, Subsonic Filter
Buy Now, Pay Later
- – Up to 36-month term if approved
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Features
- Multi-Channel Flexibility: Configurable as a 5-channel or 3-channel amplifier for use with a variety of car sound systems.
- Class D, High Current Design: Provides unprecedented output up to 1300W RMS (4 x 200W + 1 x 500W @ 2 ohms, 4 x 100W + 1 x 300W @ 4 ohms, 400W @ 4 ohms bridged).
- Perfect for OEM Integration and Aftermarket Builds: Features 6 balanced RCA line-level preamp inputs for use with aftermarket radios and 8 summable speaker-level inputs for use with factory head units and premium amplified factory sound systems.
- AccuBASS Restoration: Corrects bass roll-off caused by processing built-in to your factory head unit.
- Built-In Diagnostic Codes: Provide exact insight should the amplifier detect a problem.
- GTO Signal Sensing: Gracefully turns on your amplifier when an incoming audio signal is detected, and then turns off after a period of time when the audio signal fades away to silence.
- MILC Clip Detection with LED Indicator: Prevents clipping and potentially damaging distortion.
- 3-Way Linkwitz-Riley Crossovers: Independent high-pass, low-pass, and band-pass crossovers at 12 dB/octave (adjustable from 30 Hz 5000 Hz) and subsonic filter ensure only the correct frequencies reach your car audio speakers.
- Optional Remote Level Control Input: Connect the AudioControl ACR-1 dash remote (sold separately) to control the volume level of specific output channels from the drivers seat (configurable during installation).
- Solid One-Piece Aluminum Chassis: Provides improved cooling, stability, and integration with a sleek aesthetic (8" L x 12" W x 2.1" H). This 1300W multi-channel amp also includes four 30A fuses and speaker connectors.
Description
A full-system amp with power galore Two keys to unlocking great sound in a car stereo system are serious power and extensive control - and this amp's got them both. For power, AudioControl's LC-5.1300 five-channel amplifier puts out 100 watts RMS to four channels and up to 500 watts RMS to a sub. If you're into mega-power, competition-type systems, you could bridge this amp to 3-channel mode and drive a couple of high-performance components with 400 watts RMS each while powering a sub with 500 watts RMS - that's 1300 watts in total. Active controls for active systems This amp will work well with a 3-way system that uses a pair of tweeters, midrange speakers, and a subwoofer. Highly adjustable crossover networks let you set high-pass, low-pass, and bandpass filters so each driver gets only the frequencies it was designed to play. AudioControl's AccuBASS circuit ensures maximum bass performance, even if you're connected to a factory radio that normally turns down the lower frequencies as you turn the volume up Add kick to your factory stereo AudioControl designed the LC-5.1300 to work equally well with aftermarket and factory stereos. Eight active speaker-level inputs allow you to connect to almost any factory radio, with signal summing accommodating the separate bass, midrange, and treble signals found in some factory systems. Signal sensing circuitry turns the amp on, via the front speaker-level inputs, so you won't need to run a remote turn-on wire throughout your vehicle. Convenient features Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional wired remote can get assigned to each and every channel pair so you can control volume from the front seat. Important Note: Some factory radios and amplifiers will not work without sensing that its speakers are connected to their outputs.
Item dimensions L x W x H: 12 x 8 x 2.1 inches
Voltage: 14.4 Volts
Manufacturer: AudioControl
Maximum Supply Voltage: 14.4 Volts
Mounting Type: Surface Mount
Voltage: 14.4 Volts
Maximum Supply Voltage: 14.4 Volts
Mounting Type: Surface Mount
Number of Channels: 5
Output Power: 1300 Watts
Package Type Name: box
Maximum Output Power: 4 x 200W + 1 x 500W @ 2 ohms, 4 x 100W + 1 x 300W @ 4 ohms, 400W @ 4 ohms bridged
Item Dimensions: 12 x 8 x 2.1 inches
Material Type: Aluminum
Specification Met: Oem
Manufacturer: AudioControl
Model: LC-5.1300
Brand Name: AudioControl
UPC: 851523007805
Part Number: LC-5.1300
Item Weight: 7 Pounds
Included Components: 5-Channel 1300W Amplifier, Speaker Connectors, Fuses, User Manual
Unit Count: 1.0 Count
Frequently asked questions
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
