ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), 10KG Texture Grey
Condition: New
Buy Now, Pay Later
As low as
$20.00
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Saturday, Jul 18
Color: 10*1kg Pla Texture Grey
Features
- Boosting Efficiency with Intelligent ldentificationAnycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
- Accuracy & Consistency Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
- Neat Spool & Premium Quality The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
- Clog-Free & Bubble-Free Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
- For Most 3D PrintersThe Anycubic Filament offers great compatibility with a wide range of temperatures and printing speeds, making it suitable for mainstream printers available on the market.
Description
ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), 10KG Gray
Brand: ANYCUBIC
Material: Polylactic Acid
Color: 10*1kg Pla Texture Grey
Item Weight: 10 Kilograms
Item Diameter: 1.75 Millimeters
Brand Name: ANYCUBIC
Additional Features: Intelligent identification chips, Low shrinkage and stable printing dimensions, Clog-free and bubble-free design, Wide range of compatibility
Global Trade Identification Number: 72
Manufacturer Part Number: AHPLGY-106-10-0327-US
Unit Count: 352.7396 Ounce
Manufacturer: ANYCUBIC
Number of Items: 10
Material Type: Polylactic Acid
Color: 10*1kg Pla Texture Grey
Item Weight: 10 Kilograms
Item Diameter: 1.75 Millimeters
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Saturday, Jul 18
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: 1kg Pla Green
Consistent filament diameter matters more than people realize until they run into stringing or layer inconsistencies from a bad spool, and this Anycubic PLA holds its +/- 0.02mm tolerance reliably throughout the roll. That consistency translates directly into smoother extrusion and fewer print failures, especially on detailed models where small variations show up clearly. The green color is vibrant and consistent from the start of the spool to the end, with no fading or tone shifts partway through. It prints well across a range of standard PLA temperature settings without much fine-tuning needed, and adhesion to the bed has been solid without warping on larger prints. The reusable spool is a nice touch for anyone trying to cut down on plastic waste between filament changes, and at 1kg it's a practical size for regular use without being unwieldy to store. For anyone printing regularly and wanting filament that just works without constant troubleshooting, this Anycubic PLA is a reliable choice that delivers consistent results.
...
show more
Reviewed in the United States on June 20, 2026 by Cory
Color: 1kg Pla Texture Grey
This filament has worked great for my 3D printing workflow. I use filament like this for shop projects and prototype tooling, including embossing stamp tests for leatherwork. It printed cleanly for me, held detail well, and has been reliable enough that I would buy it again. For the price point, I have been happy with the results. Good option for general printing and prototype work, especially if you need something affordable that still gives solid print quality.
...
show more
Reviewed in the United States on May 16, 2026 by Curtis
Color: 1kg Pla Texture Grey
My husband relies on 3D printing for his work prototypes, so I stocked up on the ANYCUBIC PLA 3D Printer Filament—1.75mm with Dimensional Accuracy—for his projects, and the precision has led to consistent, high-quality results after several spools. Product Details: This PLA filament is engineered for 1.75mm printers, boasting tight dimensional accuracy of +/- 0.02mm to ensure even extrusion and reduce clogs. It's vacuum-sealed with desiccants for freshness, and the standard 1kg spool unwinds smoothly without tangles, making it user-friendly for extended prints. Performance and Printing: He praises the flow—prints come out with clean layers, vibrant colors, and little to no stringing or warping when bed temperatures are set right (around 60°C). The material is forgiving for beginners but reliable for detailed work, producing strong, matte-finish parts that hold up to handling. We've used it for functional prototypes without failures. Ease of Use and Value: Loads easily into his printer, and the accuracy minimizes calibration tweaks, saving time. The PLA is eco-friendlier than ABS, with low odor during printing, and the spool size offers good value for hobbyists or pros. Pros: Precise +/- 0.02mm accuracy for jam-free, detailed prints. Smooth extrusion with minimal defects like stringing. Vacuum packaging keeps filament dry and ready. Affordable PLA for consistent quality. Cons: Can be brittle if over-extruded; requires proper settings. Limited color options in basic packs. Final Thoughts: This ANYCUBIC PLA filament is a dependable choice for my husband's 3D printing needs, delivering accurate and smooth performance that boosts productivity. I'd recommend it to anyone seeking reliable filament for professional or home use.
...
show more
Reviewed in the United States on October 6, 2025 by Daniella
Color: 1kg Pla Texture Grey
My go-to for 3d printer filament. I have never had any issues with any cubic, and their quality is always consistently good. As with any other pla, avoid sunlight or risk your prints becoming brittle. The spool was wound nicely with no tangles, and my hot end pushed it out without any challenges. Used this on an ender 3 and a bambu a1 mini.
...
show more
Reviewed in the United States on June 15, 2026 by Steven Stanton
Color: 1kg Pla White
I own two AnyCubic resin printers and have enjoyed working with these printers immensely, so when given the opportunity to purchase AnyCubic Filament that was on sale to use in my Bambu FDM printer I did not hesitate to make the purchase. Based on my past experience with AnyCubic’s printers and resin I was anticipating a flawless experience, however that was not the case. I purchased the PLA White filament and to its credit the filament had a nice finish for PlA when it was printed however getting it to actually print was extremely frustrating. I am not sure if this particular problem was an isolated issue or if any spool from this particular manufacture would provide this amount of frustration as I experienced in this case. During one print the printer was forced to stop printing on numerous occasions and indicated that the filament could not be fed through the extruder. Each time it was found that the filament was being pinched between itself and the side of the cardboard spool causing the printer to stop since tension was detected pulling the filament. As such I was forced to constantly ensure the filament was no longer pinched on the inside of the spool before printing could resume. I have used many brands of filament with my printer and have not experienced any issues with any other brand used in past. Hopefully this is an isolated incident but I am hesitant to purchase this brand filament again due to the constant problem I had with this spool. Update: AnyCubic’s customer service was very responsive when I experienced problems. I was offered the opportunity to receive a refund on the spool that provided me problems and caused failures with my print or order another spool with a refund to ascertain for myself that the problem I experienced was an isolated issue. I opted to provide AnyCubic another chance since I have had so much positive success with their other products. Upon receiving an additional filament spool of the same previous color I used it to print the same files I attempted earlier. I am pleased to say that the new spool worked perfectly and did not have the same binding issues as the previous spool I used. The printer was able to feed the filament flawlessly and the prints came out beautiful. I can only assume that the previous problems I encountered were an isolated issue and AnyCubic, after receiving the lot number for the previous product, advised they would provide this information to their quality control team. Thank you AnyCubic for your quick response and attention to this matter.
...
show more
Reviewed in the United States on December 2, 2024 by George G.
Color: 1kg Pla Texture Grey
Great quality, has no issues when melting and creating. Makes printing items very easy. The price is worth it. Has a nice contrast when used with other colors. Spool size is about 2.2 lbs, feeding into the machine when changing colors is super simple and clean. Very difficult to tangle.
Reviewed in the United States on May 4, 2026 by Kathy Iglehart
Color: 1kg Pla Texture Grey
I've been printing for years, and this is absolutely the worst filament I've ever used. Before it totally clogs the nozzle, it starts coming out like cotton candy. Flow starts out good but gradually decreases during the print. The first print failed at the end of the second day of a three day print. I changed some settings as well as the tension on my direct drive extruder. I swapped out my hardened steel nozzle for a brass nozzle. I also changed my perimeters so the print would only take two days. Once again, everything started out fine, but when I checked the following morning, the extruder was floating around in mid-air with another big ball of cotton candy stuck to it. There's also a problem with bed adhesion. Prior to these two failed prints, I had four failed starts. The filament immediately started lifting off the print bed in the first attempt. I cleaned the glass bed and tried again, only for another fail. So I grabbed the hairspray, which didn't help at all, so I cranked up the bed temperature 10 degrees and along with the hairspray, that solved the adhesion problem. This stuff definitely isn't worth the trouble. UPDATE: So they sent me another roll of the exact same junk and I got the exact same results. Read every negative feedback and you'll see a recurring theme. UPDATE to the UPDATE: So it turns out that I had a direct drive extruder motor going bad. After purchasing a new printer, I decided to give this filament another try. It prints PERFECTLY on the new printer! My apologies to Anycubic for the bad review.
...
show more
Reviewed in the United States on March 5, 2024 Reviewed in the United States on March 5, 2024 by VinceR
Color: 10*1kg Pla White
I've bought 3 10-spool white PLA filaments for large projects. The 20 spools I bought were fine, but I bought another 10 spools, this time, when the spool ran out, there was a massive strip of tape and my Bambu lab AMS pro tried to pull in the spool, but it couldn't due to the giant piece of tape on the end of the filament, don't know why there's giant strips of tape at the end of the spool the last 20 spools had a tiny strip of tap and the end of the filament barily touching the filament so it can easily detach from the spool and tape. Don't know what changed or if it's a mistake, but as of now, my other spools (8 now) that I'm using have the same tape problem, so now I have to snip off the end of the filament of each spool to make sure the printer doesn't try to pull the spool. Besides that problem, it's a great filament, no problem with the while color, great reusable spools.
...
show more
Reviewed in the United States on May 15, 2026 by Shane