2 Stroke 18HP Hangkai Outboard Motor Boat Engine Gas-Powered Water Cooling System Long Shaft Outboard Motor Tiller Control Outboard Boat Motors 246CC Heavy Duty Fishing Boat Kayak Engine

Features

• High Quality MaterialHigh quality aluminium alloy material, high hardness, corrosion-resistant, rust-resistant, not easy to bend, can be used for a long time: with strong aluminium alloy material and powerful engine, the outboard has a maximum load capacity of 2,204 pounds to meet different needs. (The heavier the load, the slower the speed.)
• Strong Power2-stroke 18hp engine (4500-5500rpm) provides strong power, allowing you to drive fast and save a lot of time and energy: stepless variable speed and constant speed cruise function allow you to easily adjust the driving speed, even and stable sailing, bringing you a more comfortable using experience. Three-blade propeller: Three-blade propeller, streamlined design, more powerful.
• Excellent DurabilityLow fuel consumption, high efficiency two-stroke motor, large capacity fuel tank (6.34 gallons), providing you with long range to meet the needs of short/long distance travelling: Good heat dissipation: Multiple cooling holes and water-cooling system, good heat dissipation, preventing the engine from burning out after long time use. Anti-swirl plate: Anti-swirl plate can effectively reduce the turbulence of waves and avoid water from wetting your clothes.
• Easy OperationManual start function, just pull the start rope and turn on the speed switch on the handle, it can be easily operated. Long non-slip handle (20 inches long) is easy to grip. The red stop button allows you to stop the engine in seconds by pressing: Forward, Neutral and Reverse gears, 360 degree steering function gives you the flexibility to control the direction of the boat.
• Quieter WorkingThe sound dampening cover provides a quieter working environment by absorbing the noise generated by the fan with internal sound-absorbing material. The outboard is suitable for small boats made of different materials (less than 4.9 feet in width and 19.7 inches in length), such as inflatable boats, iron boats, plastic boats, fibreglass boats, wooden boats and so on. It is widely used in fishery, aquaculture, outdoor adventure and so on.
• Gear Oil Filling MethodThere is a screw on the gearbox, unscrew the screw to add gear oil. Each machine will be filled with gear oil before leaving the factory, so it does not need to be refilled when it is used for the first time. After that, add according to personal use, and check every ten hours.
• NoteThe two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.After the running-in period, the volume ratio of gasoline and oil is 50:1.Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank.
• ReminderThe outboard motor must be started in water, do not start the engine on shore.Loosen the vent screw on the fuel tank cover counterclockwise when starting. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt.The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator.
• NoteOur machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.

Description

DescriptionWith a huge thrust, a sturdy and powerful propeller, and precise speed control, the outboard engine is a good helper for your water work. Its two-stroke motor, flexible steering, easy operation let you sneak up on fish, outdoor adventure, etc. with the best speed and low noise.SpecificationMaterial: Aluminum AlloyColor: BlackModel: 18HP Horsepower Long AxisDisplacement: 246CCGear Ratio: 2.08 (27:13)Number of Cylinders: 2Speed: 4500-5500RPMGear: F-N-RRefueling Method: 92 Unleaded Gasoline is RecommendedOil Tank Capacity: 24L/6.34galLoad-bearing Capacity: 500-1000kg/1102-2204lbsIgnition System: CDICooling System: Water CoolingControl System: Tiller ControlStart System: Manual StartPropeller Specification: 23.5cm/9.25in (Length) 20.3cm/8in (Diameter)Suitable Stern Plate Height: 45cm-55cm/17.721.7inCylinder Diameter Stroke: 56mm/2.2in50mm/2inRecommended Engine Oil: 2 Stroke Engine OilMixing Ratio: Fuel: Oil = 50:1Trim and Tilt System: Manual TiltNet Weight: 28kg/61.7lbsGross Weight: 30kg/66.1lbsPackage Size: 1337138.5cm/52.42815.2inProduct Size: 87.333.2117cm/34.413.146.06inPackage Included1x Outboard Motor1x Flameout Rope1x Oil Pipe1x Sealing Ring1x Paper Pad1x Spark Plug1x Start Rope1x Water Pump Impeller1x Cotter Pin1x Fuel Tank1x English ManualOther Tools

Brand: Cbhfmljd

Color: 2 Stroke 18HP Long Shaft

Material: Aluminum, Plastic

Engine Displacement: 246 Cubic Centimeters

Engine Type: 2 Stroke

Brand: ‎Cbhfmljd

Color: ‎2 Stroke 18HP Long Shaft

Material: ‎Aluminum, Plastic

Engine Displacement: ‎246 Cubic Centimeters

Engine Type: ‎2 Stroke

Operation Mode: ‎Manual

Recommended Uses For Product: ‎For Fishing Boats

Mounting Type: ‎Engine Mount

Fuel Type: ‎Gasoline

Maximum Horsepower: ‎18 Horsepower

Fuel Capacity: ‎24 Liters

Manufacturer: ‎Cbhfmljd

Model: ‎2 Stroke 18HP 246CC

Item model number: ‎2 Stroke 18HP

Exterior: ‎Machined

Manufacturer Part Number: ‎1

Date First Available: July 11, 2023