Dent Puller Remover Kit, Professional Car Paintless Dent Removal Kit Tools, 2 in 1 T-Bar,Adjustable Dent Lifter, Bridge Puller Slide Hammer Hail Dent Suction Puller for Auto Body SUV Damage DIY Repair

About Us! ZEUSFIRE will always stay within its core values of selling quality products to help people's lives transform a bit better! We will continue to strive to make ZEUSFIRE your first choice for the best products. We have backup warehouses in five countries. The automated production allows us to replenish inventory in each warehouse continuously. We have 15 top R&D designers, Committed to the research and development of automobile maintenance products --1* 2 In 1 T-bar Puller(long and short type) --1* Double Pole Bridge Dent Puller and 8* accessory --1* Gold Dent Lifter --1* 4.72inch Dent Puller+2* 2.36inch Dent Puller --1* Metal Tap Down Pen(with 9 heads) --1* Dent Puller Tools Bag --1* Hot Melt Glue Gun(100W)+10* Pro Hot Melt Glue Sticks The 2 in 1 T bar is made of aluminum, for big dents, you can use the puller lines to assist, for small ones, you can use the small blue glue tabs to repair. In addition, it can be broken into a small T-bar. Meet the different needs. There are 54 pcs tabs, with 7 different sizes. Suitable for various size dents, according to the size of the dent be chosen. Come with a 100W hot melt glue gun and 10 hot melt glue sticks. There is no need to purchase another part, enough for most dent can meet. The distance between the two ends can be adjusted according to the size of the dent to eliminate it better and faster. Suitable for small and medium dents. 1. Make the T shape and the rod firmly connected. 2. Then install the T-shape and the long rod. 3. And then grip the hammer spring through the rod. 4. Rotate and twist the T-bar mouthpiece and the long rod. Tip: Combine the T bar and the buckle link into a small dent puller. How to Use the Bridge Dent Puller? 1. Insert the glue stick into the 100W glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun. 2. Choose a tab and apply hot melt glue on it. There are 8 black tabs for the bridge dent puller, and you can choose it according to the dent size. 3. Put the tab on the dent, hold on and wait for a minute until the hot melt glue is a clod. 4. Use the bridge dent puller to align, then tighten the screw slowly with proper power until the surface of the dent is flatted or sightly bulged. The process should proceed carefully and slowly. 5. Spray 75% rubbing alcohol all over the residual glue, wait for 1-3 minutes. Peel it off or remove it with a plastic shove. How to Use the Gold Dent Lifter? 1. Insert the glue stick into the 100W glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun. 2. Choose an appropriate tab and apply hot melt glue to it. 50 tabs can be used. 3. Put the tab on the dent, hold on and wait for a minute until the hot melt glue is a clod. 4. use a dent lifter and adjust its height to repair dents. 1. Clean up the dent and make sure the car's paint is undamaged. 2. Insert the glue stick into the 100W glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun. 3. Choose a tab and apply hot melt glue on it. 4. Put the tab on the dent, hold on and wait for a minute until the hot melt glue is a clod. 5. Use a T-bar dent puller to pull up the dent. Repeat the above steps until the dent pop up. 6. Spray 75% rubbing alcohol all over the residual glue. Wait for 1-3 minutes. 7. Peal it off or remove it with a plastic shovel.