YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Large LED Digital Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Plasma Cutting Machine CUT-55DS PRO
Condition: New
Buy Now, Pay Later
As low as
$41.66
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Friday, Jun 12
Recently Viewed
Style: CUT-55DS PRO
Features
- NON-HIGH FREQUENCY: The ''blow-back'' start system offers a remarkably smooth and interference-free initiation of the engine. This method is inherently safe for operators and bystanders, posing minimal risk to human health. Furthermore, it operates harmoniously with surrounding electrical machinery, preventing potential disruptions.
- WIDE APPLICATIONS: Excellently suited for intricate metalwork, pre-weld preparation, automotive repair tasks and DIY art projects. Its adaptability makes it a cornerstone for professionals seeking reliable performance across challenging applications.
- POWERFUL CUTTING CAPACITY: Featuring a substantial 55A high current for maximum power, it delivers deeper cutting thickness. Ideal Clean Cut: 5/16"@110V 25/64"@220V, Maximum Cut: 5/8"@110V 4/5"@220V. Powered by international leading MCU intelligent digital control technology, it ensures deep, precise, and clean results every time.
- DIGITAL DISPLAY: The latest digital display centrally shows parameters such as air pressure, voltage, current, etc., allowing users to view the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. There will be an error code system on the screen if there is a problem with the machine.
- NON-TOUCH PILOT ARC: The IPT40 torch has great cutting performance, which efficiently cuts through rough, painted, and rusty surfaces. Non-touch pilot arc technology allows you to cut without touching the tips to the metal, offering better cutting quality and longer consumable life.
- PT/2T/4T FUNCTION: Post flow time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T, a semi-automatic cutting control for accurate cutting, 4T, an automatic cutting control for long-term continuous cutting.
- SAFETY PRIORITIZED: Our product features comprehensive safeguards, including IP21 water rating protection, robust protections against over-load and over-heating, ensuring unparalleled user safety and device longevity.
Manufacturer: YESWELDER
Part Number: CUT-55DS Pro NEW1
Item Weight: 19.41 pounds
Package Dimensions: 16.5 x 14 x 11.5 inches
Style: CUT-55DS PRO
Material: Copper, aluminum, electronic components, insulating materials, iron, plastic
Power Source: ac
Voltage: 110 Volts, 220 Volts
Wattage: 5.6 KW
Included Components: PC10-02 air connector, adapter, air compressor filter & gas hose, ground clamp, machine & IPT40 plasma cutter torch
Batteries Included?: No
Batteries Required?: No
Date First Available: February 28, 2024
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, Jun 12
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: CUT-55DS PRO
This is my first plasma machine. To make sure this shows up in the right section, this is for the 55 PRO DS. Specifically chosen because of the non HF start. This is something that is important if you ever plan on hooking this up to a cnc table (The HF start can cause problems). I don't have a cnc table yet, so this review is just regular use. I have 240 and 120v available. I tested this on 1/4" thick steel diamond plate, using 35 psi of air, and 120v, with the amps maxed out at 35. I've welded probably a thousand feet of wire, but I've never used a plasma machine before, so this was quite literally my first try. Pulled the trigger and proceeded at a faster speed than I would use if I were welding. In my case, that was too fast, so I came back and moved at the same speed I would use for mig welding a 1/4" plate. That worked perfectly for me. Very little blow out on the back, and a remarkably thin kerf. I feed this with a 60 gallon dual-cylinder cast iron compressor, so I have more than enough air. I haven't tried it on my smaller 30 gallon 240v single cylinder unit. I would have to guess this uses about the same amount of air as a blow gun. So if your compressor can keep up with a blow gun, then I think you should be good. If not, then you might have to time it so you know how long you can cut before you wait for the compressor to keep up. The good news is that you don't need high pressure at all. The air does need to be dry, but it does have a dryer in the kit, so if you don't have a dryer elsewhere, you should be okay. For me, I have a filter right at the pressure regulator right next to the compressor, so it's technically dried and regulated twice. This is a tiny plasma cutter, but I think most of the newer ones are small and light like this one. The value is through the roof as something like this even at the local discount tool store would be closer to a grand than not. It feels like a good quality tool - I have yeswelder other items and they are faring pretty well with use. Only time will tell of course and I will update this review if I run into any problems with it.
...
show more
Reviewed in the United States on October 22, 2025 by Trusty Dusty Tries New Things
Style: CUT-55DS PRO
I love my plasma cutter. Being a retired mechanic, I needed a plasma cutter to use working on my projects at home. The yeswelder plasma cutter is great for the projects I have encountered. Cutting bearing races like butter.
Reviewed in the United States on May 10, 2026 by D. Powell
Style: CUT-55DS PRO
Mine worked great. The torch did malfunction after heavy use. I talked with the company, and I was sent a brand new replacement. I have had Yeswelder brands, and they perform as a high-end welder does. I have, and owned both. I will not hesitate to purchase anything from Yeswelder.
Reviewed in the United States on April 7, 2026 by steven peterman
Style: CUT-55DS PRO
worked great with the original tip, bought some replacements that didn't work well at all, were supposed to be for it but were a little different, finally found some like the one that came in it on ebay, couldn't find them on amazon, but pleased with the cutter.
Reviewed in the United States on July 7, 2025 by T. Kinnison
Style: CUT-55DS PRO
Easy to use. If this is your first plasma cutter. Start at lower settings and increase for smooth cuts. I ran mine wide open at first. Unknowingly.
Reviewed in the United States on February 13, 2026 by Bob Coles
Style: CUT-55DS PRO
I have a 220 plug in my garage and it works great for fabrication demo! Cuts great and am able to scarf close to the surface. Really impressed for how cheap it is. I probably have 6 hours of run time on it to date and it’s paid itself off 10x over. Way more convenient than oxy fuel. Yes it’ll easily burn through 1/2” of steel.
...
show more
Reviewed in the United States on November 14, 2025 Reviewed in the United States on November 14, 2025 by Dave
Style: CUT-55DS PRO
I rarely leave a 'totally disgusted' review. Very few products are that bad. Yeswelder Cut55DS Pro is the exception. Total junk! I bought my first one in July and it didn't work at all. I contacted Yeswelder customer service and they wanted me to send them a video of it not working. I sent it back to Amazon for a refund. I ordered a replacement of the same model and thought the odds might be on my side. It was a bad bet. The second machine also didn't work at all. Please note, I checked all the connections several times. I read and re-read the manual several times. I reviewed the equipment to see if there was any physical damage. Nothing I did solved whatever is defective in these machines. Yeswelder sure has a lot of promotional videos showing how great these machines are and I wish my machine worked like theirs. I will not recommend this product to anyone. Try your luck with another brand.
...
show more
Reviewed in the United States on August 9, 2025 by Tony Bowler
Style: CUT-55DS PRO
I use this a bunch. No issues at all. Really like it
Reviewed in the United States on May 9, 2026 by kleve shellhorn