Yak-Power 2-Piece Super Bright LED Button Light Kit - Red

Features

• PLUG AND PLAY WIRING: Why cut and splice when you can just plug and play? Yak-Power has completely revolutionized LED lighting for kayaks with our patent-pending through-hull 12-volt connectors and plug-and-play wiring
• NO LEAKS: Adding LED lights to your kayak has never been easier! Simply drill a hole, screw in the self-tapping button light, plug them in and power them up. No wires to cut or splice, no caulking, and most importantly, no leaks.
• EASY INTEGRATION: Our LED Button Lights have Super Bright LEDs that are fully encapsulated into a 5/8" socket head housing with a 12ft. jacketed cable and waterproof connector. It's complete with plug-and-play SAE connectors for easy integration into any Yak-Power system
• NOTE: Always make sure the Yak-Power plug-and-play connectors are completely pushed together when connecting the system. We use our own custom tooled, high tolerance, very snug fitting SAE connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection.

Description

Power Panel Switching System is 12-volt plug-and-play connectivity for your kayak. As adventure-loving, live for the water kind of people, we created the Yak-Power system so you spend less time cutting and splicing and more time on the water. Grab whatever electronics you want and easily connect them to our plug-and-play system. You can connect your fish finder, bait well, LED lighting, phone charger and any other 12-volt accessory you need. It comes with an integrated Power Port outlet, which makes it easy to plug in and power your 12-volt accessories. Master power switch. Add and control 12-volt electronics with five switched outlets, connect your fish finder, bait well, LED lighting, and phone charger. Using our patent pending Through Hull 12v connectors and Yak-Power plug-and-play wiring, adding LED lights to your kayak is super easy. Plug-and-play SAE connector for direct connection to the POWER PANEL switching system, Battery Box, or Battery Terminal Pigtails. Yak-Power has completely revolutionized LED lighting for kayaks with our patent-pending through hull 12-volt connectors and plug-and-play wiring. Adding LED lights to your kayak has never been easier! Simply drill a hole, screw in the self-tapping button light, plug them in and power them up. No wires to cut or splice, no caulking, and most importantly, no leaks. Our LED Button Lights have Super Bright LEDs that are fully encapsulated into a 5/8” socket head housing with a 12ft. jacketed cable and waterproof connector. It’s complete with plug-and-play SAE connectors for easy integration into any Yak-Power system. Simply drill a hole using the included 9mm drill bit, screw in the Button Light housing and tighten using a 5/8" socket or wrench, plug in the lights, and power them up! No wires to cut, no splicing, no caulking, and most importantly no LEAKS! Each LED Button Light kit includes a 9mm drill bit, 2 Button Lights with 12ft fully insulated wires pre-terminated with a plug-and-play connector and a y-splitter that plugs directly into the Power Panel switcher for complete control. No cutting or splicing. Just plug them in and start fishing! Note: Make sure the plug-and-play connectors are completely pushed together when connecting the system together. Yak-Power uses our own custom tooled, high tolerance, very snug fitting connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection. Using other aftermarket connectors or splicing other connectors into the YP system may cause damage to the system or the accessories connected to the system Always make sure the polarity of the main power wire to the relay pack is correctly plugged into its mating battery power wire. The positive male (red wire) side of the relay pack connector should plug into the female (red wire) side of the battery connector and the female (black wire) side of the relay pack connector should plug into the male (black wire) side of the battery connector. This will insure that the relay pack is properly wired to power so that it can communicate with the keypad. If power is not properly connected to the relay pack or if the polarity of the battery connector is wrong, the relay pack will not be powered up and will not be able to communicate with the keypad. This will result in the keypad not fully turning on and the keypad numbers not illuminating. If you are having issues with your wireless switcher turning on, please check the polarity of the main power connector to the relay pack to insure that the battery connector into which you are plugging has the female side on the positive (red) wire and the male side pin connector on the negative (black) wire. Also, please make certain that BOTH clear battery insulator tabs have been removed from the keypad battery compartment on applicable models (YP-RP5WR, YP-RP5W-OR)

Item dimensions L x W x H: 9 x 3.5 x 2 inches

Brand: Yak-Power

Color: Red

Vehicle Service Type: Watercraft

Voltage: 12 volts

Light Source Type: LED

Auto Part Position: Unknown

Included Components: Light kit, wiring, connectors, mounting hardware

Fit Type: Universal Fit

Special Feature: Waterproof

Compatible with Vehicle Type: Watercraft

Voltage: 12 volts

Light Source Type: LED

Auto Part Position: Unknown

Fit Type: Universal Fit

Additional Features: Waterproof

Water Resistance Level: Water Resistant

Item Dimensions: 9 x 3.5 x 2 inches

Item Weight: 0.21 kg

Number of Pieces: 2

Color: Red

Material Type: Copper

Brand Name: Yak-Power

Included Components: Light kit, wiring, connectors, mounting hardware

Set Name: Yak-Power 2-Piece Super Bright LED Button Light Kit

Manufacturer: Yak-Power

Model Number: YP-LEDK-BLR2

Manufacturer Part Number: YP-LEDK-BLR2

Manufacturer Warranty Description: 1 year manufacture