Water Transfer Pump Portable, Gasoline Water Pump, 1 "Inch 38CC 4-Stroke 8500r/min Gasoline Water Delivery High-Pressure Pump, Strong Pull Kickback Starting System Lawn Watering Equipment

Features

• Large delivery head: the maximum head of 98.42 feet and the maximum suction of 22.96 feet of the water delivery pump are sufficient to meet your needs. It can irrigate farmland, fish pond and orchard for a long distance, saving the time and cost of manual transportation.
• High-quality material: The small water pump is made of high-quality aluminum alloy and cast iron, which has excellent compression resistance and is not easy to rust and corrosion, so it can be beautiful and practical for a long time.
• High working efficiency: 38CC four-stroke motor with power of 1.2kw and rotating speed of 8500rpm for gas pump. 8000L/hour The maximum flow rate of h allows you to pump and dump the work clothes faster and easier.
• Large capacity: Low fuel consumption, stable performance, long service life and low failure rate ,Small size, light weight, convenient transition and simple operation.
• Good Heat Dissipation Effect: The Garden water pump is equipped with multiple uniform heat dissipation holes, which can reduce the temperature in time during operation, reduce potential safety hazards, and extend the service life of the product.

Description

WP 10-140F portable four-stroke gasoline engine water pump pump is suitable for garden lawn watering, field pumping, drainage operations, clothing crops, green seedlings, irrigation and fertilization, etc. Product parameters:Engine model: 140F-3Engine type: single-cylinder, air-cooled, four-stroke gasoline engine.Engine displacement: 38ccMaximum power and speed: 1.2kw, 8500r/minFuel tank volume: 650mlEngine oil tank volume: 80mlMaximum suction range: 7mMaximum lift: 30mSuitable water pipe size:Water pump inlet: 1” (25mm)Pump outlet: 1” (25mm)Flow rate: 8000L/hourGross/net weight: 10kg/8.2kgPacking size: 38x35x30cm/14.9611.8113.78inProduct size: 362832cm/14.1711.0212.60inStart mode: pull start packing list:1x water transfer pumpHose clamps and accessoriesEnglish user manual Use and maintenance:1. First use: Choose genuine four-stroke gasoline engine oil and add it to the engine oil tank, about 80ml. Replace it every 100 working hours in the future.2. Fill the fuel tank and engine oil tank with gasoline and engine oil respectively. Turn on the oil circuit switch,3. Open the water filling cover above the water pump. Fill up the water diversion, use the card link to connect the water inlet pipe (note that all connections of the water inlet pipe cannot leak. Air leakage will cause the water to be unable to absorb).4. Close the damper and pull the starter. After starting, open the throttle and increase the throttle to start working.(If there are signs of starting but failed to start, please open the damper and continue to pull the starter)Note: After each work, run at idle speed for 2-3 minutes, and turn off the engi

Manufacturer: ‎LUPENGSHOP

Size: ‎1inch

Material: ‎Aluminum

Date First Available: August 24, 2023