VEVOR Dividing Head, K11-100mm 3-Jaw Chuck, CNC Router Milling Machine Rotational Axis 4th Axis A Axis Indexing Head, 2.6"/65 mm Center Height MT2 Tailstock 6:1 Gear Ratio, Universal for Engraving
Condition: New
Buy Now, Pay Later
As low as
$29.35
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
Extended holiday returns
Returnable until Jan 31, 2026 Learn more
Returnable until Jan 31, 2026 Learn more
This item's return window has been extended for the holiday season: Returnable until Jan 31, 2026
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Wednesday, Dec 24
Recently Viewed
Style: K11-100mm
Features
- CNC Rotational Axis 4th Axis: Transform your CNC machine with the capability to carve from various angles and positions, effortlessly processing complex parts with curves or angular features. Featuring a K11-100mm 3-jaw chuck, this dividing head for milling machine boasts an inner through-hole diameter of 0.9"/22 mm and a center height of 2.6"/65 mm, enabling you to tackle intricate designs with ease and precision.
- Precision at its Best: With a 6:1 reduction ratio, our indexing dividing head lowers the motor's rotation speed, providing a broader range of indexing angles for your machining tasks. It assists in precisely positioning workpieces to achieve the desired angles, ultimately enhancing machining accuracy. Additionally, the reduction in speed ensures smoother motor operation, reducing machine vibrations and noise for a quieter and more refined workspace.
- Stepper Motor Excellence: Equipped with the Nema23 2-phase stepper motor, it measures a compact 2.2x2.2x2.2 inches (57x57x56 mm) and features four leads. This motor delivers precise positional control with a robust internal structure, ensuring high reliability and durability even during extended operation. Trust in its performance for the long haul.
- Rock-Solid Construction: The indexing head milling's exterior is crafted from robust 6061 aluminum alloy, treated with an anodized surface finish for exceptional wear and corrosion resistance, which ensures the protection of internal components from the harshest environmental conditions, providing longevity and reliability you can count on.
- 3-Jaw Chuck Mastery: Our K11-100MM 3-jaw chuck uniformly secures various types of workpieces with formidable clamping force. It comes complete with 3 internal and 3 external jaws, accommodating a maximum clamping diameter of 0.08 to 1.18'' (2 to 30mm) for internal jaws and 1.18 to 3.15'' (30 to 80mm) for external jaws. Changing jaws is a breeze, ensuring that your workpiece maintains precise positioning and orientation throughout the machining process.
Description
Specifications Item Model Number: BS4-KP100-57 Center Height: 2.6"/65 mm Voltage: DC 3.75V, 2.5A Chuck Type: K11-100mm 3 Jaw Chuck Gear Ratio: 6:1 Chuck Clamping Diameter: 0.08-1.18''/2-30 mm(Internal Jaw), 1.18-3.15''/30-80 mm(External Jaw) Net Weight: 17.6 lbs /8 kg Package Content 1 x Dividing Head(With Chuck) 1 x Tailstock 1 x MT2 Rotate the Thimble 3 x Card Plate Anti- Claw 1 x T-wrench 1 x Numerical Control Cable 1 x User Manual
Manufacturer: VEVOR
Part Number: Dividing Head 3-Jaw Chuck
Item Weight: 17.53 pounds
Product Dimensions: 8.27 x 6.5 x 4.53 inches
Item model number: BS4-KP100-57
Style: K11-100mm
Power Source: ac
Item Package Quantity: 1
Included Components: 1 x Dividing Head(With Chuck), 1 x MT2 Rotate the Thimble, 1 x T-wrench, 1 x Tailstock, 3 x Card Plate Anti-Claw
Batteries Required?: No
Date First Available: February 20, 2024
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Wednesday, Dec 24
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: Dividing Head
I recently purchased a Vevor BS 0 Dividing head and I would like to do a review. Quick take -A good buy for about $220 ( with tax). The main body is well made, but the additional work that would make this a $500+ unit are left to the buyer but are easily done. Out of the Box - all parts were present, although one of them should have been scrapped. A carrier had been double drilled and broke out the side. My options with Amazon were to return the unit entirely or contact the manufacturer. I contacted Vevor and received a request for a picture of the damaged part within 24 hours. I sent them a picture and I received an immediate answer that they would send me a replacement. EDIT: The part arrived and is in good shape All of the parts needed deburring, A total of about 30 minutes to knock off sharp edges. All of the machining looked good. The tail stock is fine, the dead center was clearly heat treated, but not polished afterward. Some of the bolts are a bit rough - again a touch with a file. The dividing head is impressive in weight, very solid. The index marks are very clear. I tore it down because various YouTube videos said there might be debris inside. There was some, and it was worth doing. I've greased and lubed it. I deburred and stoned the dovetails and it is much smoother. I got the chuck off, it is quite tight, but finally unscrewed ( check You tube videos). I felt that the thrust bearings were too tight, making it very difficult to rotate the spindle. I adjusted them to my satisfaction and checked the runout. Using the provided dead center it was about .0025, but when I used one of mine it was about .0005, quite nice. The three jaw chuck had about .003 runout which I think is ok for a 3 jaw. When I put on the direct index plate, I rotated it so that the 0 mark was on top, and reset the index mark. The indirect plates seem to be fine, but the right and left index arms would slip badly, a very bad thing for a dividing head! I used a file on the back of the arms to remove the residue of sprues left after manufacture. I then sanded the back till it was flat, also filed/sanded the round portion of the arms, until they were flat. They now are quite secure. Hope this helps anyone trying to make a decision.
...
show more
Reviewed in the United States on March 11, 2025 by mike c
Style: Dividing Head
Sometimes you have to make a purchase for a project you’ve been putting off. After some research I went with this. Works as it should. Now I wish I purchased sooner. Just note it will need some cleaning and adjustments.
Reviewed in the United States on June 29, 2025 by lpk
Style: Dividing Head
I've spent two days cleaning, deburring and adjusting this thing. Depending on how valuable your time is, or if you actually have to make money with this, it may not be for you. I'm retired and equipping a hobby machine shop, so making this into a useful tool is interesting and educational for me. The quality of machining is generally good, but QC is virtually nonexistent. I completely tore it down and cleaned out all the factory grease, which left me with a pan full of grinding grit (but very few metal shavings). I'm stoning surfaces and deburring and chamfering sharp edges as I reassemble the head, and oiling and greasing where appropriate. Some of the screws are very poor quality, so I will be replacing them. The engraving on the fixed indexing plate is off by a full degree at 180, but at least the holes appear to be reasonably accurate. The ball on the end of the worm shaft was so soft it had already developed a flat spot, so I'll be replacing it with a hardened bearing ball. I added a washer to the eccentric clamping screw, making it quite a bit easier to adjust the worm. The included chuck was a Sandu (reject?). The logo was partially ground off, and it had a runout of 0.009" with a 1/2" rod chucked in it. It was also full of grinding grit and operates much more smoothly when cleaned and re-greased. My excellent 1946 Logan lathe has a 1-1/2 x 8 spindle nose, so I installed the chuck and re-ground the jaws, but the best runout I could get was still 0.003". Not exactly horrible for a cheap 3-jaw, but not great either. P.S. The "spring" that tensions the sectors against the indexing plate is a joke. I bought some bowed side-mount external retaining rings (98398A155) from McMaster-Carr and deepened the groove on the worm shaft to 0.675" (about 0.02"). With it snapped in the sectors are properly tensioned against the plate and feel like they should. I also replaced the cheap screws holding the indexing plates with some good black oxide flathead allen screws (also from McMaster). I had to chase the badly tapered threads in the spindle nose cap too, to get it to even thread on. Like the title says, it's a kit, but the only thing that couldn't be fixed was the distorted degree markings etched on the front plate that are out a full degree at 180.
...
show more
Reviewed in the United States on April 10, 2023 by Briney Eye
Style: Dividing Head
This is a very nice dividing head for the money. Pretty well finished and smooth operating, very little lash in the gearing. If you were thinking to use an ER32 chuck in the headstock taper note that the taper is #2 Morse not #7B&S as stated in the specifications. That is really good news given that the ER32 chuck adapter for #2 Morse is much cheaper than the #7 B&S. They are also available with 10mm drawbar threads so you can eliminate the chance of slipping in the taper. I checked the run-out specifications and found the following: Radial run-out of the spindle nose spec 0.0006" Actual <0.0002" Radial run-out of spindle taper nose spec 0.0008" Actual was about 0.001" Radial run-out of spindle taper hole 4" distant 0.0014" Actual was 0.0025" Radial run-out of test bar with 3-jaw chuck 0.0031" Actual was 0.003" So the specs were pretty close and my measurements might not be perfect. The run-out with the 3-jaw chuck was due the the chuck back-plate (spindle nose locating diameter had <0.0002 TIR). The locating diameter for the chuck had a run-out of 0.0025". That could be corrected by taking a few thousandths off the locating diameter, center the chuck and use the mounting screws to lock it in.
...
show more
Reviewed in the United States on February 11, 2020 by Timothy B. Rhyne Timothy B. Rhyne