V350 Cold Hot Roll Laminator,350mm Laminating Machine,Single & Double Sided Thermal Laminator for Paper Card PVC Foil,Etc.,Digital Display & Temperature Control for Home Commercial Office School,700W

Features

• High Efficiency & Durability: The V350 cold hot roll laminator is constructed with carbon steel and aluminium alloy, providing a sturdy structure that is resistant to wear and deformation, ensuring a longer service life. Laminator operates at 110V, 60Hz, equipped with a 700W high-power motor delivering robust performance. It operates smoothly at both high and low speeds without stuttering. (Note: Laminating films are not included.)
• Multi-Functional Laminating: The V350 laminating machine supports cold laminating, single-sided hot laminating and double-sided hot laminating. Single-sided laminating effectively prevents curling, while double-sided laminating is smooth and bubble-free. The rubber roller is internally heated for fast heating and even heat distribution, with a working efficiency of up to 43.3 in/min.
• Highly Adjustable: Both film tension and rubber roller pressure can be adjusted on the laminating machine. You can adjust these settings according to the thickness of the laminating object to avoid skewing, curling, and wrinkling of the image. The maximum width of the film for the laminating machine is 350 mm (13.7 in). The thickness of the material to be laminated is within 0.8 mm (0.031 inches); the material must not exceed this thickness.
• Intelligent Temperature Control: The 350mm laminating machine is equipped with an intelligent control panel and real-time temperature display screen, with a precision of 3C and automatic temperature control protection. It also has a one-time memory function, which automatically retains the previous temperature settings after restarting, allowing it to be used immediately after powering on.When hot laminating, set the temperature to 100-120C to laminate thinner paper and common materials.
• Quiet Technology & Safety Protection: This V350 350mm hot cold roll laminator adopts quiet technology, producing extremely low noise during operation. It is equipped with multiple safety protection mechanisms. When abnormal heating elements, sensor failures, or excessive temperatures are detected, the system will automatically cut off the power supply, enter a protective state, sound an alarm, and display the fault category to ensure personnel safety and equipment life.
• Wide Application & After-Sales Service: The V350 laminator supports hot lamination of materials such as paper, PVC, and cardboard, making it an ideal choice for schools, offices, and homes for processing documents, business cards, and brochures. We provide customers with a 12-month warranty service. If you have any questions, please feel free to contact us, and we will be happy to assist you within 24 hours.

Description

We put our heart into every product. PeiXWming products cover multiple application scenarios. We consistently prioritize "professional adaptability" as the core principle, breaking category boundaries so users with diverse needs can find reliable products that fit perfectly. We don't focus on a single category, instead, we concentrate on the "practical value" of every product, ensuring you can choose with confidence and use with peace of mind in any situation. Since PeiXWming founding, we've remained focused on delivering reliable solutions for every need. We continuously innovate to provide every customer with a great shopping experience. We always polish our products with professional standards, adhering to the quadruple quality control standards of strict material selection, performance testing, detail polishing, and factory sampling, ensuring that every product can withstand the test of practical scenarios. After-sales service Reply within 24 hours We sell not just products, but lasting peace of mind. Voltage Compatibility of the Laminator: This laminator has a standard US plug and is designed for 110V power; it is not suitable for 220V power. Note: If you have any operational questions about the product after receiving it, please reach out immediately. We will resolve them for you right away. Due to lower ambient temperatures in winter, cold air and chilled paper rapidly dissipate heat from the heating roller surface, accelerating heat loss. This may cause the actual surface temperature to fall below the display reading, affecting lamination adhesion. To address this, internal temperature compensation settings can be adjusted. The core logic is: By fine-tuning internal parameters, the machine outputs higher actual heat when displaying lower temperatures. This compensates for heat loss by increasing the heating roll's actual operating temperature, bringing it as close as possible to the display‘s setpoint. This setting is exclusively for winter use. When spring temperatures rise, the parameters must be restored to factory defaults following the same procedure. Failure to do so may cause equipment overheating. Note: If the laminator operates normally during winter, no parameter adjustments are required. For detailed operational steps, please reference the homepage video: V350 Laminator Winter Temperature Calibration Guide Why does the V350 laminator display high temperatures but produce poor laminating results during winter use? This is not a machine malfunction, but rather caused by excessive heat dissipation during winter: cold air and paper rapidly draw heat away from the heating roller’s surface, preventing the actual temperature from reaching the required bonding level. If the laminator fails to adhere properly during winter, can I simply set the display temperature higher? We strongly advise against arbitrarily increasing the display temperature. This setting is linked to the machine’s core temperature control and overheat protection systems. Blindly raising it may trigger safety mechanisms and cause malfunctions. Safety Solution for Insufficient Laminating Temperature in Winter Watch the homepage video to fine-tune the internal temperature of the laminator. Increase the heat output from the adhesive roller to compensate for heat loss during winter, ensuring the actual operating temperature matches the display temperature. When is internal temperature adjustment required? Adjust only during winter when rapid heat dissipation causes poor lamination adhesion. When spring temperatures rise, follow the same steps to restore the settings to factory defaults. No adjustment is needed if the machine laminates normally. Regarding internal temperature settings, please keep the following critical warnings in mind: This setting applies only to winter laminating non-stick conditions. Follow the principle of fine-tuning adjustments. Carefully review the video operating guide before proceeding.

Brand: PeiXWming

Color: White

Product Dimensions: 20.87"L x 8.27"W x 8.66"H

Laminating Width Maximum: 35 centimeters

Item Weight: 15 pounds

Brand Name: PeiXWming

Unit Count: 1 Count

Manufacturer: PeiXWming

UPC: 768924463478

Warranty Description: 1 Year

Warm Up Time Description: 3 minutes

Number of Rollers: 1

Item Dimensions L x W x H: 20.87"L x 8.27"W x 8.66"H

Item Weight: 15 pounds

Color: White