Search  for anything...
POWERTEC

POWERTEC Table Saw Dust Collector Bag for 10" Tablesaws, Miter Saw, Fits Nominal 2.5" Dust Port, Expands to 2.687", Hook and Loop, Zipper, Spring Clasp for Easy Attachment Table Saw Accessories(75074)

  • Based on 1,175 reviews
Condition: New
Checking for the best price...
$10.99 Why this price?
Save $8.99 was $19.98

Buy Now, Pay Later

As low as $2 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, Sep 23
Order within 10 hours and 37 minutes
Available payment plans shown during checkout

Recently Viewed

Style: Table Saw Dust Bag


Size: for 2.5" Dust Port


Features

  • INCLUDES: (1) Table Saw Dust Bag for Bosch 4000 and similar 10 Table Saws
  • PURPOSE: TS1004 table saw replacement dust bag helps keep work area cleaner by collecting up to 70% of dust, trimmings and particles
  • FEATURES: Table saw dust collector bag has a velcro closure for a tight seal around the clamp area of the opening, and a zipper at the bottom for efficient dust disposal
  • EASY TO USE: Dust bag is quickly and easily attached, detached and emptied
  • SPECIFICATIONS: Can be used with other table saws with nominal 2.5 dust ports, or expands to 2.687 and diagonal saw
  • Compataible with DEWALT DWE7485, DWE7491RS, DW7451, Skil TS6307-00, Rockwell RK7323, Delta 36-6023

Description

Introducing the TS1004 Replacement Table Saw Dust Bag by POWERTEC.This replacement dust bag is designed to fit the Bosch 4000 table saw, but can also be used with other table saws with a 2.5-inch dust port. The POWERTEC dust bag reduces dust exposure, improves visibility, and collects up to 70% of dust, trimmings, and particles, helping to keep your work area clean and safe.The table saw dust bag features a velcro closure for a tight seal around the clamp area of the opening, and a zipper at the bottom for efficient dust disposal. The bag is also made of durable materials that can withstand even the toughest messes.The POWERTEC TS1004 Replacement Table Saw Dust Bag is easy to use and attach to your Bosch table saw. Simply remove the old dust bag and attach the new one. The velcro closure ensures a tight seal, and the zipper at the bottom makes it easy to empty the bag when it's full.POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry

Manufacturer: ‎POWERTEC


Part Number: ‎75074


Item Weight: ‎4.2 ounces


Product Dimensions: ‎15.75 x 6.7 x 2.7 inches


Country of Origin: ‎Taiwan


Item model number: ‎75074


Size: ‎for 2.5" Dust Port


Style: ‎Table Saw Dust Bag


Item Package Quantity: ‎1


Included Components: ‎INCLUDES (1) Table Saw Dust Bag for Bosch 4000 and similar 10” Table Saws


Batteries Required?: ‎No


Date First Available: October 13, 2023


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Sep 23

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Stang
Style: Miter Saw Stand Size: w/ 110V Power Outlets
Very sturdy stand. Well made. Holds my miter saw in place ..I really like the exstention bars that come with it an the wheels that make it easy to roll. Very satisfied.
Reviewed in the United States on February 18, 2024 by malcolm hornsby
    • Beefy unit. Stable platform. Great value.
Style: Miter Saw Stand Size: w/ 110V Power Outlets
Really happy with this stand. I'm using it for a Dewalt DW715 and it fits perfect. The stand is stable and is heavily built for its purpose. Setup took about 5 minutes as it is mostly assembled upon arrival. I see that there have been some shipping issues for other customers but mine arrived without a scratch on it. I chose this over a stand available at a popular discount tool retailer and I'm glad I did. This stand is beefier and more stable so it's definitely worth the extra few bucks. To me the fold-down wood racks on the legs looked like plastic in the picture but they are metal. I also wondered from looking at the pictures if the unit would stand on end but I can confirm what I think I saw in other reviews, the wheels are for moving the unit only. Even without a saw mounted on it, the unit is difficult to balance on its end, so if you are looking for something that you can drop the legs on and stand on end with the saw attached, this isn't for you. I agree with reviewers that the outlet placement is awkward. Unless your saw bed is two inches higher than mine, the center outlet will be covered by the work support arm. Easy enough to trim the arm down and I suppose a byproduct of building a universal stand, but still a bit awkward. Tip for people mounting 12 inch saws. Slide the saw forward on the brackets and mount the rear holes first.. If you mount the front first the back side of the brackets are partially blocked by plastic so the screws are difficult to place. Now I'm off to see if I can source a few pairs of the quick release mounting brackets. I'd love to have some mounted to some of my other bench top tools. ... show more
Reviewed in the United States on December 31, 2016 by scihawk
    • Nice sturdy stand.
Style: Miter Saw Stand Size: w/ 110V Power Outlets
It's not perfect but not bad. Took about 5 min to assemble. Very sturdy in use, just kick the legs out as far as they will go. When folding it up you need to fold the handle end first, But actually this works fine as you tip it up and past center, fold the handle end then fold up the wheel end. When sitting upright for storage it sits on the plastic screw handle that adjusts the roller, don't like that much as it will scratch it up and eventually break it. The wheel shaft is welded on, kind of wished it was a push through shaft that I could remove as I don't really need the wheels on it all the time. With the shaft sticking out you would want the wheels on so you don't impale yourself. Lower shelf brackets will come in handy I expect. I was planning on using this for my table saw too, but the rollers are too low and the saw would be way too high anyway. So I don't have a dual purpose use for it. That is fine as it will serve for my 12 inch slider. This is shorter than some which is why I picked it, space is at a premium. Well built, solid, reasonably light weight, good value for the money. Yes I would recommend it. Maybe they will change a couple things and it would be perfect. Edit: Now that I have used this stand a bit I am really liking it even more. I have a Dewalt DWS780 mounted and this stand does not move. Rollers are easy to adjust and sturdy. The lumber supports on the legs are very handy. I recently stacked 2x4s on them and it was very convenient. The power strip could come in handy for contractors. This stand is somewhat short in length which is what I wanted for my space. Contractors will possibly prefer a longer stand if they have the means to haul it. As it is I use a portable roller stand for end support on long boards. Edit #2: This stand is now a respected fixture in my small shop. The tool mounting brackets are perfect for holding a tape measure. They fit under the front of my miter saw and are always available, I keep on one on each side. The holes that are used to hold the legs when folded up are perfect for keeping a pencil handy, just use a large eraser (or use rubber bands) to keep it from falling through the hole. I find the power strip is perfect for plugging in palm sander, Router or hand planer. I plug the power strip into my vac switch so that any tool plugged in will activate the vacuum. This is very handy as my table saw/work table is close. So easy to connect a hose from to vacuum to the tool and use the power strip to run the vac as needed. While I could have just added a power strip to do this it works out it is in the perfect place for my shop. EDIT #3: There is one negative I can report, the mounts slope back i.e. they are not in alignment with the rollers. I shimmed my miter saw by 3/8 inch at the rear in order to get the deck in line with the out-feed rollers. As near as I can tell the mounts are not adjustable. ... show more
Reviewed in the United States on March 8, 2017 by Salli & Gene
    • Miter Saw Stand - Portable type 1 ea.
Style: Miter Saw Stand Size: w/ 110V Power Outlets
Pros: Overall construction is SOLID... Quality is there. Easy to assemble. For quality you get weight. I like this so the saw doesn't move around a lot while working. Besides - they put wheels on for a reason. Ok ... The outlet design is awesome, can use their cord or your cord and cord doesn't get in the way while moving. The clamp down for the DeWalt DWS779 works but the saw slid a little to the rear while mounting on table. I will fix this - absolutely without complaint. The material standoffs at the ends are nice - with / without roller is a good option. The knob for tightening it is a little robust and if the saw is stood on edge, ie. next to a wall - the knob will hit the ground. Changing that for a regular bolt. Last thing - when I get something like this, I always look to see what I would do if the table becomes broken while on the job... Thanks to the nut and bolt selections and overall construction, this stand will be around for a hot minute. So - the cons: Weight, but that't the trade off between strong and more importantly - stable, the knob for the material standoff, but that's just using a bolt vice the knob and not over torquing it, and the mount of the brackets to the saw, which I blame which I will fix by putting a sticky back rubber surface between the saw and the mount. In short - highly recommend this to anyone. Wow - was totally impressed with the guages of metal used. Quality good, design good, cost makes everything perfect. Thank you ... Not sure where it was made but here's the deal - it works... ... show more
Reviewed in the United States on September 15, 2019 by MAB
    • Amazing
Style: Table Saw Dust Bag Size: for 2.5" Dust Port
Big enough you’re not constantly swapping out. Amazing product. Catches great saves space
Reviewed in the United States on January 5, 2024 by Barndo_Built_NorCal

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...