NADAMOO White Tub and Tile Spray Paint, DIY Refinishing Aerosol, 2 Can

Update your bathtub with NADAMOO Tub & Tile Refinishing Kit without the hassle of removing your old tub. Your glazed bath tub or sink could get various stains and chips. Normally a household cannot frequently replace the bathtub, sink . If you want to give your shower tub, sink or tiles new life, you can depend on NADAMOO Tub & Tile Spray Paint. Spraying is faster and can give you a more even coat of paint. This durable solution hides flaws and applies smoothly to give your surfaces a semi-glossy sheen. The spray coating cures and becomes hard like a semi-gloss porcelain finish providing superior abrasion and scratch resistance. NADAMOO spray paint is here to reglaze porcelain surfaces so that you can make your bathroom and sink look like new without having to spend a lot of time and costs replacing tiles and bathtubs. Note： The product has a strong odor. Please wear a respirator with the windows and doors open and fans running. Coverage may vary depending on the thickness of the application and the number of coats you will spray. It also depends on the amount of overspray you generate. The use of this paint is not limited to porcelain. Additionally, it works well on various surfaces, including ceramics, fiberglass, hardwood, metal. Please do proper surface preparation before spraying. Sand it to rough up the surface so paint adheres well. NOTE: If you are painting over a dark surface or you want a thick finish, you’ll need additional 1-2 coats to achieve good coverage. Rough surfaces will absorb more paint than smooth surfaces. This means that you’ll need more paint to cover the same area. >> Peel off paint with sand or wire brush； >> Repair chips or cracks with patching compound ；>> Clean the surface with solution of bleach and water；>> Prepare surface with an abrasive pad and Lime-A-Way； >> Sand surface with sandpaper & rinse；>> Wipe surface clean with dry tack cloth. ____________________________________________ >> When you’re spraying paint, use a light touch. This will help prevent the paint from drips and runs. >> Keep the nozzle moving. Don’t hold the nozzle in one place for too long. Applied excessively thick will cause coat to puddle and to dry unevenly. You may thought the new finish is dry but actually the bulk of the paint film underneath remains soft and uncured with less exposure to the atmosphere. >> Use even strokes. When you’re spraying paint, use even strokes. This will help ensure that the paint is evenly applied to the surface. >> Overlap your strokes. When you’re spraying paint, overlap your strokes. This will help ensure that there are no bare spots on the surface. ____________________________________________ Tub & Tile Repair Kit Tub Spray Paint 1 can Tub & Tile Spray Paint Tub & Tile Spray Paint Tub&Tile Refinishing Kit White Grout Renew Pen Kit White Epoxy Grout