Monolith 24 Inch Speaker Stand (Each) - Supports 75 lbs, Adjustable Spikes, Compatible With Bose, Polk, Sony, Yamaha, Pioneer and others, Black
Condition: New
Buy Now, Pay Later
As low as
$15.00
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Wednesday, Jul 15
Recently Viewed
Size: 24 Inch
Style: Speaker Stand
Description
The Monolith Speaker Stand is an ideal pedestal for your home theater speakers in your entertainment system. Sturdy steel columns provide incredible strength and rigidity to support up to 75 lbs. The Monolith Speaker stand is the perfect way to display your speakers! It comes in singles, not pairs, so if you need 3, 5, or 7 you will not be stuck with a leftover stand. Sturdy Construction: Four steel support columns feature a scratch-resistant black powder coat finish. The result is a rigid platform outfitted with a satin finish that cleans easily and resists scratches and scuffs. Each stand is 24 inches tall and is acoustically inert. Four soft rubberized top pads are supplied to protect your speaker from scratches and to further isolate your speaker from unwanted acoustic vibrations. Rectangular Columns: All four support piers can be filled with sand or steel shot for the ultimate in vibration dampening. This will further reduce any unwanted vibrations or resonances that can color the sound and reduce fidelity. Adjustable Spikes: Each stand comes with adjustable spikes to pierce through your carpet and isolate the stand and your speaker from floor vibrations and resonances.
Brand: Monoprice
Material: Alloy Steel
Product Dimensions: 12"L x 10"W x 24"H
Color: Beige, Black
Finish Type: Powder Coated
Item Dimensions L x W x H: 12"L x 10"W x 24"H
Maximum Height: 24 Inches
Color: Beige, Black
Finish: Powder Coated
Enclosure Material: Alloy Steel
Load Capacity: 75 pound
Fit Type: Universal Fit
Brand: Monoprice
UPC: 889028059449
Global Trade Identification Number: 49
Mfr Part Number: 124794
Model Number: 124794
Manufacturer: Monolith
Built-In Media: Speaker Stands
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Wednesday, Jul 15
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 28 Inch
Style: Speaker Stand
I was wary of buying these speaker stands because the price was so cheap. However, I took the chance after reading a review on an audiophile website in which the reviewer used these stands with a $4,500 active speaker stereo system. I'm glad I did. My first priority was to get stands that were heavy and could be filled with shot or gravel to dampen out any vibrations that could affect the sound quality of my stereo system. The Monolith stands definitely checked that box. My second priority was that the stands be reasonably attractive (or at least not unattractive). It was difficult to determine this just from the photos on the website so I was pleasantly surprised when I assembled these and placed my KEF LS-50 speakers on them. Wow! The combination looked great! These stands have a non-nonsense, industrial appearance, which I like. They consist of four vertical square posts which does not convey the overly massive, brutish appearance that some single or double post stands do. My last priority was fit and finish. While these stands do not have precise quality that one would typically get from $500 German or Italian products, the mating surfaces were good enough to not show gaps. Also, the black matte finish was free of any unsightly irregularities. Maybe I was just lucky. Nonetheless, I am a happy camper! And I am not an easy person to satisfy. If you don't feel the need to splurge on a set of designer-style stands costing $500 (or more), these stands are a good alternative. They provide good support for speakers without interfering with the sound quality, look good and are very affordable. I highly recommend them. (Note the seller, Monoprice, offers other stands which do not appear to be as sturdy or as esthetically attractive as the Monoliths, so buyer beware).
...
show more
Reviewed in the United States on March 27, 2021 by DC-User
Size: 24 Inch
Style: Speaker Stand
These stands turned out to be a FANTASTIC buy and they are extremely sturdy, very easy to assemble, and I literally did not even have to use the instructions? Large silver bolts go on the bottom, and the small black go on top. I will say for the spikes, back off the tightening nut most of the way, screw the spike all the way in so that it stops at the bottom of the plate, then tighten the nut down. I did mine by hand, that way you know that when you stand them up, both should be perfectly level. I attached the 4 posts to the bottom plate and flipped it over and used a medium sized funnel and filled all four posts with a fine, low dust cat litter and tapped each post so all 8 were completely filled and then I attached the upper plate. This will make them not only more stable from possibly tipping over from being bumped into, but this will also dampen any resonances from the speakers and actually make them sound considerably better, as well as improve the bass! Honestly! Read about it on the net. Some use lead shot, etc. The cat litter is the cheapest way out, or you could use sand (kiln dried only!), which you can get at the local hardware or craft store. That's about it, simple stuff and a bargain best buy, especially for the quality and build!! Easiest stands I've ever had to assemble and I've had many. And yes, they could easily hold up to the posted weight of 75 lbs. One last note, for me, I'm considering drilling 2 holes in each top plate (one in front and one in back) so that I can securely, physically attach the speakers to the stands, so as to prevent them from being knocked off. You may want to consider this to protect your investment in your speakers as well as prevent them from being knocked off by young children or large pets! Enjoy!!
...
show more
Reviewed in the United States on July 23, 2021 Reviewed in the United States on July 23, 2021 by Radar
Size: 32 Inch
Style: Speaker Stand
A little difficult to assemble in terms of aligning parts if done by yourself, get a helper and very easy to put together. Not the most elegant stand, but very much worth the money, and they look great. Extremely sturdy by themselves, but I filled each pole with sand about half way, I have larger bookshelf speakers and wanted the sturdiness over carpet with the spikes. Result is the most sturdy and bottom heavy stand I have ever had. I used about 10 - 12 pounds of sand per stand, bought 3 stands, 2 x 32” and 1 x 28”... and a 60 lb bad of sand at hardware store for $4.00. The spikes are long, all threads were good, a couple a little finicky but all parts fit well. For the picky consumer, the square poles aren’t quite all perfectly square, you can’t tell unless you built it or inspect extremely close. Also, could be that I put them together with no help. Again, great buy for the money, I have spent $100’s more on stands that aren’t as sturdy, I’m very happy with my purchase thus far. If you are into a clean black finish, these are perfect. The finish on all parts was perfect as well, no nicks or scratches. Finish seams like a powder coating , feels very durable.
...
show more
Reviewed in the United States on November 21, 2020 by Scott K.
Size: 28 Inch
Style: Speaker Stand
This is a good product capable of supporting a fairly large/heavy “bookshelf” Type speaker. It has a couple of ideosyncracies that can be dealt with during assembly and one arguable acoustic flaw that the designers allowed for easy correction of. For ref, all hardware is M8. I knocked off 1 star because of the overcome-able fit issues described in the text below, but these can be made into 5-star stands albeit by spending a bit more to enhance their performance. I’ll take steel stands over wood or MDF any day and my non-audio crazed wife will back me up. Please be aware that these are sold as individual units and not as paired sets. You need to purchase one stand for each speaker you intend to mount. Packing: The parts are well packed in triple wide heavy duty corrugated material with corrugated separators and poly bags keeping everything firmly secured. One of my boxes had a fair amount of “road rash” but none of that penetrated to any parts. A single exploded assembly diagram is included, but provides no real instruction detail or written assembly sequence. It’s a fairly intuitive assembly via the provided diagram, but a little thought and prep is helpful as mentioned below. A lot of questions are also answered in the specs and various user reviews. They’re worth going through. Construction first. These are all steel so in the case of an unfilled finished stand, you’re looking at 20.9 lbs empty weight for a 28” tall stand with the only variable between stands being the length of the four 2”x2” square posts. The base is a heavier gauge steel making up approximately 3.8 lbs of the overall weight. It’s formed along each of the four edges and welded/sanded at each corner. This provides stiffness and depth for a pair of rails that have two M8 threaded holes each for the included spikes the stand will sit upon. Note that spike pads are NOT included so if you plan to use the spikes on non-carpeted surfaces, you’ll need buy some or ruin your solid floors. Alternatively, there are many choices out there if you wish to swap out for alternative feet and/or spikes. Note that the welding, while sanded down is not exactly craftsman quality and leaves the bottom of the side flanges a bit uneven, so you’ll need some sort of spike or foot (4/stand). This bottom plate has eight holes for the post attachment via two M8 screws per post. The top plate the speaker will sit on is a smaller single sheet with four embossed holes providing for the four flat head screws that secure it to the four steel posts (1 screw per post). Prep and assembly: It is highly recommended you fill the 4 posts of each stand with something to dampen the very obvious resonance of the tubes. If you don’t they’ll ring like wind chimes, especially with larger speakers. Even if you don’t think the ringing is a listening issue, you’ll be wasting the energy from your speakers and will be losing bass response and treble clarity narrowing the range of sound you do hear. Of course we tend not to miss what we don’t know about, but on a good system, solid, well damped stands is about the single most effective speaker “mod”:you can make per $ spent. The easiest and best material is silica play sand which is finer than beach sand or what you can dig up and can be purchased or ordered from any big box hardware store, typically in 50 lb bags. You’ll need at least 25 lbs for a 2/3 fill height of the 28” stands. The silica sand will set you back about $30, but you’ll be cursing the $6 bag of “natural” play sand when you try filling the posts. Before adding any fill, make sure the bottoms of the posts are sealed. I’ll describe an easy way to do that later. You can also use regular beach sand or other “natural” sand, but it needs to be kiln dried or dried in your oven as it will almost always have a high percentage of trapped moisture in it which is not good for steel stands. Silica play sand BTW is man made and is both more dense and has more uniform grain size for better dampening; it’s worth the extra cost because it can be used out of the bag and will flow through a funnel and into the steel posts much easier than natural sand. Please do NOT use kitty litter for a filler. A lot of folks do, but for a steel stand it creates some issues. 1) while it will dampen out some resonance, its density is a fraction of silica sand and will help little to prevent tipping over if the speaker is hit. 2) it can smell over time or so I’m told. 3) kitty litter will absorb moisture from the air and start your steel stands to rusting from the inside out if you live in a higher humidity environment. If you want more detail on fill heights and what it does to help the stands, you can use chatGPT to describe what you’re doing and get some additional help. If your speakers are over 20 lbs each, I suggest first filling with some steel shot to lower the center of gravity so the finished product will be less prone to tipping over from the efforts of cats, dogs and small children. Even a couple of pounds in each post will lower the center of gravity a good bit, making the stand less likely to tip. I used about 0.6lbs of 6.35mm (1/4”) ball bearing balls per post (2.4lbs per stand) and about 1.8 lbs of 2mm (0.078”) dia steel in each post (7.5 lbs per stand) and then topped it with silica sand until each post was about 65% full. 15lbs of 2mm shot, AKA #10 or S-780 will run about $50. Between that and silica sand, you’re looking at about $40 added to stand cost, or $80 for a pair, but you’ll have a “pro-level” stand weighing about 41 lbs each that will be dead silent and able to withstand most jumping cats and slight collisions from dogs and kids. Over time, vibration will cause the silica sand to settle a little and fill in the gaps around the steel shot further dampening the stands. This will eventual result in about a 64:36 ratio of steel to sand and further lower the stand center of gravity. Before assembly of anything, seal the inside edges at the bottom of each post. The welds and seams on mine were very good, but I used a bead of clear silicone window in each bottom to be sure. Keep the bags on the posts as you work to help avoid any paint damage. After the caulking cured, I loosely attached each post to the base. Laying and supporting the stand level on its side, I used carpenters squares to make sure the 4 posts were square to each other as I tightened the screws. This will help later on when the top plate is attached because the tapped screw hole at the tops of the four posts will NOT align with the holes in the top plate. This squaring step adds 10 minutes or so, but will help minimize that alignment issue somewhat. If filling the posts (especially with any sand product), before doing so, remove the protective bags and cut four of them into equal halves. Take one of the bag halves, flatten it some and then us in a yard stick at the center of the bag section, push it into a post. Use the yardstick to tamp it down at the bottom of the post. Repeat this for each post until all of them have a bag half tamped down at the bottom. I got this idea from a video review I saw and tried it. This is a further protection against anything leaking out and is perhaps the easiest way to do it. The other reviewer has never had a sand leak and so far, neither have I. It’s easy, clean and can’t hurt. In any case, you might want to attach your spikes or feet to the bottoms at this time. I used a flat bottomed metal foot with a steel ball inside supporting the upper part of the foot screwed into the M8 threaded holes on the bottom of the stand. They’re supposed to work like a spike and seem to. FWIW, I always avoid rubber and go for a spike (or steel ball) between the stand and the floor or spike pad. Spikes or spikes on small metal spike pads are the best option for vibe isolation and mechanical coupling to the floor. YMMV depending on your equipment. After all of the posts are filled keeping the upper 3rd of the posts empty, it’s time put the top plate on and finish the assembly. You may wish to add a rubber pad covering the four posts, or seal it at the top edges of each post with Silicone caulk to prevent sand escaping if knocked over, but that may be more trouble than it’s worth, I do almost guarantee you will see gaps between the top plate and the posts, but since these generally don’t go anywhere after placement I don’t personally worry over the small gaps that cannot be seen except on hands and knees. I could argue that it allows for evaporation of any otherwise trapped moisture, but I might just be rationalizing. Get your screws started one by one. It may take a good bit of force on any given post to get its tapped hole aligned with the hole in the top plate. Good lighting helps you get things aligned. My first set was a real bear, but the 2nd aligned much easier. Just luck of the draw. If your speakers are over 10-15 lbs, you should use BLUE-Tac to secure them to the tops of the stands. Don’t use silicone feet up there as it will undo some of the benefits of dampening the stands as the silicone will allow your speakers to shake a little. Under 10 lbs, and the silicone is relatively solid by comparison to speaker made and is fine. This is more of an issue over 25 lbs of speaker. Honestly you may never hear a difference on most systems, but I hate giving up any advantage I don’t have to. A pea sized ball of blue-tac at each corner of the top plate will do it in most cases. Go to 1/2” marble size over 25lbs. Some people recommend a thin felt pad at the rear edge of the top plate, if something sounds funny or buzzy, but my little vintage fuseliers are quite happy pressed down on the blue-tac and the sound is a very dramatic step up from the mdf stands I had before that my wife noticed immediately when she walked in later that day. Have fun - audio is a great hobby but make sure your significant other agrees as it can get pricey ;-)
...
show more
Reviewed in the United States on February 14, 2026 Reviewed in the United States on February 14, 2026 by T.G. Dubini
Size: 24 Inch
Style: Speaker Stand
Great stands. I did a lot of research for the best stands for my new Philharmonic BMR monitors and was seriously considering the SolidSteel units, which would have cost $800. These arrived well packed and are heavy duty. I found a Youtube video with advice on how to fill them with sand - I highly recommend doing that, they are now vibration free and rock solid. My beautiful speakers are 32 lbs each so I decided to make a custom top plate (out of poplar wood) to go on top of the supplied metal plate. The result is a rock-solid stand that looks amazing.
...
show more
Reviewed in the United States on November 17, 2025 Reviewed in the United States on November 17, 2025 by Scott in Vegas
Size: 24 Inch
Style: Speaker Stand
Don't even think about it. Buy these speaker stands. Outstanding quality. Easy to put together. Built like a tank (I know, that comment dates me, but hey, I'm from a time when things were built to last) and these will last forever.
Reviewed in the United States on February 12, 2026 by Mike W
Size: 24 Inch
Style: Speaker Stand
Nice simple solid stand
Reviewed in the United States on May 5, 2026 by Amazon Customer
Size: 28 Inch
Style: Speaker Stand
I ordered new SVS Ultra desktop speakers and wanted a pair of solid stands to hold them off my desk for better sound quality and room acoustics. After checking around, r/BudgetAudiophile had multiple recommendations for these stands and I understand why. Pros Very thick steel Stable Heavy Elegant Can even add filler inside the posts to make them heavier but I don't think this is necessary. Assemble in 5 minutes The 100lb limit seems conservative... Cons The shipping box is heavy with two. There is no speaker wire guide to hide the wire into the stand (can use Velcro) - I didn't bother. For wood floor I added round sliders so as not to scratch the floor. (if you have carpet, no need) Yeah, I would buy them again... might need to for adding an audio system in my family room.
...
show more
Reviewed in the United States on February 29, 2024 Reviewed in the United States on February 29, 2024 by Tony Bentivegna