Laptop Cooling Fan, Notebook Computer Water-Cooled Set PC Liquid Cooling Kit, Row Fan Mounting Accessories, Contains All Bits Needed for Easy Installation

Features

• 600L/H 5600RPM Water Cooling SystemsThe water row made of aluminum material, equipped with standard G1/4threaded interface, easy to install, the adopts ceramic bearings, graphite bushing, rate up to 600L/H. This is a laptop water cooling kit, the product is special, easy to install.
• Efficiency and Low NoiseThe laptop water cooling fan with fan design, the fan speed is 1200RPM, the heat dissipation efficiency is very high, the fan adopts sleeve bearings, and the noise is lower.Compared with the air-cooling heat dissipation, the cooling effect of the water-cooled package is more significant.
• Custom Liquid Cooling Stable PerformanceNotebook custom liquid cooling can give you much better cooling performance compared to all inone cooling systems and traditional air coolers as you can make specific tweaks to your system to have it perform better. Clear water cooling tubes make it easy to show off your favorite water-cooling fluid, creating a cooler water cooling effect and providing a better immersive gaming experience.
• Complete Computer Water Cooling SetThe water cooling kit contains all the bits you need to customise your water cooling set up and have it match the rest of your system.You dont need to buy other accessories yourself or consider compatibility issues, more practical.
• 100% Satisfaction GuaranteeProfessional manufacture, stable performance and high reliability.This laptop water cooling kit has a complete service,if you have any questions about the product or you are not satisfied, please us at any time, we will provide you with the best solution.Your satisfaction is our main concern.

Description

Size: Approx. 12 * 5.8 * 5.8 cm/ 4.7 * 2.3 * 2.3 in Material: PMMA + anode aluminum Intermediate transparent acrylic outer diameter: 50mm Hole position: G1/4 thread *6 Color: Red Equipped with adjustable plastic clips*1 Size: Approx. 275 * 120 * 32 mm/ 10.8 * 4.7 * 1.3 in Interface: G1/4 thread Material: aluminum Composition: single layer flat tube, flat tube 18 Size: Approx. 120 * 120 * 25 mm/ 4.7 * 4.7 * 1.0 in Net weight: about 130g, Fan speed: 1200 ± 10% RPM Maximum air volume: 50CFM Maximum static pressure: 1.703mm-H20 Noise: 23.5DB (A), Rated voltage: 12VDC Working voltage: 10.8-13.2VDC, Starting voltage: 7VDC Rated current: 0.25A Power input: 3W Bearing type: sleeve bearing This water flow meter allows you to visually see the operation of the water cooling and improve efficiency. The package contains three hard pipes, selected from high quality materials, for the connection of the various parts of the water cooling. The transparent design gives you a more intuitive visual experience of the operation of the water cooling at a glance. Rated voltage: 12V motherboard small 3-pin plug Input current: 0.8A ±10% Motor operating speed: 5600RPM ± 5% Head: 4M±0.5M\Flow rate: 600L/H±10% Startup voltage: 6V Size: Approx. 2.8 * 2.2 * 1.8 in (not include brackets and connectors) Wiring color definition: red positive / black negative / white speed Ceramic bearing, graphite bushing, very quiet, no water idling during use Bracket hole distance: starting from the center of the hole, width 51.50mm, length 31.50mm Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. 1. Lock the two fans with the M3*32 screws on the water line. 2. Use the M3*35 screw to lock the water row bracket on the water line. 3. The other side of the second step uses the M3*12 screw to fix the water row bracket and the water drain. 4. Lock the 90° bracket with an M4*14 screw + M4 nut on an I-bracket. 5. Lock the type I bracket of step 4 with the M4*10 screw + M4 nut under the water pump. 6. Lock the adjustable plastic buckle of the water tank with another M4*10 screw + M4 nut on the other type I bracket. 7. Lock the pump of step 5 and the adjustable plastic clip of step 6 with M3*12 screws on the water line. 8. Install the quick screw, pagoda, 90° elbow and plug on the water drain, water pump and water tank respectively. 9. Install the quick-turn nut and seal ring on the short straight hard pipe and connect the water pump and the water tank together. 10. Install one plug and two quick turns on the water flow meter. Quickly screw the nut and seal ring on the other two hard tubes and connect them with the water pump, water flow meter and water drain to complete the installation. Move forward and be a winner! The Bewinner brand offers a variety of 3C electronic products, such as computers, TVs, mobile phones, headphones, electronic albums, game consoles, speakers, network cards, chargers, etc. We also provide a variety of Camera Equipment, Industrial Equipment, Outdoor Gear, Children's Toys, Pet Supplies, Agricultural Machinery Accessories, etc. Since its inception in 2018, the Bewinner brand has been loved by the people of the US for its commitment to providing customers with quality products at affordable prices. We will continue to work hard to develop more quality products to make life convenient for people in the US. From product production to delivery, we strictly control each link, and each product is shipped after careful inspection. As a responsible company, we will do our best to create the perfect shopping experience for everyone.

Product Dimensions: 4.7"L x 2.3"W x 2.3"H

Brand: Bewinner

Power Connector Type: 4-Pin

Cooling Method: Water

Compatible Devices: Laptop

Noise Level: 30 Decibels

Material: Aluminum,Ceramic

Maximum Rotational Speed: 1200 RPM

Air Flow Capacity: 600 Liters Per Hour

UPC:

Power Connector Type: 4-Pin

Cooling Method: Water

Compatible Devices: Laptop

Noise Level: 30 Decibels

Maximum Rotational Speed: 1200 RPM

Air Flow Capacity: 600 Liters Per Hour

Item Dimensions L x W x H: 4.7"L x 2.3"W x 2.3"H

Material Type: Aluminum,Ceramic

Brand Name: Bewinner

UPC: 739879346598

Manufacturer: Bewinner

Number of Items: 24

Part Number: Bewinnergedvf9no5g

Item Weight: 2.39 Kilograms

Unit Count: 1.0 Count