JONSBO D32 PRO Micro-ATX PC Case,High Compatibility Mini Desktop Case,A/B Mode for MB, Support MATX Back-Connect/BTF MB,365mm GPU/240AIO/163mm Air Cooler,ATX/SFX PSU, USB3.2 PC Gaming case,Black
Condition: New
Buy Now, Pay Later
As low as
$12.16
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Mar 8
Recently Viewed
Style: D32PRO Black
Features
- JONSBO D32 PRO Micro ATX PC Case -Unmatched Price per Performance - 24L Volume offer A/B mode for MB( Standard MB and BTF MB), Achieve different compatibility optimization solutions,Easier to build your PC,More convenient.
- High Compatibility- Micro ATX case upgrade to support the main popular hardware , such as BTF motherboard, Max.Length 365mm GPU,ATX/SFX-LSFX PSU (16A plug except), 240AIO,163mm Height Air Cooler etc.
- Optimize visual design: Tempered side glass shows the Concise and neat working hardware.(Adjustable motherboard cable management cover to block visible complex wires)
- Optimized installation experience design: detachable PCI-E position unobstructed opening design, easy insertion of large graphics card
- Size:D396W207H314mm (Foot included)
- MB support:MINI-ITX/MICRO-ATX standard /MICRO-ATX (Back-connect, the case needs to be switched to B mode)
- Drive Bay: 2.5": up to 4, depends on other hardware configurations,3.5": up to 2 (shared with the 2 x 2.5" mounts), depends on other hardware configurations (depends on other hardware configurations)
- PSU Clearance:Max.L200mm (not compatible with 16A plugs)
- Radiator support:Top,up to 240mm CPU Air Cooler Clearance: In A mode,H170mm (Intel CPU) or 169mm (AMD CPU) In B mode,H164mm (Intel CPU) or 163mm (AMD CPU)
- FAN:Top: 2 x 120mm / 2 x 140mm Rear: 1 x 120mm Bottom: 3 x 120mm / 2 x 140mm Front IO Port:USB3.2 Gen1 Type-A*2/USB3.2 Gen 2 Type-C*1/AUDIO*1 MIC*1
Brand: Jonsbo
Motherboard Compatability: Mini ITX, Micro ATX
Case Type: Mini-Tower
Recommended Uses For Product: Gaming
Color: Black
Material: Metal
Power Supply Mounting Type: Bottom Mount
Cooling Method: Air
Model Name: D32
Item Weight: 5.44 Kilograms
Number of USB 3.0 Ports: 3
Brand: Jonsbo
Series: D32
Item Weight: 11.97 pounds
Product Dimensions: 15.6 x 8.15 x 12.4 inches
Item Dimensions LxWxH: 15.6 x 8.15 x 12.4 inches
Color: Black
Manufacturer: JONSBO
Date First Available: January 16, 2025
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Mar 8
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: D32STD Black
This case is phenomenal inside and out. It was very well protected in the box it came in and was easy to build in. The design is well laid out and compact, not obnoxiously bulky or spread out like typical towers. Despite its smaller size, it fit everything beautifully and the airflow is excellent throughout. The GPU I used is 270mm and it fit perfectly in the standard version. If you get anything longer, I’d recommend the pro edition even though the standard looks like it might fit longer cards. The quality you get for the money is worth it alone, it looks and feels solid in every aspect. If you’re looking for the perfect case for a micro ATX build, look no further than this.
...
show more
Reviewed in the United States on August 1, 2025 by Alex Alex
Style: D32PRO Black
Fantastic case. I looked it up online before purchasing. I knew my GPU is basically 3.5 slots thick (7900xtx red devil). Story time for those that enjoy that with their reviews. I had purchased an Asus X760E-F board long ago. At the time of purchase I had googled what memory was supported. A kit of TeamGroup DDR5 6000cl30 was on the list. It even listed support as supporting all 4 ram slots. So I had purchased that kit specifically to pair with the Asus. And then after a SINGLE BIOS update, Asus decided to completely remove memory support. Since then I swore to never use Asus again. Because why would you remove support for memory like that? MSI has NEVER in my history of using them, removed memory support.... So I had some extra money. New Build. Carrying over my 7800x3d, 7900xtx red devil, my Corsair RM1000X SHIFT power supply, and 2TB Samsung NVME. Also put in an old 1TB Crucial P5 nvme as well. New parts were this case (fantastic, ill get to it more in a bit), MSI B650M Project Zero motherboard, TeamGroup ECO ram DDR5 6000cl30, and an ---A-r-c-t-i-c-F-r-e-e-z-e-r-I-I-I-2-4-0-m-m---. Putting it together was rather simple. Surprisingly, even though my PSU is not on the recommended list for this case, I knew it would work simply because of the side connection design. And sure enough, it does. I can not only fit the PSU in the spot it belongs, but my GPU still fits under it. I did have to remove the bottom portion of the "hiding" bracket to ensure fitment, but you dont NEED the bottom part of the bracket. Its there for "beauty" memes. So I wont knock off a point on that. So the board in (had to install 1 extra standoff that wasn't installed initially) and PSU/GPU, RAM, and then Liquid cooler. Last was the rear fan which im using as an intake to help feed the CPU AIO mounted on top. And its working flawlessly. There was ONE screw on the case which was just way over tightened. And it stripped. Luckily I still got it off regardless. And the screw case has "extra" screws in it, so I simply replaced the bad screw with a replacement. So didn't knock a point off for that either. Though I would have preferred I didn't struggle at all... that isn't enough of a reason to dock a star considering quality is still really high for the price you pay.... I wanted to slap the glass panel on the back side where all the cables plug in and use the mesh for the front side to enhance airflow.... but my corsair cables are so stiff that I was barely able to get the mesh panel on. Doing the glass certainly would have shattered the glass, if not instantly then over some times. And I am not dealing with that mess.... The back connect space needs to be just a bit bigger. And yes, I did move the motherboard tray to the B position which is meant for back connect motherboards. For stiffer power supply cables, it needs more room. On that note, the only reason I kept MY PSU was because I already had one and didn't wanna buy another..... if you are building fresh out, get yourself a sick 1000w Thermaltake SFF/SFX PSU (or any high wattage mini psu) and use that instead. Because more than likely the cables will be much shorter and better suited for this case. Because my PSU is meant for full size cases, i have TONS of extra length tucked behind in the space available. Which also meant squishing the panel against said cables. So if you are building fresh, definitely go that route for ease of use. I don't mind struggles especially since I knew I would be doing it on purpose before I purchased the case! Cooling wise, I dont see any different temps compared to my previous case which was an XL case. Granted that case had more fans, it also had more space. Thus it required extra fans to help push more airflow through such a wide area. Noise wise its not bad either. There is a noise with my liquid cooler. I thought it was the fans because when I ramp them up manually i hear the sound get louder. So I replaced the arctic fans the liquid cooler comes with for noctua nf-a12x25 (the goat fan) but sadly the sound remains. And its completed tied to fan speed. I am not sure why, but so far im keeping the fans at 25% rpm and it doesn't bother me (not loud at 25%). And since im cooling a 7800x3d, I dont need that much fan speed anyway. Its AMD, they dont run hot.... I also happened to have tried the thermalright cpu mount/frame. So peace of mind there too. Which is nice. For a budget builder who wants a small form factor, this case is minted. I wanted the new thermaltake TF100 or whatever its called that released FEB42025 but sadly it wont fit my behemoth of a GPU. This jonsbo does!!!! 3.5 slot and long AF. And it fits, with room to spare. Meaning if I upgrade at any point to a newer GPU that has an even more insane cooler, I know it would fit. So this case will last a long time for me. Maybe down the road I will get a different liquid cooler, but for now its minted. UPDATED with picture. Sadly the Arctic Freezer III 240mm I had purchased was bad. Which means 1 star review for Arctic. Do a better job at Quality Assurance Arctic.... No reason why I should get a bad product that makes a horrible noise. And I tossed the packaging because I am not a hoarder, so I can't return it. Oh well. Wont buy Arctic ever again, right up there with never buying XFX.... On that note, updated picture shows my new MSI a13 cooler which honestly fits the case way better than the Arctic one did.....Sadly the aesthetic is ruined because I was using black fans but figured "eff it, if im gonna rebuilt it because of the AIO I will use all my left over Noctua NF-A12x25 fans which are monster performers" and then purchased two slim NF-A12x15 for the bottom which are mounted closest to the glass possible to help push air up towards the rear/aio/psu which are all exhausts. Temps are great BTW in case anyone is wondering. Stay cool and even with fans maxed out its really really quiet.
...
show more
Reviewed in the United States on February 9, 2025 by namco namco
Style: D32PRO Black
Very high quality material, every piece fit together flush, came apart easily, and went back together solid. I was glad that there are these great, fine mesh screens for all intake fans, as I was worried about dust with the open design and all the holes. I was also worried about the power supply, as my previous case was traditional. My standard size power supply fit snug and secure, and having it at the front of the case z so helps distribute the weight evenly which helps a lot when transporting. My CPU temps have been sightly lower than my previous case, hinting good airflow as I do not have an AIO or any liquid cooling. Exceeded my expectations for overall looks as well. Cable management area was designed perfectly, I would not change a thing about the design even if I could.
...
show more
Reviewed in the United States on June 4, 2025 by Placeholder
Style: D32PRO Black
Seriously the easiest micro ATX case I have ever seen. I have a Hyte y-60 which I love, but was looking to build a smaller pc for my kids to use on the tv. The size is perfect. It is smaller than most PC cases, but was a piece of cake to put together. I dare say that the cable trays and management were easier and more thought out than my regular ATX case. I haven't got my gpu in it yet, so I haven't got much to say about cooling, or functionality yet, but it was a seriously the best designed case I have ever seen!
...
show more
Reviewed in the United States on November 17, 2025 by Benjamin