JET 13-Inch Planer/Molder, 3 Knife Cutterhead, 1-1/2 HP, 115/230V 1Ph (Model JPM-13CS)

Features

• Four precision-ground column design feature adds stability when raising and lowering the table
• Infeed and outfeed rollers are adjustable and rubber coated to support your workpiece without marring the wood
• Exclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removal
• Molding cutter head accommodates more than 40 standard molding cutter sets
• Top-mounted height adjustment handle is easy to use for quick table height changes
• Two-speed gearbox has feed rates set for optimum planing and molding results

Description

We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three. Boasting a 1-1/2-horsepower motor, the Jet 708524 JPM-13CS planer/molder produces a superior finish with its three-cutter head design and can handle material up to 13 inches wide and up to 6 inches in height. A sturdy cast-iron table and base provide strength and reduce vibration during use, and built-in lockable casters add support and stability while allowing easy maneuverability. Designed and built with the home woodworking shop in mind (view larger). Power Base for Home WoodworkingDesigned and built with the home woodworking shop in mind, the Jet 708524 JPM-13CS has a totally enclosed 1-1/2-horsepower, 115-volt motor that can easily be rewired to 230 volts. The motor delivers its power to the cutterhead assembly through a pair of V-belts running in precision-machined multi-groove pulleys. A removable side door on the cabinet provides access to the motor and its belt-tensioning mount should adjustment become necessary in the future.Superior Cutting and FeedingThe JPM-13CS features an all-steel, precision-machined cutterhead (2-9/16-inch diameter) fitted with three full-width knives. The knives are retained by three-piece wedge-shaped gibs that allow for the installation of many molding- knife profiles without removing the planer blades. The center gib section makes installing most molding knives easy (2 inches wide and under).The planer/molder has two feed rates, with the high 20 FPM (feet per minute) setting used primarily for dimensioning wood when lots of material is being removed quickly. The 10 FPM speed is used for finish cuts when the smoothest possible surface is desired, and this slower feed rate is also used for molding operations.Rubber-covered infeed and outfeed rollers keep the stock moving at a consistent pace, and the rubber feed roller surface gets a good grip on the wood without marring the profiled surface of molded wood. Both of the feed rollers are easily adjustable to maintain their performance.Generously Sized, High-Quality TableThe cast-iron table lends plenty of heft and contact surface, measuring 19-1/4 inches long by 14 inches wide. The table has 6 inches of travel maintained by lead screws on either side and is driven by an easy-to-use hand crank on top of the machine. Handy metric and inch scales flank the infeed housing opening to make adjusting cut depth simple and accurate. It comes with an incorporated dust chute--so it's simple to hook up to a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to maneuver the tool in a tight shop. It's backed by a five-year limited warranty. What's in the BoxOne Jet 708524 JPM-13CS planer/molder, and operating and assembly instructions.SpecificationsMotor: 1-1/2 horsepower, 1 phase, 115/230 volt Maximum planing width: 13 inches Maximum planing thickness: 6-1/8 inches Maximum planing length: 14 inches Cutterhead: 4,500 rpm speed, 2-9/16-inch diameter Cuts per minute: 13,500 Feed rate: 20 feet per minute (FPM) planing; 10 FPM molding Dimensions: 24 inches by 25 inches by 41 inches Weight: 258 pounds Warranty: 5-year, limited P.when('A').execute(function(A) { A.on('a:expander:toggle_description:toggle:collapse', function(data) { window.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the Manufacturer This JET planer/molder features a sturdy cast-iron table, mounted on four precision-ground steel columns for reduced vibration and smooth feeding. It has fully adjustable rubber-coated infeed and outfeed rollers, with a 1-1/2-horsepower motor, which is fully enclosed, fan cooled, and is located at the base of the machine to protect it from wood chips and dust. The two matched V-belts deliver full power to the three-knife cutterhead, while the two-speed gearbox provides smooth molding and fast planing. The high- quality tool steel of the three steel knife sets will provide a superior finish. Adding to the ease of operation, all cutters under 2-inches in width may be installed without removing the planing knives. It has a 13-inch-wide and 6-1/8-inch-thick planing and molding capability. See more

Brand: Jet

Material: Alloy Steel

Color: White

Product Dimensions: 36.5"L x 24"W x 43.5"H

Item Weight: 258 Pounds

Brand: ‎Jet

Material: ‎Alloy Steel

Color: ‎White

Product Dimensions: ‎36.5"L x 24"W x 43.5"H

Item Weight: ‎258 Pounds

Style: ‎Planer/Molder

Power Source: ‎Corded Electric

Base Material: ‎Alloy Steel

Cutting Depth: ‎0.06 Inches

Included Components: ‎Planer/Molder, Dust Chute, Extension Roller Assemblies (x2), Hardware, Wrenches, Accessory Package

Cutting Width: ‎13 Inches

Amperage: ‎15 Amps

Maximum Rotational Speed: ‎4500 RPM

UPC: ‎662755171147 627551711478

Manufacturer: ‎JET

Global Trade Identification Number: ‎78

Part Number: ‎708524

Item Weight: ‎258 pounds

Country of Origin: ‎Taiwan

Item model number: ‎JPM-13CS

Is Discontinued By Manufacturer: ‎No

Voltage: ‎115 Volts

Horsepower: ‎1.5 hp

Item Package Quantity: ‎1

Batteries Included?: ‎No

Batteries Required?: ‎No

Warranty Description: ‎5-Year Warranty (if used for commercial or industrial purposes then defaults to a 2-Year Warranty)

Date First Available: November 8, 1999