Buy Now, Pay Later
As low as
$9
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
Non-returnable item
Learn more
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
Availability:
In Stock.
Arrives
Friday, Aug 1
Recently Viewed
Features
- Bonds in Tough Conditions You can apply our American made vinyl adhesive in temperatures ranging from 35 to 95 degrees Fahrenheit (from 2 to 35 degrees Celsius), as well as underwater, and it will stay malleable
- Sturdy and Flexible Our highly regarded HH-66 Vinyl Cement sets the industry standard for vinyl material repair, maintenance, and manufacture
- Repair Multiple Types of Vinyl Use HH-66 Vinyl Cement for sealing stitched seams, applying decals, applying patches, and adhering moldings, and it works well with aluminum, copper, fabric, fiberglass composite, nitrile foam, nitrile rubber, PVC vinyl, steel, urethane, vinyl film, vinyl foam, vinyl laminate, vinyl-coated materials, and wood
- Brushes on Smoothly Use the included brush or a roller to apply the adhesive to the vinyl fabric or to the hard plastic, and it will go on smoothly
- Made in the USA - RH Adhesives manufactures all its superior products in the USA and has been doing so proudly since 1949
Brand: RH Adhesives
Specific Uses For Product: Manufacturing, Vinyl Pool Liner Repair, Sealing Stiched Seams, Applying PVC Vinyl Decals, Applying Vinyl Patches, Adhering Moldings See more
Material: Solvent-Based Adhesive
Compatible Material: Pvc Vinyl, Vinyl Film, Vinyl Foam, Vinyl-coated Materials, Rigid Plastics, Glass, Leather, Wood. Note Hh-66 is Not Compatible With Tarps Made of Polyethylene (Typical "Blue Tarp" Material) - Sometimes Called "Poly Tarps" - Or With Extremely Thin Vinyl (Used for Lettering Or Wraps). See more
Item Form: Liquid
Is Discontinued By Manufacturer : No
Product Dimensions : 4.24 x 4.25 x 5.4 inches; 2 Pounds
Item model number : HH66-32oz
Date First Available : November 7, 2013
Manufacturer : RH Adhesives
Country of Origin : USA
Best Sellers Rank: #9,184 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #35 in Contact Cements
#35 in Contact Cements:
Customer Reviews: 4.6 4.6 out of 5 stars 815 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, Aug 1
This item is non-returnable:
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Top Amazon Reviews
Product review: This is the stuff the pros use! Ask at the pool stores, and if they’re honest they will confirm. Seriously good product for pool/vinyl repairs. It is a strong solvent base, that softens the mating surface and then bonds the two surfaces together very securely. Read the directions and WATCH YouTube videos to learn best practices. Once fully cured, it is super strong! Downsides-Package arrived with product leak out into the box. I was going to return it, but needed the larger volume from Amazon so I used it. Meh! The little application brush attached to the lid was pretty weak. I ended up using small a craft brush (thanks Honey!) to quickly apply enough product to get the job down. The body/viscosity of the HH was a little too runny for me. I was doing vertical vinyl adhesions and it was a challenge to get enough on and not have it run beyond my patch areas. BUT it works great, and once you get your rhythm down it works perfectly. The bonded sections I patched are as strong as (stronger?) the original body of the vinyl. Highly recommended!
...
show more
Reviewed in the United States on July 12, 2020 by v75rab
Easy to use, fast to adhere. Strong! Worked well as described.
Reviewed in the United States on May 9, 2024 by Judith Boyer
Works really really good! But make sure the surface isn’t wet while applying!! Dry time is super fast!! The smell isn’t as strong. Super durable
Reviewed in the United States on August 25, 2024 by Jessica Dale
Great product. Gave it a 4 out of 5 because I recieved it ans the brush inside was broken off. Other then that, the product does what it's designed for.
Reviewed in the United States on June 14, 2024 by Army Mike
I purchase this adhesive for my Tonno pro LR-2020 that I purchased on July 2017. In 2020 I had to get it repaired at an upholstery shop because the stitching came undone under the AZ sun they sew everything back up and I was able to use it for another three years. That repair cost me a little over one hundred dollars. Again, now in 2023, the stitching failed, this time in Texas, and repairing it would cost a little more than the first time almost $200. I don’t have the money to get a new one nor the money to pay for such an expensive repair. I’ve been scouring the internet to find a cheaper venue to get my tarp fixed. I first tried re-sewing it myself. That did not work and ended up injuring my finger with the needle. I was about to give up when I decided to look if there was a glue out there that was flexible and strong when it dried. I had tried using epoxy and other glues on other vinyl pieces, but they were too hard, and they cracked when I would roll them up. I came across this glue. Decided to give it a try. So, $50, and 3 days later I get the product. I laid my tarp down, cleaned off all the thread, and used alcohol to clean up all the dirt where I was going to apply this glue. If you are doing a large area you might want to do it in sections. I tried doing the whole side at once and it became difficult to brush in the glue after I got halfway, that is because after a couple of minutes, the glue starts becoming tacky and hard to brush in the rest of the way So, I had to do half first, give it another, minute or so then mate both sides together, I then had to repeat the process for the Velcro which at first I thought I’m might not work because it is not vinyl. I did both sides and after about 30 minutes of letting my tarp sit there, I could tell that this was going to work. Everything had sort of cured to the point where I could not pull the vinyl or the Velcro apart. So, to be safe I let it sit there for a full 24hrs like the manufacturer states. The next day after inspecting it I felt confident that it was good to go back on the truck. I put it on and gave it a few rolls for testing and man this glue is awesome. Everything is holding nice and strong; nothing is coming apart and it was so much easier than anything I’ve tried. If you have the same issue with your truck cover, I recommend you give this adhesive a try. Remember though. Preparation of the work area and material is key, and remember… let the glue get tacky before mating (you must). Don’t throw your truck tarp away or buy a new one. Try this first. I don’t regret spending the money on HH-66 adhesive. I bought a 32oz can and I used half a little less than half a can. My truck is a 2017 RAM 1500 with a 5' 7" bed. so, I glued a total of (L x W) 11’ X 1” of tarp with almost half of a can of 32oz of this stuff. BTW, the glue dries clear to slightly white depending on the amount you put on. I spilled al little on the tarp and as you can see in one of the pictures it dried clear. ****** Update 04/26/23****** It's been a little over a month since I glued my tarp using this cement/glue. everything was looking good but I have noticed now that the velcro material did not adhere to the tarp as I thought it was going to. it held well for the first couple of weeks or so but then it just become unglued. The glue/cement did great bonding tarp to tarp but not so good velcro to tarp. I have to now find a different solution or glue to bond the velcro to the tarp. If anyone has any suggestions I am open to hearing them. Thanks.
...
show more
Reviewed in the United States on February 14, 2023 by Tha Tha
HH-66 Vinyl Cement is like the ultimate glue for your wildest repair dreams—it’s the superhero of adhesives that makes everything stick together like they were meant to be best friends! Whether you’re trying to mend a tear in your favorite inflatable pool or patching up a vinyl boat cover that’s seen better days, this stuff works faster than a cat chasing a laser pointer! The formula is so strong that you might start to wonder if it can also fix your broken relationships (but let’s stick to vinyl for now). Just a dab and your vinyl items will be back in action, ready to take on the world—or at least your backyard BBQ. Plus, it dries clear, so you won’t have to worry about unsightly glue marks ruining your aesthetic. It’s almost like magic, except you won’t need a wand or a wizard’s hat—just a tube of HH-66 and a little bit of faith in its powers. So, if you’ve got vinyl in distress, grab some HH-66 Vinyl Cement and watch it work wonders. Just remember, it’s great for sticking vinyl together, but we can’t guarantee it’ll fix your love life!
...
show more
Reviewed in the United States on September 29, 2024 by KJ
good product, comes with applicator
Reviewed in the United States on September 19, 2024 by Amazon Customer
I had a large pyramid water toy that some boys caused the mesh flooring to separate from the main structure. I also had a couple leaks at the seams. I was able to reattach the mesh flooring and repair the holes fairly easily with the help of my son. (Three people would have been better.). It was a fall day but sunny. The biggest issue we had was how quickly it dried to a tacky surface. We had to work hard and fast to get everything just right. We then had to hold it in place for 15-20 minutes for it to hold well enough to release it. Another set of hands would have helped. The brush in the can is fairly small and doesn’t hold a lot of adhesive and the wide stem drips a lot as you are moving to the surface to be glued. I would have preferred something like what comes in a can of PVC pipe cement. More like a ball of material on the end of a wire stem. Perhaps they have tried that and it didn’t work well. I had to do a lot of pouring and spreading with the applicator brush and stem. It was actually fairly effective.
...
show more
Reviewed in the United States on October 21, 2023 by TBeck