Goodyear Air Hose Reel Retractable 3/8" Inch x 50' Foot SBR Rubber Hose Max 300PSI Heavy Duty Industrial Steel Single Arm Construction
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$16.53
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
Returnable until Jan 31, 2025
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
May 25 – May 31
Features
- REEL SPECS; This 3/8" inch x 50' foot reel is constructed of heavy gauge Industrial steel; corrosion resistant powder coating; Premium Commercial SBR Rubber Hose working pressure is 300PSI/20BAR and 1/4" inch MNPT connections; (Lead-in hose not included)
- HOSE SPECS; Premium Commercial SBR Rubber Hose is a blend of Styrene-Butadiene Polymers, lays flat, has superior durability and aging stability; Resistant to; Water/Oil, Heat, Weather, Abrasion and works in conditions of -40F to 226F (-40C to 108C)
- INDUSTRIAL DESIGN; This Reel utilizes a fully enclosed multiposition release ratchet spring locking at any desired length; a steel stamped adjustable single guide arm supports angular pull; L-Shape mounting base with groove reinforcement for stable support
- UNIQUE FEATURES; Full flow solid swivel joint hose inlet connection protecting against leaks;Stiffening Ribs, includes an Adjustable Hose Stopper and 4 Non Snag Rollers, that assists to reduce hose abrasion; suitable for both air and water usage
- SAFETY and PROPER USE; Our reels are best suited for indoor/outdoor use, night or day environments, for DIY or industrial applications, allowing extension to be properly stored, keeping the workplace safe
Brand: Goodyear
Material: Rubber
Color: 3/8" X 50 Ft. Single Arm Air/Water Hose Reel
Item dimensions L x W x H: 19 x 7.9 x 21 inches
Style: Heavy Duty,Adjustable,Unique
Is Discontinued By Manufacturer : No
Product Dimensions : 19 x 7.9 x 21 inches; 31.31 Pounds
Date First Available : June 1, 2016
Manufacturer : ITI
Best Sellers Rank: #14,419 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #4 in Air Tool Hose Reels
#4 in Air Tool Hose Reels:
Customer Reviews: 4.5 4.5 out of 5 stars 1,248 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
May 25 – May 31
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
This is an excellent unit for the money. It is very sturdy with a solid frame and hose reel assembly that can be floor, wall, or ceiling mounted. I used 3/8"x 1-1/2" lag screws and washers to secure it to the bottom of a shelf (with 2x4's) just above my compressor. Leave about a two inch gap between the edge of the reel and the floor/wall/ceiling when you mount it to give the hose a little extra room. From reading the instructions, I thought I would have to do a lot of setup and adjustments to get the unit working properly. Not So! Once I had the unit mounted and connected to the compressor it worked flawlessly from the get-go with no adjustments necessary. The spring return tension was set at the factory and worked perfectly the first time I tried it. One thing that is a little tricky is the connection of the hose between the reel and your compressor. The unit ships with a 50' hose installed on the reel, but DOES NOT ship with the interconnect hose, so you will have to provide your own. I ordered the matching 3' Goodyear hose because my compressor was close to the reel. You may need a longer hose if it's farther away. The reason I say it is tricky has to do more with physics than the equipment itself. When you screw the hose into either the compressor end or the reel connector it's no problem, HOWEVER, now you have to screw the other end of the hose to the other device. As you start turning the hose in, it starts to twist it tighter and tighter into a knot until you have an unworkable mass of rubber hose. Not good. There are probably fittings available that allow the hose to be tightened without twisting, but there is another way. Simply pre-twist the hose 3 to 4 times counter to the direction you will be screwing it in. This way, as you tighten the hose fitting it is unwinding the twists you put in the hose beforehand. It may take a couple attempts but ultimately you should be able to get both ends of the hose attached without twists. As for the reel, the main hose unrolls easily without binding or twisting, with the guide rollers keeping it properly aligned. The guide rollers allow you to pull the hose out at any angle up to 90 degrees on either side. It is a little tricky to get used to latching the hose while extending it. There are three "clicks" every half-revolution or so that you need to time so that you stop pulling right after the first or second click, otherwise, if you go too far past the third click it won't latch and you'll have to go another half-turn and try again. It's pretty easy after a little practice. To release the hose and let the unit wind it back in, simply give it a little downward tug and let it start pulling it in. It's a good idea not to let the hose go flying back in at high speed, rather, slow it down a bit with your hand as it retracts. I haven't had the unit installed very long, but I did drag out all 50' of hose tonight to blast out every smoke detector in the house. This was easily accomplished with the reel holding the hose fully extended while I did my work. Afterwards, with just a little tug and some guidance, the hose easily rewound itself neatly back on the reel. NICE! If things change I'll update this review, but right now I'm quite happy with my purchase.
...
show more
Reviewed in the United States on June 10, 2017 by Hallmarkaholic Hallmarkaholic
Great reel, looks and functions great, cheaper than my reelcrafts. Thanks Good year
Reviewed in the United States on October 14, 2024 by Arthur K
I like everything about this hose and reel. Works great, looks great. Mounting hardware included.
Reviewed in the United States on August 8, 2024 by Jack
This seems like a decent reel and works well. The hose it came with is total garbage and wouldn’t make it thru a summer in my Arizona garage, so I purchased a 3/8” Goodyear hose and put on it made in America. Good American made reels would be Reelcraft or CoxReels but I don’t use one enough to justify the price. This mounted right in place where I had a Northern Tools Klutch Reel mounted. I didn’t even have to drill as it was a perfect fit.
...
show more
Reviewed in the United States on July 10, 2023 by Debbie Paynter Debbie Paynter
The reel retracts wonderfully. I have zero complaints
Reviewed in the United States on September 5, 2024 by Tyler A
A little tricky to hang as you need to either take it apart to screw the base to the wall or use a wrench to tighten the bolts. The unit is very heavy duty with a high quality hose. Definitely worth the value.
Reviewed in the United States on July 12, 2024 by Charles Stantz
Like the quality build and sturdy mount bracket. I had to disassemble my mount bracket from the hose reel to get to the mounting holes so they need to redesign the mounting bracket so you can have a two piece bracket and mount the first one easily and then mount the hose reel bracket to that bracket. The hose reel is spring loaded so once you disassemble the bracket you have to hold the reel in place with some method (I used a pipe wedged to hold the reel in place) Works great though.
...
show more
Reviewed in the United States on April 5, 2024 by psewell66
Love this hose reel. Had one in the shop I grew up in. I was always hanging off the thing and whipping it on things. The Goodyear logo is just nostalgic to me. Be aware mounting is kindof a pain. The instructions aren’t too clear. You have to disassemble the reel from the mounting bracket which takes a 15/16” wrench and a 7/8” wrench on the other side. It comes right apart.
...
show more
Reviewed in the United States on May 30, 2024 by Amazon Customer