Generac HomeLink 50 Amp Portable Generator Manual Transfer Switch Kit | Upgradeable, Indoor Pre-Wired Panel, 8-16 Circuits

Features

• 50-AMP MANUAL TRANSFER SWITCH FOR PORTABLE GENERATOR HOME BACKUP: Powers 10 hard-wired circuits at 120/240V including furnaces, well pumps, and lighting with a push-button rocker switch during outages, no extension cords needed
• MECHANICAL INTERLOCK PREVENTS DANGEROUS BACKFEED INTO THE UTILITY GRID: Utility and generator contacts cannot close simultaneously, meeting NEC Article 702 requirements and protecting utility line workers during outage operation
• 12,000-WATT CAPACITY SUPPORTS 240V HIGH-DRAW APPLIANCES AND WELL PUMPS: At 50A / 120/240V single phase, this switch handles the starting surge and running load of well pumps, electric water heaters, and central HVAC circuits simultaneously
• INDOOR NEMA 1 PANEL INSTALLS BESIDE YOUR MAIN BREAKER BOX AT 15.4" x 15.8" x 4": The power inlet box included in the kit is NEMA 3R outdoor-rated; the transfer switch panel itself is designed for protected indoor wall mounting only
• WORKS WITH ANY PORTABLE GENERATOR WITH A COMPATIBLE 50-AMP OR GFCI-PROTECTED OUTLET: Multi-listed for Siemens, Eaton, and Square D 1-inch standard, tandem, GFCI, and AFCI breakers no breaker replacement required for most existing panels
• EXPAND FROM 10 TO 16 CIRCUITS AND UPGRADE TO AUTOMATIC STANDBY LATER: Interchangeable breakers add circuits as needs grow; the HomeLink platform upgrades to automatic standby for up to an 11 kW Generac generator by swapping the controller only
• 50-AMP CAPACITY IS RECOMMENDED WHEN BACKING UP 240V LOADS OR MORE THAN 8 CIRCUITS: A 30-amp switch maxes out at 7,200W and cannot support 240V appliances like well pumps or dryers; the 50-amp switch handles up to 12,000W for full coverage
• WHAT'S INCLUDED: Pre-wired 50A transfer switch panel, indicator lights, wiring harness, 1-1/4" ENT conduit and fittings, 12-inch pre-wired whip, and installation manual; power inlet box and generator cord included in kit model 9855 only

Description

The Generac HomeLink 50-amp manual transfer switch (model 9854) powers up to 10 hard-wired home circuits from any compatible portable generator during an outage — with a push-button rocker switch, no extension cords, and a clear upgrade path to fully automatic standby power. Do I need a 30-amp or 50-amp switch? If you plan to back up any 240V appliance — well pump, electric dryer, central air conditioner, or electric water heater — the 50-amp switch is the right choice. A 30-amp switch is limited to 7,200W and cannot support 240V double-pole circuits. The 50-amp HomeLink handles up to 12,000W at 120/240V single phase. How many circuits do I need? This switch comes pre-configured for 10 circuits and expands to 16 using interchangeable breakers — no rewiring required. Most households comfortably protect essential loads across 10 circuits: furnace, refrigerator, well pump, lighting, and two or three additional circuits. Will it work with my generator brand? Yes — the HomeLink is compatible with any portable generator that has a 50-amp CS6377 or compatible GFCI-protected outlet. It is multi-listed for Siemens, Eaton, and Square D GFCI and AFCI breakers. Is the enclosure rated for outdoor use? The transfer switch panel is NEMA 1 rated for indoor installation only — mount it beside your main breaker box. The power inlet box (included in kit 9855) is NEMA 3R rated for outdoor wall mounting. How does it prevent backfeed? A mechanical interlock ensures utility and generator power contacts cannot close at the same time, preventing backfeed into the utility grid per NEC Article 702. Is it manual or automatic? This is a manual switch — you push a button to transfer circuits during an outage. When you are ready to move to a standby generator, the HomeLink platform upgrades to automatic operation (up to 11 kW Generac) by replacing the controller only, without replacing the switch. Professional installation by a licensed electrician is recommended for all line-side connections and NEC code compliance. A 50A 2-pole breaker in the main load center is required and must be sourced by the installer.

Operation Mode: manual

Current Rating: 50 A

Contact Type: Normally Open

Connector Type: Wire Leads

Brand: Generac

Switch Type: Rocker

Terminal: Screw

Material: Brass, Copper

Item dimensions L x W x H: 15.4 x 15.8 x 4 inches

Circuit Type: 1-way

Operation Mode: manual

Current Rating: 50 A

Contact Type: Normally Open

Connector Type: Wire Leads

Switch Type: Rocker

Terminal: Screw

Circuit Type: 1-way

Mounting Type: Panel Mount

Actuator Type: Rocker

Number of Positions: 16

Controller Type: Push Button

Control Method: Touch

Connectivity Protocol: X-10

Wattage: 11 KW

Compatible with Vehicle Type: portable generator

Control Type: Manual

Compatible Devices: Generac XG10000E, XP10000E, GP15000E, GP17500E

Color: Gray, Black

Item Dimensions: 15.4 x 15.8 x 4 inches

Unit Count: 1 Count

Number of Items: 4

Material Type: Brass, Copper

Contact Material: Copper, Brass

International Protection Rating: IP00

Specification Met: (unset)

Brand Name: Generac

Model: 9854

Global Trade Identification Number: 81

Manufacturer: Generac

Warranty Description: 5 year limited

UPC: 696471071481

Included Components: Manual transfer switch & installation guide, wiring harness, conduit & fittings

Item Type Name: manual transfer switch

Item Weight: 26 pounds

Part Number: 9854