Search  for anything...
EMILYPRO

EMILYPRO Shaft Arbor Extension 1/2" and 5/8" Motor Arbor Threaded Shaft Adapter Thicker Version for Buffing Grinding Wheels / For Bench Grinder - Right 1 Pack

    • Based on 463 reviews
Condition: New
Checking for product changes
$13.99 Why this price?

Buy Now, Pay Later

As low as $3 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 20 left in stock
Fulfilled by Amazon
Arrives Wednesday, May 22
Order within 12 hours and 52 minutes
Available payment plans shown during checkout

Recently Viewed

Size: for Grinder 1/2" & 5/8" Thick V. 1 Pcs


Description

Size: 1/2" & 5/8" Motor Shaft Arbor Extension Adaptor Thicker Version Right Side Package includes: 1 set 1/2" & 5/8" Motor Shaft Arbor Adaptor right side: ------Main body 1pc, inner adjust tube 1pc, tighten screw 1pc, washer 2pcs, hex nut 1pc, L-shape hex wrench 1pc Detail size: Tube side OD x ID x L：7/8" x 5/8" x 1-5/8"; Inner adjust tube ID：1/2"; Screw side dia x L：5/8" x 2-1/8"; Hex nut dia x thickness: 1-1/16" x 7/16"; Washer dia x thickness: 3-1/16" x 1/8"; L-shape hex wrench: long part 2-1/4", short part 7/8". Q & A: ◆What’s the function of this shaft arbor adaptor designed for? →This Shaft Arbor Extender is designed to convert 1/2" or 5/8" shaft electric motor to 5/8" threaded shaft buffing machine, or transfer 5/8" Bench Grinder shaft to 5/8" threaded shaft. ◆What kind of wheels it is suitable for mounting? →This Electric Motor Arbor Threaded Shaft Adapter suitable for mounting Buffing wheels, Polishing wheels, Grinding Wheels, Wire brush wheels, as long as the arbor hole is 5/8". ◆How to use? →Attach the tube side to your motor arbor or bench grinder shaft, fasten the hidden screw to make it fastness, use the 2pcs washers sandwich cinch the buffing/grinding wheels etc, then tighten the nut and start buffing work. ◆Why you need buy one? →Save your money, just a small Motor arbor shaft extension adapter can create a new grinder or buffing machine, make your Motor like a transformer, really worth your money back. ◆If you like it and also it is the one what you want, add it to your cart then take it back home! Any question pls don’t hesitate to send email to us😊

Manufacturer: ‎EMILYPRO


Part Number: ‎PJ-008


Item Weight: ‎14.4 ounces


Package Dimensions: ‎4.9 x 4.4 x 0.6 inches


Item model number: ‎PJ-008


Size: ‎for Grinder 1/2" & 5/8" Thick V. 1 Pcs


Item Package Quantity: ‎1


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: June 15, 2020


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Wednesday, May 22

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Works well…
Size: for Grinder 1/2" & 5/8" Long V. 1 Pc
Solid arbor extender. Good customer service. I bought 2 of these. One was fine. On the other the inner sleeve was out of tolerance (too small) and wouldn’t fit over the grinder shaft. The vendor replaced it, and the replacement was fine.
Reviewed in the United States on August 11, 2023 by MrFolgers
    • Proprietary Nut
Size: for Grinder 1/2" & 5/8" 1 Pc
The nut provided or threaded shaft is non-standard. They are not any standard size, ansi or metric that I could find. As long as you do not need a replacement nut you should be fine. The unit fits on a 1/2in. shaft with some wobble in rotation but tolerable.
Reviewed in the United States on November 10, 2023 by Joey K.
    • Product as described
Size: for Grinder 1/2" & 5/8" Long V. 1 Pc
fast delivery
Reviewed in the United States on October 20, 2023 by Joseph M. Ruperto
    • Great product
Size: for Grinder 1/2" & 5/8" 1 Pc
Fit like a glove
Reviewed in the United States on October 14, 2023 by Tom Sampey
    • Worked well in my old repurposed grinder.
Size: for Grinder 1/2" & 5/8" Long V. 1 Pc
Review Image by Baroque Tossit Baroque Tossit
I replaced my old bench grinder with a new one and decided to 'upgrade' the old one with a new wire wheel and adding a buffing wheel. The old grinder's housing was a bit too close (IMHO) to add a buffing wheel so I installed the EmilyPro shaft extension (the longer version). Fit and finish was (barely) acceptable - the interior of the extension staff was burred and had to be cleaned up before it would slide over the grinder arbor shaft. In addition the retaining nut (13/16 o.d.) did not thread onto the EmilyPro arbor shaft until I cleaned up the shaft threads. Quality control may not be quite the best I've ever seen. Once installed (simple installation, remove the old grinding wheel, remove the grinder's guard, slide the EmilyPro onto the grinder arbor shaft, secure with the included hex screw using the included hex wrench, install the included retaining washer, install the buffing wheel, install the second included retaining washer, and thread on the retaining nut. Note that the EmilyPro I installed was for the right side of the grinder. After reading reviews I was concerned about vibration but that turned out to be not a concern - there is some vibration but not enough to cause a problem. YMMV. I'd recommend the EmilyPro, but with the caveat that you may run into quality control issues so don't expect necessarily a plug-n-play solution. I'd also recommend not making any alterations to the adapter that would prevent you from sending the unit back in case there are vibration issues. Including the cost of the new wire wheel and the EmilyPro and I added functionality to my basement shop for about $40 - better than sending the old grinder to the recycle yard. Total time to upgrade the grinder (including cleaning up the EmilyPro threads and inside shaft) was about 30 minutes. ... show more
Reviewed in the United States on May 4, 2022 by Baroque Tossit Baroque Tossit
    • Be prepared to modify your bench grinder
Size: for Grinder 1/2" & 5/8" 1 Pc
Installing this with only the included items will not work. It does not sit properly on the shaft and vibrates badly. Had to alter the shaft on my bench grinder to get it to work smoothly.
Reviewed in the United States on September 23, 2023 by Larry
    • Better than I expected based upon other comments.
Size: for Grinder 1/2" & 5/8" Thick V. 1 Pcs
I ordered and received the "thicker" version which mounts on a smooth 5/8 inch motor shaft and has a 5/8-11 threaded shaft. It was a very tight fit on my motor shaft, which is a re-purposed 1.5HP pool motor. The motor shaft end has two set screws, both of which (on mine) went into threaded holes using the provided 1/8 inch Allen wrench and worked as expected. The threaded end of the shaft is smooth next to the end that mounts on the motor and is a smaller diameter. That seemed odd but was easily taken care of with the addition of another 5/8-11 nut (gotten from Lowes) tightened up between the threaded end and the mounting end. The nut covered the smooth, smaller part of the shaft. Then the washer flanges mounted flush to that nut and eliminated any wobble that might have occurred due to the differences in diameter of the threaded and smooth parts of the shaft. All in all, an inexpensive solution to turn an unused motor into a grinder or sander. ... show more
Reviewed in the United States on February 8, 2023 by Tom N.
    • More Multiple Uses
Size: for Grinder 1/2" & 5/8" Long V. 1 Pc
I bought the long version, all parts were there. NOTE: the nut and male threaded portion are Not Standard thread sizes. For a simple motor extension that's fine I suppose. But, I'm using mine as others have, as axle extensions for a HF Predator generator. I picked up some wheels to fit the extension's threaded portion, with the idea that I would double nut to keep wheel loose enough to roll, yet not fall off. I'd just buy 4 more nuts and be good. No Way! Neither US nor Metric size. So I'll try single nut and thread locker. If that doesn't work, I'll drill and use kotter pin and washer. In 2022 I expect all products to be built to fairly universal standards. I don't know, maybe the Chinese have their own standards. Not a good idea in a world market. ... show more
Reviewed in the United States on October 11, 2022 by Howard

Can't find a product?

Find it on Amazon first, then paste the link below.