Creality Official 3D Printer Enclosure, Fireproof and Dustproof Tent Constant Temperature Protective Cover Compatible with Creality Ender 3/ Ender 3 V3 SE/Ender 3 V3 KE, 21.65”x 25.59”x 29.52”
Condition: New
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
$10
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Size: Ender-M
Features
- Offering a Constant Temperature EnvironmentCreality 3D printer enclosure will perfectly improve your printing success, especially in winter and wet area. It keeps a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.
- Safe to UseThe interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. And don't worry about the strong odor from printed plastic, as it will stay in the tent, which will will keep your healthy.
- Simple Installation and Stable StructureEquipped with a selection of glass fibre pipes, stable structure, abundant space and foldable storage does not take up space. And there are zippers on the front and top of the box which convenient for you to observe the printing of the model at any time.
- Noise ReduceThe 3D printer enclosed build chamber would effectively block the noise during printing. It can also be used as a dust cover to prevent the printer from being covered with dust when you're not using it.
- Compatible with Most 3D PrintersVolume: 21.65x 25.59x 29.52. Compatible with Ender 3/ Ender 3 V3 SE/ Ender 3 V3 KE/ Ender 3 V2 Neo/ Ender 3 V3/ Ender 3 V3 Plus/ Ender 3 Pro/Ender 3 V2/CR-100/CR-6SE/CR 20 pro.
Brand: Creality
Material: Aluminum
Color: Ender-M
Compatible Devices: Laptop, Smartphone
Operating System: Linux
Package Dimensions : 15.39 x 8.35 x 4.21 inches; 2.82 ounces
Date First Available : August 26, 2023
Manufacturer : Creality 3D
Best Sellers Rank: #45,536 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #621 in 3D Printer Accessories
#621 in 3D Printer Accessories:
Customer Reviews: 4.3 4.3 out of 5 stars 360 ratings
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: Ender-M
The pieces have to go allll the way in to fit the frame in the enclosure. Are you super human? If not, a rubber mallet is a quick solution. Encloses my ender 3 pro nicely, does take up some serious space. However, it’s much cooler and quieter running in the enclosure so I think it’s a good trade off. I didn’t get it with print improvement in mind, but my prints have been better.
...
show more
Reviewed in the United States on July 28, 2024 by Jennifer Goodman Jennifer Goodman
Size: Ender-M
Right size for Ender v3 KE, smooth forward and backward movements of the heating bed. Installation without drama, the materials are also good - strong fiber glass frameworks, no stains/cracks on the inner aluminum cover. The zips are also made with quality, open or close without issues.
Reviewed in the United States on May 21, 2025 by Felix
I bought this enclosure so I could have warmer, more constant temperatures to print with ABS. I've done PLA/PLA+/PETG just fine, but my ABS prints have always failed. It's toasty-warm in the enclosure now, printer sounds are a bit muffled, which is an added bonus. SETUP: Setup was easy, I took my time to put the rods as deep into the couplers as I could, so when it came to putting on the shroud, it was an easy task. SIZE: This visually seems like a very large enclosure, which makes sense because previously I had no enclosure, so the printer visually looked smaller and had more "air space" for reaching across and/or thru the printer. Inside, there is approx 1" of clearance on the left side. I have it snugged up against the enclosure's frame rod on the ride side. ~1.5" clearance to the top. I have the printer pulled to the front of the enclosure so that the bed, when fully extended forward, is ~1/2" clear of the front flap, which gives ~3.5" clear to the back. I would have liked another 1" of width, but in order to get that, I would have had to go up a size for the enclosure which would have made it too deep for my countertop. QUALITY: The shroud is a nice medium-heavy-weight canvas, and the zippers are sturdy and operate smoothly. The frame is pretty darn low-tech with its plastic connectors, but I think as long as the zippers stay smooth, there wouldn't be stress on the actual frame, so I'm not concerned about the connectors. I agree with another reviewer who suggested that the rods just be longer to eliminate the middle connector. ACCESSIBILITY: The zipper flap opening is just about the entire front and top of the unit, except for a 3" at the bottom of the front. There is a large side flap ~11" x 6" which closes securely with velcro. More on that in CONS. Right after getting the printer set into the enclosure, I remembered that I had intended to change my extruder gear. So I got to experience a minor "repair" while it was in there. It's obviously not as easy as when the printer was "open air", but still doable. For anything other than a simple swap like that, I'll probably just remove it from the enclosure. CONS (for me): The small width didn't leave room for my printed filament guide, so for now, I've stuck some Christmas light holders to the inside face of the shell - they're not great, but until I find a different filament guide and get it printed, they'll do. The side flap. How I wish it was centered horizontally, I do a lot of color-change prints, and having that flap back just a bit would help tremendously. Also, since the flap is so close to the bottom of the enclosure, it feels like it would have made more sense for it to open down. Yes, it has a strip of velcro on the outside, so the flap can be rolled up and held in place, but my feeling is that top-down would have been a better way for this to open.
...
show more
Reviewed in the United States on September 25, 2023 by gayle jensen gayle jensen
The media could not be loaded. I print in a cold garage. Needed something to try and stop my prints from warping. This enclosure is excellent. Instructions to assemble were honestly terrible. Front/Rear are two #1 Rods Left/Right are two #2 Rods Then 2 #3 Rods for the sides. Tight squeeze to get the frame in the enclosure, but that is a good thing. So far this works great, I don’t think it really changed the noise coming from it. Print wise it’s going awesome.
...
show more
Reviewed in the United States on January 26, 2025 by SAMellor SAMellor
(Ender-3 V3 SE) As you see in the pictures, they have good piping and joint materials now. Use spit or some soapy water. Do not use a hammer. They are not super strong, and they really do not need much force. Just a little juice will help them slip in. Each section has a straight joiner. I did all of those first, and then I did the corners to check to see if everything was flat. Then I connect the top and bottoms to check for flat and true. With the soap water, everything was good and slippery and needed no real force. I put the frame in the FULLY unzipped tent. GO SLOW. Take one's time. It will fit. The tent was folded teeny tiny. But it will unfold and straighten up, and wow. It fits perfectly on the frame. One you have the frame covered with the tent, gently place your Creality inside. As you can see I have the Ender-3 V3 SE. I checked the bed to make certain it had a full range of motion to the front and back, and checked the sides so that the display screen didn't touch nor the cables on the left were too bunched up. The filament cable spool doesn't touch if you push a bit on the upper door. All in all, an A+ product for the price. 5 thumbs up!
...
show more
Reviewed in the United States on February 16, 2024 by Charlie Blake Charlie Blake
Size: Creality-L
Based on the reviews I decided to purchase this enclosure over some cheaper ones. Let me preface this review by saying I have not yet tried printing in this. From the looks of it, this enclosure will do fine printing. However, the fit and finish is lower quality than I was hoping for. It’s not bad but it looks cheap. The BIGGEST issue I have with this product is the assembly and quality of some parts. This thing was horrible to assemble because of how tight the tolerances are. I had to physically struggle to get the corners on the frame and I’m not out of shape. The zippers are horrible quality and separate all the time. All in all while it may work it is not worth what they charge for this level of quality control. Sorry Creality. Love your other stuff though.
...
show more
Reviewed in the United States on December 2, 2024 by Dennis Dennis
This was easy to put together and comes with a few extra pieces. works well with my ender 3 pro and has enough room for my top mounted filament. it feels sturdy enough and my prints come out great even in cold weather.
Reviewed in the United States on March 21, 2025 by Dots
This enclosure is super spacious and comfortably fits my large Artillery Sidewinder X2, a filament dryer, and tools needed for everyday printing. It is well insulated and doesn't leak the warm air needed to get great prints. The temperature and humidity gauge is nice to be able to monitor the environment inside. The zipper is sturdy and opens all the way from the front to the top of the enclosure making it easy to put your 3D printer inside and also work with it while it's inside.
...
show more
Reviewed in the United States on May 1, 2025 by Kimberly