Search  for anything...
Zhong Hua Jiang

CNC Spindle Motor Kits, 110V 1.5KW 65mm Water Cooled Spindle Motor CNC motor +110V 1.5KW VFD+Clamp Mount +Water Pump+ Water pipe+ER11 Collet set + Drill bits+ wires+wrenches for CNC Router Machine

    • Based on 5 reviews
Condition: New
Checking for product changes
$349.99 Why this price?
Save $299.01 was $649.00

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, May 21
Order within 18 hours and 27 minutes
Available payment plans shown during checkout

Recently Viewed

Style: 1.5KW 65mm kit


Features

  • PACKAGE LIST-1pcs 110V 1.5KW 65mm Water Cooled Spindle Motor +1pcs 110V 1.5KW VFD + 1pcs 65mm Clamp Mount +13pcs ER11 Collet(1mm-7mm) +1pcs Water Pump+ 5 meters Water pipe+10Pcs CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches
  • SPINDLE ADVANTAGE -It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle motor.
  • EASY AND FAST TO ASSEMBLE -The VFD has been programmed, you don't need to make setting up. We offer pre-soldered aviation wire and power wire, You will take 5 minutes to connect spindle motor with VFD.
  • WIDE APPLICATION-Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
  • WARRANTY ASSURANCE-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.

Manufacturer: ‎huajiang


Part Number: ‎ytx-110V-1.5KW 65mm water kit


Item Weight: ‎17.18 pounds


Package Dimensions: ‎14.96 x 14.29 x 7.13 inches


Country of Origin: ‎China


Item model number: ‎ytx-110V-water-1.5KW kit


Style: ‎1.5KW 65mm kit


Power Source: ‎ac


Included Components: ‎wire, drill bits


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: September 9, 2022


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, May 21

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Works out of the box
Style: 1.5KW 65mm kit
Previously I had a Huanyang which stated everything was ready out of the box but many many settings were not right. This time I went through all the major settings and they all appeared to be ok. Wired it up and connected to the spindle and it is spinning. Have yet to actually cut something. A couple of item: The prewired cable is kind of short, at least for my purposes as I have the cables, water and vacuum hoses overhead. 15 feet is just not long enough. The water pump fitting for the water line is far too large, 1/4" simply will not go into the water line. I had another 6mm fitting and used that. The electrical cord is only 2 conductor! A bit dangerous given that the spindle case is exposed. I replaced the electrical cord with a 3 conductor and a proper earth ground. It's now end of March and have decided I need more power. Currently resurfacing white oak planks I milled is terribly slow. Best I can do is about 1mm depth at 2000mm/min at 16000rpm. I should have looked closer, the spindle is clearly marked as 8A at 110V which is 880watt, NOT 1500 watts or even close. I see they marked the 220V also at 8A witch is 1760 watts NOT 2200 watts. ... show more
Reviewed in the United States on December 8, 2022 by Dave Carlton
    • Works Great on My Shark CNC 510
Style: 2.2KW 80mm kit
Review Image by MN Coop MN Coop
Review Image by MN Coop MN Coop
I am new to CNC, so I may change my review on this over time, but as of today, I am super happy with my purchase! I have a Shark 510 and needed a spindle. After a bit of reading, I decided to get a water cooled spindle. I went on Amazon and found this one. So far, it has done the job extremely well for me. I live in MN and the CNC is in the garage, so the machine is subject to "cold". To prevent freezing, I used a 1 gallon premixed car antifreeze instead of water for my cooling solution. I sealed the bucket w/ a glue gun and so far have had no problems. The shark spindle clamp is built for 88mm spindle, and this one is 80mm. The clamp that comes with the spindle would have required me to modify my CNC, so I decided to McGyver a solution. I had some 1/4 plastic and cut out some spacers. The spindle is plumb and It works awesome. Last problem to solve is that right now I have to hit the run button on the inverter to start the spindle. I am looking to bypass that so the power can be turned on / off through my CNC. I have submitted a question to the MFG on that. Hopefully I get an answer in a couple of days. So far, I highly recommend this spindle. I will update over time if something changes. ... show more
Reviewed in the United States on February 5, 2023 by MN Coop MN Coop
    • The setup is extremely frustrating
Style: 1.5KW 65mm kit
I've received the spindle only to realize that there was only one cord in the box for the power but not from the console to the spindle so I have to go buy my own. The power cord has quick release connectors soldered on that are too big to fit through the holes that go into the console so they need to be either replaced and re-soldered or jerry rigged to connect. The spindle is water cooled and needs 2 water lines yet only one was supplied, I assume the vendor expects you to cut it in half at which point it is to short for my desktop cnc. The water hose has a screw in adaptor to the pump which appears to be 1/4" and is too large to fit so you must supply your own. ... show more
Reviewed in the United States on February 23, 2023 by Skitters
    • Actually what it claims to be.
Style: 1.5KW 65mm kit
The media could not be loaded. Attached video is a sub thou indicator. I could easily believe it's less than 2 tenths with my indicator. They advertised 0.005 mm welp, that's about 2 tenths. I am very pleasantly surprised. However I had to let it break in a little bit to get it that close and really clean the taper well. It wasn't that close out of the box I had to spin it up full speed and let it run for about 5-10 minutes. The included collets are total trash. They might have a run out of 3-5 thou. I tried multiple different ones, no dice. Given that I didn't buy this for the free collets, I'm very happy with the quality out of the box. Only time will tell on the endurance. ... show more
Reviewed in the United States on March 20, 2023 by JordanUnicycle
    • Works well but has issues
Style: 1.5KW 65mm kit
Works as it should. Had issues from the start with the cooling system. Purchased 110v kit. Came with a 220v pump in a 110v box. And the coolant line would not push on the barb fitting had to turn the barb down on my lathe to make work
Reviewed in the United States on April 24, 2023 by Daniel

Can't find a product?

Find it on Amazon first, then paste the link below.