Castle Creations 520Kv Sensored Brushless Motor, 3s-12s, Large Scale RC
Buy Now, Pay Later
- – Up to 36-month term if approved
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Returnable until Jan 31, 2027 Learn more
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
At a glance
- Condition
- New
- Model
- 25 SERIES MOTOR-520KV
- Dimensions
- 2.7"W x 5.8"H
- Weight
- 5.5 lb
- Material
- Stainless Steel
- Speed
- 38000 rpm
- Voltage
- 50.4 volts
- In the box
- 2535-520kV Sensored Brushless Motor
- Warranty
- 1 year against manufacturer defects
Features 5
- EXTREME LARGE-SCALE POWER: Built for demanding 1/4 and 1/5 scale RC applications up to 50 lbs., including gas-to-electric conversions. The 2535-520Kv supports 3S-12S LiPo power with a maximum input voltage of 50.4V.
- SENSORED PRECISION: QUIETSENSE technology helps shield the motor sensors from magnetic field noise, while Flux Shield and secondary sense magnets deliver precise, efficient startups and keep the motor and ESC in sync
- V3 MOTOR DESIGN: Features an enlarged rear bearing, direct-to-bullet winding connections, stainless-steel sleeve rotor and smooth can exterior designed to simplify the addition of water cooling
- BUILT FOR EFFICIENCY & DURABILITY: Oversized NMB bearings, vibration damping and proprietary low-resistance winding techniques help reduce heat while supporting bearing life and dependable performance under demanding loads
- READY FOR SERIOUS POWER SYSTEMS: Features an 8mm output shaft and 8mm male connectors attached to 6-gauge wire. Supports sensored and sensorless operation and pairs with the Castle Cobra 5 HV ESC for a complete 12S-capable Castle power system.
Description
Welcome to the Castle 25 Series. The Castle Creations 2535-520Kv was developed for RC enthusiasts pushing beyond traditional large-scale power systems. Designed for 1/4 and 1/5 scale RC vehicles weighing up to 50 lbs., including gas-to-electric conversions, this massive 4-pole brushless motor supports up to 12S LiPo power while delivering the torque, control and efficiency demanded by serious large-scale builds. Castle's V3 motor architecture combines an enlarged rear bearing, direct-to-bullet winding connections, stainless-steel sleeve rotor and smooth exterior can. Oversized NMB bearings and vibration damping support durability, while proprietary winding techniques minimize resistance for efficient operation under demanding loads. QUIETSENSE technology helps isolate the sensors from magnetic field noise generated by the motor coils. Combined with Flux Shield technology and secondary sense magnets, the system provides precise startups and helps keep the motor and ESC synchronized. Castle's optimized sensor alignment eliminates the need for mechanical timing adjustments while providing uniform timing and torque in both directions. The 2535-520Kv features an 8mm shaft, 8mm male connectors attached to 6-gauge wire, sensored and sensorless operating modes, and a maximum rated speed of 38,000 RPM. Pair it with the Castle Cobra 5 HV ESC for a formidable Castle large-scale power system. Big vehicle. Big voltage. Castle-level control. Welcome to the 25 Series. SAFETY AND TECH TIPS Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor's windings and will not be covered by the warranty. Check motor temperature frequently during the first run after changing gearing, installing a different motor, or increasing battery voltage. Never allow motor temperature to exceed 180°F (82°C), as overheating can permanently damage the motor magnets. We recommend using an infrared temperature gun to monitor temperatures. If the motor approaches 180°F, reduce the pinion size or battery voltage. Do not run a brushless motor at high RPM under no load or little load for an extended period of time, this can cause damage and subsequent failure of a brushless motor and/or an ESC.
Specs 15
| Brand | Castle Creations |
|---|---|
| Model Name | 25 SERIES MOTOR-520KV |
| Speed | 38000 rpm |
| Voltage | 50.4 volts |
| Product Dimensions | 2.7"W x 5.8"H |
| Brand Name | Castle Creations |
| Model | 060-0117-00 |
| Number of Items | 1 |
| Manufacturer | Castle Creations |
| UPC | 819326013669 |
| Item Highlight | High-Performance brushless upgrade for 1/4, 1/5 Scale RC Vehicles up to 50 lbs. |
| Part Number | 060-0117-00 |
| Item Dimensions W x H | 2.7"W x 5.8"H |
| Item Weight | 5.5 pounds |
| Material Type | Stainless Steel |
No specs match.
Frequently asked questions
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.