Auto Body Dent Puller Kit, Auto Paintless Dent Repair Kit with Bridge Puller, Dent Puller Kit, Car Dent Removal Kit Powerfully Pops Car Dents and Other Metal Surface Dents (Kit)

Features

• Physics design - Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.
• Widely used - Suitable for most dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.Note: This dent puller is effective on thin metal surfaces and is not suitable for metal surfaces exceeding 3mm. Applicable dent area: 1.2inch-3.9 inch.
• Easy to use - This paintless dent removal kit is very easy to operate and most dent repair jobs can be completed within half an hour. It is very efficient and effortless to use, and even women can easily complete the repair. In addition, we provide a detailed manual to guide you, if you need help, please don't hesitate to contact us.
• Package information: 1 x Sliver bridge dent puller,6 x Dent Puller Tabs, 1 x Mini Hot Melt Glue Gun,5 x black hot melt glue sticks,5 x yellow hot melt glue sticks,1 x Scraper,1 x Alcohol Spray Bottle(empty),1 x Black Plastic Tab Down Pen
• Satisfactory service: Welcome to contact us, we will answer customer information within 24 hours. Customers have the right to choose a refund or replacement if the product does not work.

Description

The Use of Bridge Dents Repair: 1.Clean the dent with a clean cloth; 2.Put the glue to gun and heat,connect the power source and preheat for 5-10 minutes; 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks. 4.Put the tab at the center of dent and press lightly until the glue cures and adheres, wait a few minutes（should be shorter slightly in winter）; 5.After the glue cooling,use a bridge dent repair to align and press the puller to pull up the dent.Repeat the above steps until the dent disappear; 6.After finishing the dent,Use the alcohol (Not included in the kit) and plastic scraper to remove the glue, clean the repaired place with a clean wet cloth; If the repair fails, please repeat the operation until it is repaired. Tips If there are still raised points on the repaired surface, perform the following operations: 1. Press the raised point back and forth with your thumb until the surface of the raised point is flat. 2. If the raised point cannot be flattened by pressing the thumb, you can try to align the raised point with a leveling pen (the usual holding position of the pen) and gently knock it with a rubber hammer until the repair is smooth. If the repair fails once, you can repeat the operation many times until the repair is successful. (Pay attention to the strength of the pro when knocking oh, too much may have a negative effect)

Manufacturer: ‎Colaer

Brand: ‎Colaer

Model: ‎DENT REPAIR KIT

Item Weight: ‎7.1 ounces

Package Dimensions: ‎5 x 5 x 3 inches

Item model number: ‎Kit

Manufacturer Part Number: ‎RERE232

Date First Available: September 21, 2022