ARCCAPTAIN 160A MIG Welder, 4-in-1 Welder Machine 110V 220V, Flux Core MIG/GAS MIG/Lift TIG Welding/Stick Welding Machine with Synergy, Multiprocess Gas MIG Welder Equipment with 1lb Welding Wire
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$35.00
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Friday, Jun 27
Recently Viewed
Features
- 4-in-1 MIG WELDER: The welder machine included Flux Core MIG/GAS MIG/Lift TIG/ MMA(TIG torch need to be purchased separately),the welding machine boasts a maximum output current of 160A, allowing it to easily handle a variety of welding tasks. With this powerful output, it can weld materials up to 1/5" thick (approximately 5mm), making it ideal for both professional and DIY projects
- SYNERGIC MIG WELDING: 2 steps to start welding-select the welding mode and adjust the current voltage. When using MIG welding, the welding machine will be SYN mode. The voltage and current will be automatically matched according to the diameter of the welding wire. You can also slightly adjust the current and voltage according to your usage habits. Easy to use for beginners and professionals
- ADVANCED DIGITAL CONTORL: This mig welder is equipped with a high-efficiency inverter and a digital MCU, which improves welding stability and performance. The 160A MIG welder Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine
- COMPATIBLE WITH 2/10LB WIRE: This versatile welding machine is fully compatible with both 2lb and 10lb spools of .030" and .035" welding wire, giving you the flexibility to choose the right wire size and spool weight for your project.The welder machine 110V 220V weighs only 14.6lb, and you can freely carry it anywhere with a handle or shoulder strap
- SAFETY PROTECTION: Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards. Note: DO NOT power on until the screen turns off and the fan stops working
Manufacturer: ARCCAPTAIN
Item Weight: 23.4 pounds
Package Dimensions: 18.6 x 14.3 x 12.1 inches
Country of Origin: China
Item model number: MIGWELDER160-FIT
Size: MIG WELDER 160A
Power Source: dc
Included Components: welder machine
Batteries Included?: No
Batteries Required?: No
Date First Available: September 9, 2024
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, Jun 27
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
![Plasma Cutter, 50Amp Blow Back Pilot Arc With [Air Sensor Technology], 110V/220V Dual Voltage Non-HF CNC Plasma Cutting Machine, Digital Screen Display (BTC500XP 11GEN 110V/220V)](https://m.media-amazon.com/images/I/71z8Rd3B9UL._AC_US500_.jpg)
Top Amazon Reviews
Practical looking Welder, fit and finish seems to be good – mostly metal wire feed mechanism is a nice touch; power cord, and the leads needed to be a bit longer like 8' minimum (instead of 6' - 6'-6"), electrode holder and ground are chintzy, with small dinse connection (10-25) – electrode holder also doesn't have indentation/grooves to restrain the electrodes. Wire welding process (Flux Core) works decent up to105 IPM on a 20amp breaker /110v supply and better at 160 IPM on 30amp/220v, but when it comes to Stick welding process neither 20amp/110v nor 30amp 220 is sufficient especially a 7018 (but you might get somewhere with 6013 but with higher than recommended amps) – as per the manual some 50amp input current is needed with is very disappointing.
...
show more
Reviewed in the United States on January 31, 2025 by Tom Jones
Works well on wire feed on 120 volt, but need 220 for the stick welding. Meets my needs. Good value for the money
Reviewed in the United States on January 10, 2025 by Steve M.
really it is hard to say anything bad about this unit for the price...... its nice and small and lightweight so it is somewhat portable ........ much easier to get from point a to point b than a full sized welder..... im no pro and i got this so i could tinker and learn..... and so far i am pretty happy with it..... pretty easy to get started as it included everything you need to get started...... great kit for the price and hard to find a flaw in it for the price range
...
show more
Reviewed in the United States on December 20, 2024 by dingo
retuning item. cannot get it to wire weld. Will try an exchange.
Reviewed in the United States on January 17, 2025 by ddjr
My "Off-On Switch" didn't work. I contacted customer service several times and received nothing! After Amazon refunded my money, lord and behold, arc caption customer service contacted me saying they were very sorry!
Reviewed in the United States on February 8, 2025 by hayman5515
I'm somewhat sad to say that compared to my old Hobart Handler 140 (110v), this 160amp ARCCAPTAIN welder really holds its own. While my old Hobart will likely outlive this one ten times over (it's already 12 years old with no signs of slowing down) the fact is that this machine has more power, dual voltage inputs, and supports not only MIG and flux core but stick and TIG as well. And it does all that for less than half the price I paid for my Hobart 12 years ago. How'd they get it so cheap? Well, the build quality is suspect. The welder's body is made of paper-thin sheet metal, and you can tell every component and accessory has been manufactured of the lowest-quality materials they could possibly get away with. It is also amazingly small and lightweight. Great for portability, but combined with the questionable build quality it results in a welder that feels delicate and breakable. So how's it weld? Better than my Hobart, surprisingly. Please note I am judging this welder in 220v mode, while my old one was 110 only. Not a perfectly even matchup, but it's my only other point of reference. While I had some initial issues with setup (all my own fault, the instructions are very clear) once I got it dialed in it runs flux core like nobody's business. I'm a hobbyist, and flux-core is all I run, period. I don't have the space or money or desire for expensive gas cylinders and all the hassle it entails, and I appreciate the ability to weld outside in the wind, or with a fan blowing on me to clear out the toxic fumes. This ARCCAPTAIN produces amazingly clean, low-slag welds which may have been possible with the Hobart, but required more skill to obtain. The welds this gives me are smooth and trouble-free. It's also noticeably more powerful than the Hobart, not a big shocker considering the extra supply voltage and additional 20 amps output, but it makes a really big difference. It does have its limitations. The 160amp version that I received does not have the ability to manually adjust feed speed, being that it's a "synergic" type welder. While it seems that the automatic feed speed adjustment works well, there are legitimate situations that require more customized settings which this is simply incapable of making. Therefore, you have to move at exactly the speed the machine tells you. You can adjust amps from 40-160 and turn the voltage up or down slightly within a specified range, but that's it. It feels like a set of training wheels that I can't take off. Kind of frustrating, because from what I'm reading the 200amp version of this welder does have the ability to turn the "synergic" mode off. If I was to suggest a welder to someone new to the hobby, I think this could certainly be the one. I'd mainly recommend it to someone who's unsure they want to get into welding, or only has a few small projects in mind. It is so inexpensive, this could easily pay for itself if you only used it once. The problem is, I can tell it's not going to hold up in the long term, so if you're planning to dedicate yourself to welding as a hobby this just isn't what I'd suggest. That said, I got it for free and I'm going to use it til it breaks. If I haven't updated this review with news of it breaking, you can safely assume mine is still working fine to this day.
...
show more
Reviewed in the United States on December 24, 2024 by Adran