ARCCAPTAIN 130A MIG Welder, 110V Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Welding Machine with Synergy, IGBT Inverter Portable Gasless Welder Equipment with Welding Gun and 2lb Welding Wire
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$28.33
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
Eligible for Return, Refund or Replacement within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 10 left in stock, order soon!
Arrives
Sunday, May 25
Recently Viewed
Pattern Name: MIG Welder 130A
Features
- SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030/.035/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
- 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
- SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, its convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
- PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
- WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
Manufacturer: ARCCAPTAIN
Part Number: MIG130
Item Weight: 11.79 pounds
Product Dimensions: 14.9 x 5.3 x 9.7 inches
Country of Origin: China
Item model number: MIG130
Color: Red+black
Material: ABS+Metal
Pattern: MIG Welder 130A
Power Source: dc
Voltage: 110 Volts
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
Date First Available: May 20, 2022
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, May 25
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
![Plasma Cutter, 50Amp Blow Back Pilot Arc With [Air Sensor Technology], 110V/220V Dual Voltage Non-HF CNC Plasma Cutting Machine, Digital Screen Display (BTC500XP 11GEN 110V/220V)](https://m.media-amazon.com/images/I/71z8Rd3B9UL._AC_US500_.jpg)
Top Amazon Reviews
Pattern Name: MIG Welder 200A
The media could not be loaded. I have been really impressed with the ArcCaptain MIG200 multi-process welder. I bought this welder as an upgrade and replacement for my old Millermatic 140 welder. This ArcCaptain welder has so much more versatility, adjustment, and power compared to the old basic transformer MIG welder I'm coming from. The build quality is excellent, although it may not be as durable as a big name brand, but for DIY hobby use in the garage it will be more than tough enough. The welder comes with almost everything you need to MIG or stick weld out of the box. The only items you'll need to pick up are your MIG wire, shielding gas (unless you run flux-core wire), a gas regulator, or your stick welding electrodes. The welder comes with extra MIG consumables and uses standard tweco style contact tips readily available. 3 different styles of wire drive rolls are provided; V-groove for solid wire, knurled groove for flux wire, and U-groove for aluminum wire. Unfortunately ArcCaptain appears to have a packaging issue though because even with 7 drive rolls included in the kit none of them have a groove sized for running 0.035" (0.9mm) wire of any type. Hopefully they correct this issue in the future. This welder welds nicely and creates an easy to control weld bead. I'm a little rusty with my handwork so the inconsistencies in my test welds were the result of my own travel speed issues and not the welder. The Synergistic MIG functionality is really nice and provides a really good starting point for MIG weld settings. The one thing that ArcCaptain completely fails to mention in their user manual though is that when your in Synergistic mode you MUST set the AMPERAGE level appropriate for the material thickness being welded and then the machine will adjust the voltage and wire feed speed accordingly. For any beginner, just follow this rule of thumb and use 1 Amp for ever 0.001" of material thickness (ex. for welding 1/8" thick steel start with the welder set to 125A in synergistic mode and adjust the voltage from there if the weld is too hot/cold for your liking). My only minor complaints about the welder, aside from the missing 0.035" drive rolls, are that ArcCaptain didn't include a MIG setup chart sticker inside the door cover (which is standard practice on all MIG machines), and that the unit comes wired for 110V input and they provide a 110V to 220V adapter cable. I think this practice of passing 220V through a 110V plug is poor design and may even be a violation of certain electrical safety codes. The better design would've been to have a 220V cable wired to the unit and adapt down to a 110V plug when needed. Overall this ArcCaptain MIG200 welder is a great value for all of the functionality it provides. It provides many more advanced features typically reserved for welders 2-3X the price of this unit. ArcCaptains support team has also been very helpful and responsive to my emails and the customer support is excellent for an international company. I'd highly recommend this welder to anyone looking for an excellent value multi-process MIG welder.
...
show more
Reviewed in the United States on April 12, 2023 by Kevin Kevin
Pattern Name: MIG Welder 130A
Bought this last year and finally got to use it (4/21/2024). The welder if fool proof, it will burn through thin metal so be aware. Not much to adjust manually which could be an issue. My advise watch some how-to welding videos to get some basic pointers, this is my second attempt at welding and it turned out fine, the machine is well made, well priced and weighs nothing. I dont plan on using this welder often because I currently do not have that many projects which require welding. Durability - Only time will tell. Yes I would recommend this Welder. Please note I Got nothing in return for this review from the ARCCAPTAIN.
...
show more
Reviewed in the United States on April 24, 2024 by Pete G. Pete G.
Pattern Name: MIG Welder 130A
This is a great welder for all your small projects. Nothing huge using it every day for eight hours and probably won’t get much life out of it. I use it about 23 times a week for about a month now time for just a few hours and it works great a friend of mine also bought one and was using it every day for about eight hours a day and went out on him pretty quickly For this price and the size for professional welder maybe not .
...
show more
Reviewed in the United States on May 11, 2024 by Bryan Berg
Pattern Name: MIG Welder 200A
I bought this 200-amp 6-in-1 ArcCaptain around 10 months ago, and I have been and continue to be very pleased with it. I bought it to replace a bottom-of-the-barrel multi-process unit, which was my first MIG machine; up to that time (25 years or so) I've welded only using stick or TIG. That little unit worked okay for basic MIG/flux core, but had some frustrations, including limited capacity and no way to see or set specific wire-feed and voltage - it only provided a "synergy" mode with an arbitrary +/- adjustment. Nonetheless, despite its limitations, that bottom-barrel convinced me that I did want to incorporate MIG into my welding capabilities. Thus, when I took on a major project for a friend (major for me, at least - completely refurbishing and adding onto a 4 x 8 trailer), I took advantage of the excuse to step up to the "next level," resulting in buying this ArcCaptain. I was specifically looking for a machine with decent capacity and the ability to switch to full-manual mode. I chose the ArcCaptain based on its described capabilities combined with some favorable YouTube reviews. Pros of this unit: * Welds very smoothly in MIG, flux-core, and SMAW, all on steel; I haven't tried it on TIG or spool gun. * Dual voltage - I mostly use it on 240V, but have needed to run it on 120V a few times, and it worked well (only tried on MIG thus far) * Easy to use interface, with clear readouts * Memory for up to 10 sets of settings * Ability to switch back and forth from "synergy" mode to full manual mode, allowing full control and fine-tuning of settings * "Spot weld" mode is surprisingly useful * Fan runs only on-demand; shuts off when it is not needed Cons of this unit: * The wire-feed setting is shown in meters/second rather than in inches/minute - the latter is the way I nearly always see it expressed, but that may be due to being in the USA. The conversion is not difficult - meters/second * 40 ≈ inches/minute. * The plastic strain-relief where the wire-feed gun plugs into the unit is a bit flimsy I have no affiliation with the company, and purchased the unit with my own money. Bottom line: I have been very, very satisfied with this welder, and would not hesitate to buy it again.
...
show more
Reviewed in the United States on May 3, 2024 by Andrew Wakefield