Enclosure for Bambu Lab AMS Lite Multi-Color 3D Printing System Fully Sealed Filament Storage With Drying Box Allow Vertical Placement(4 Hygrometers Included)(Enclosure Only Excluding AMS Lite)
Condition: New
Buy Now, Pay Later
As low as
$12.50
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Wednesday, Apr 29
Recently Viewed
Style: Enclosure
Features
- Friendly RemindersThis product does not include the AMS Lite or Feeder Motor. AMS Lite and Feeder Motor need to be purchased separately from Bambulab. The AMS Lite enclosure is only compatible with AMS Lite.
- Superior Filament Protection & DryingFeatures four independent, sealed, and dustproof compartments for optimal filament storage. Each compartment allows for easy desiccant replacement, ensuring isolated humidity control for perfectly dry filament every time.
- Individualized Humidity MonitoringMonitor exact conditions with dedicated hygrometers and thermometers in each of the four compartments. Get real-time data on humidity and temperature, giving you precise control over your filament's environment.
- Space-SavingReclaim valuable desk space! Our innovative upper and lower stands enable vertical placement of your Bambu Lab AMS Lite, reducing its footprint by half. Meanwhile, it can still be mounted on top of a printer (requires printing our redesigned top mount from MakerWorld).
- Seamless Filament SwapsNo more struggling in cramped setups. Our dual-purpose central latch functions as a specialized pry bar, allowing for quick and easy spool changes in seconds. Efficiency meets intelligent engineering.
- Sleek Design & Easy MonitoringThe transparent upper cover allows for instant, clear observation of filament colors and remaining filament within your AMS Lite. Its minimalist design, featuring a white base and orange connectors, offers a clean, attractive look and a precise, custom fit achieved through 3D scanning. AMS Lite Enclosure can be perfectly installed without the need to disassemble the AMS Lite.
- Maintain Optimal Filament DrynessDesiccant is a consumable, and its effectiveness varies by environment. Regularly monitor the humidity in each storage area via the hygrometers and replace the desiccant promptly (e.g., 20g silica gel desiccant) to maintain ideal conditions, ensuring consistent print quality and optimal 3D printing results.
Description
AMS Lite is an excellent Multi-Color 3D Printing System, but its positioning means it lacks sealing of filament, and using damp filament will result in reduced print quality. So we developed a sealing box specifically for AMS Lite, which allows AMS Lite to be used like AMS Pro.Make "Lite" like "Pro". Four independent, dust-proof and sealed compartments. Through sophisticated design, the desiccant in each 3D printing filament compartment can be replaced independently, ensuring the four 3D printing filament storage environments do not affect each other. Each compartment is also equipped with a hygrometer and thermometer for independent monitoring of humidity and temperature conditions. All product components are injection-molded using a 200-ton machine, providing increased strength and durability for long-term use. The cleverly designed upper and lower stands allow AMS Lite to be placed vertically, reducing its floor space by half and further saving your desk space.
Brand: Howarx
Item model number: K006A
Item Weight: 4 pounds
Product Dimensions: 19.5 x 9 x 9.5 inches
Item Dimensions LxWxH: 19.5 x 9 x 9.5 inches
Manufacturer: Howarx
Language: English
Date First Available: August 26, 2025
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Wednesday, Apr 29
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: Enclosure
Being an owner of a BAMBU LAB A1 printer (btw great beginner printer) with the AMS Lite, I have always wanted to print my own AMS Lite enclosure from the MakerWorld site to gain some filament moisture absorption control and to leave my filament out longer between projects. I saw this enclosure for sale and online and thought I would give it try versus the time and filament needed to make one and the potential fitment issues. Assembly was pretty straight forward (directions illustrated well), and I too had some difficulty getting the orange clips that hold the clear covers installed to the clear covers. I took some time and slightly heated the clip portions that snap into the covers with a hair dryer and got them all installed. The rest of the installation was fine. I found having the parts injection molded worked well for fitment and stiffness. The same may be achieved with a similar printed version with material filament choices, but the injected molded parts, to me, would seem to be superior in that respect and successfully getting the gaskets implemented could be challenging if one were to print an enclosure. Having the gaskets is key to keeping the moisture out. In practice and in use, it takes some practice to load filament spools in and out of the AMS Lite with the new enclosure installed as the filament has to be started into the feeder with the spool off the AMS Lite spool holder and then installed to the holder (you have to be quick) due to limited room inside. In the room we have the printer in the humidity is typically 48% to 61% RH. With the desiccants installed and the enclosure sealed up I was seeing hygrometers readings in about 1-1.5 days of around 23% to 27% on avg that were consistent. I have not had it long enough to have a good idea how long the desiccants last. I believe you should dry your filament first via a dryer and then this would be good for maintaining filament for projects and extended periods of time for peace of mind. I am happy with my purchase and the product, as I was looking for more of a turn-key assembly in my case. Some things I would like to see different or would change would be the following: 1) Change the shape of the white bodies to be straight at the bottom near the desiccant holders instead of following the curve of the spools to allow for more finger room to access and load spool filament and remove filament and spools without fear of the filament spring out about the spool upon removal (I get it this would make the for more mirrored left and right parts and increase cost) -OR- Make a thin bracket with the inboard features of the desiccant holders so it could snap in to hold the middle of the enclosure together which would stay in place (like what the desiccant holders do now) and have the remaining space so the desiccant holders (little bit shallower) could slide in and out. This would allow for plenty of room for loading and removing filament and filament spools and then you simply install the desiccant holders into place after spool installation. 2) Sell replacement parts for the unit like the clips that hold the clear covers on, desiccant holders, and/or especially the rubber grommets where the filament leaves the enclosure and enters the AMS Lite feeder. They do include an extra set of grommets in the kit, which is good, but they too, will not last forever. So, being able to buy parts would be great to me as we are a community of makers and tinkerers that like to modify things to suite our needs. I am thinking if I had another set of desiccant holders, I could mod the ones that came with the enclosure to do what I was thinking in point "1" perhaps, but this is not a deal breaker. I applaud and appreciate the company for what they have designed (polished and finished) and made for users like me, there is always room for small updates. I have my AMS Lite on the Bambu Lab Y stand (traditional way), so I have not tried the optional vertical placement with the included support feet but will try it later to get more room. So, in a nutshell, I really think this enclosure makes a difference with the moisture as I believe I can leave my filament installed longer than normal without worry between and during projects and I do appreciate having individual spool covers that are clear to see the filament levels, and I like the gasket joints. I will update my review over time, if needed. Thanks!
...
show more
Reviewed in the United States on November 29, 2025 by CCR
Style: Enclosure
Overall it works, I have no other choice! Because I bought the A1 combo, it comes with AMS Lite, but I often use PETG to print things. AMS Lite is very unfriendly to filaments. The exposed environment will not only collect dust but also make the filaments damp, so I saw this sealing box. Disadvantages: 1. There are actually a lot of things to note during the installation process. For example, the drying box is used to connect and fix the lower cover. If you do not align the two lower covers strictly, it will make it difficult to fix the drying box in place. And press the drying box to the middle. If you press the grilles on both sides, this will cause the grilles to break because they are not stressed; 2. Before purchasing, I read reviews saying that it is difficult to remove spools, and that is indeed the case! But I asked the official and they sent me a link to print a customized crowbar on Makerworld, which solved the problem. Here are the product benefits: 1. The product matches AMS Lite very well, and the key parts, such as the rollers, fit perfectly; 2. The sealing performance is also good, and the humidity can be maintained at about 30% by adding desiccant; 3. Because I broke the grille, I contacted the manufacturer and immediately sent me free replacement parts. They also told me about the top-mounted solution (I found this really saves space). I was very satisfied with the communication and handling with the manufacturer. Overall: The product has achieved the function of sealing filaments, and the quality is very good. The customer service handled it quickly and the results were satisfactory. However, the installation steps and usage details of the product still have the potential to be optimized. I hope the manufacturer can continue to improve.
...
show more
Reviewed in the United States on March 6, 2026 by Leo
Style: Enclosure
Legit piece of junk. Pieces are near impossible to put together without breaking. Cheap plastic. It's almost like the parts weren't measured when making them as it is waaay too tight. Can't even push these silica had holders in its too tight fitting.
Reviewed in the United States on February 27, 2026 by Leo
Style: Enclosure
I bought this to keep the humidity down for my 3d printer and I must say it does its job perfectly! It fits perfectly with my 3d printer and was easy to install. It’s a good value compared to others I’ve seen out there ! It’s helped my prints out tremendously
Reviewed in the United States on April 2, 2026 by Southern Sweet Heart Vinyl
Style: Enclosure
Everything is awesome but putting filament in sucks, also the way you have to use humidity packs also sucks
Reviewed in the United States on December 7, 2025 by R.S.V.
Style: Enclosure
My son has been asking for one of these for awhile. This one looked great and was in our price range, everything 3d print adds up! But getting the enclosure for filament saves not only money in the long run protecting filament from elements, but it saves the headache from failed prints due to humidity issues. Easy to set up and use!
...
show more
Reviewed in the United States on March 21, 2026 by Starla
Style: Enclosure
I would not buy this again. It is a pain to assemble and use. Very hard to load filament. The worst thing is that you cannot easily see what color/type filament is in each chamber. I am baffled as to why they didn't make this enclosure clear. The design also makes top mounting of the AMS lite problematic. The Bambu Lab Top Mount bracket will not work with this enclosure. These are only a few reasons I regret this purchase. There is only one thing I can commend it for and that is keeping filament dry. For that one thing, it seems to do a good job. Print the enclosure available on Maker World and leave this thing on Amazon. You can thank me later.
...
show more
Reviewed in the United States on February 15, 2026 by S. G. Harp