Armor SX5000 WB Natural-Look Penetrating Water-Based Silane Siloxane Concrete Sealer for Concrete, Brick, Pavers, and Natural Stone - 5 Gallon

Features

• PROFESSIONAL GRADE SILANE SILOXANE SEALER: The Armor SX5000 WB is a professional-grade water-based silane siloxane sealer designed for use on unsealed concrete, brick, paver, bluestone, flagstone, slate, natural stone, and masonry.
• REDUCES WATER ABSROPTION BY UP TO 95%: The Armor SX5000 WB chemically reacts to form a water-repellent barrier below the surface that will reduce the absorption of water and other liquids by up to 95%.
• WONT CHANGE THE LOOK OR COLOR: Formulated with high-quality US-manufactured resins, the Armor SX5000 WB is designed to protect concrete, brick, pavers, stone, and masonry without changing the look, color, or feel. The substrate will look and feel exactly as it did before it was sealed!
• LONG LASTING PROTECTION: The Armor SX5000 WB Silane-Siloxane concrete sealer chemically reacts to form a water-repellent barrier below the surface that can last for up to 7-10 years. By reducing the absorption of water through the surface, damage caused by water absorption is also reduced. Sealed surfaces are more resistant to cracking, spalling, ice damage, salt damage, organic surface growth, and staining.
• READY TO USE: The Armor SX5000 WB is ready-to-use and can be applied to a properly cleaned and prepped unsealed surface with pump sprayer. One gallon covers up to 175-225 square feet per gallon. Foundation Armor cleaners and sprayers are available separately.
• EASY TO MAINTAIN: The Armor SX5000 WB works entirely below the surface so there is no surface film or coating to maintain. When it is time to reseal, simply apply 1-2 coats of the Armor SX5000 WB to a clean, dry, and absorbent surface with a pump sprayer.
• WATER BASED FORMULA: The Armor SX5000 WB is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water.
• EASY TO MAINTAIN: This water-based silane siloxane concrete sealer is easy to use and easy to maintain. When it is time to reseal, simply apply a single coat of the concrete sealer to a clean and dry surface with a pump sprayer.
• WATER BASED FORMULA: This silane siloxane concrete sealer is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water.

Description

For more than a decade, Foundation Armor has been manufacturing and distributing sealers and coatings to homeowners and contractors. Foundation Armor is a multi-generational family owned and operated business. Our brand very closely aligns with our values, and represents honesty, quality, and reliability. In every conversation, our priority is to provide our customers with the information they need to make the best purchasing decision for their project. Several Foundation Armor products won the Bob Vila Editors' Choice Award and Best Overall Award in 2024 and 2025! Foundation Armor manufactures products for enhancing, sealing, cleaning, and protecting concrete, stone, brick & pavers. Visit the Store Our PRO-Grade penetrating sealers are used to seal everything from driveways to bridge decks! Protect against water, snow, ice, salt! Visit the Store Our PRO-Grade wet look sealers will dramatically enhance and protect a variety of concrete and paver surfaces. Visit the Store Our PRO-Grade high gloss sealers are designed to enhance and protect concrete and paver surfaces with a lasting high gloss finish. Visit the Store Our PRO-Grade interior coatings are designed to enhance and protect concrete against oil, gas, and chemicals. Visit the Store Visit the Store Visit the Store The Armor SX5000 WB is a professional-grade penetrating water-based Silane-Siloxane sealer. It penetrates deep into the substrate where it chemically reacts to form a barrier within the pores that reduces surface water absorption by up to 95%. It will not change the look or color of the substrate, and it won't leave a visible surface film. The Armor SX5000 WB won the Editor's Choice Award in 2024 and 2025 for Best Concrete Sealers and Best Paver Sealers. The Armor SX5000 WB ships same-day Monday through Friday when placed before 4 PM EST. Orders placed on holidays or the weekend ship next business day. Foundation Armor is a multi-generational family owned and operated business. We take pride in providing the best products. Foundation Armor technicians are always available to answer any questions you may have. From research to application, we are here to help! The Armor SX5000 WB can easily be applied with a pump sprayer. Once fully cured, it can last for up to 7-10 years before the need to reseal! The Armor SX5000 WB works entirely below the surface. It won't leave a slippery or visible surface film, and it won't change the look or color. The Armor SX5000 WB is breathable and UV resistant. It will never yellow, peel, flake, or fade because it works entirely below the surface. The Armor SX5000 WB will reduce the absorption of surface water and other liquids by up to 95%, reducing damage caused by water absorption. The Armor SX5000 WB reduces the absorption of water and other liquids by up to 95%. It helps keep liquids closer to the surface for easier cleaning. The Armor SX5000 WB will reduce damage caused by water absorption from the use of de-icing salts. The Armor SX5000 WB will reduce organic growths on the surface. The Armor SX5000 WB will reduce damage caused by freeze-thaw cycles and water absorption such as cracking, spalling, and pitting. The Armor SX5000 WB is a great penetrating sealer for unsealed roadways, bridges, parking lots, and parking garages! The Armor SX5000 WB is a great penetrating sealer for unsealed concrete, brick, paver, and natural stone driveways. The Armor SX5000 WB is a great penetrating sealer for unsealed concrete, brick, paver, and natural stone patios and pool decks. The Armor SX5000 WB is a great penetrating sealer for unsealed concrete, brick, paver, and natural stone sidewalks and walkways. Coverage: Porous Surfaces: Up to 175 FT2/gallon in one coat. Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance. Less porous surfaces, such as bluestone, flagstone, and slate, may only require one coat. Surface Preparation: The Armor SX5000 WB should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. If a cleaner is used, it is important to make sure that all cleaning residue has been removed and that the PH of the surface has not been altered to avoid the formation of dark spots. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor SX5000 WB to a test area to verify absorption, coverage, compatibility, and project suitability. The Armor SX5000 WB is designed specifically for unsealed concrete and masonry surfaces. Do not apply this product over a surface recently sealed with a penetrating sealer, or previously sealed with a film-forming sealer or coating. The Armor SX5000 WB can be applied over surfaces treated with a Silicate sealer so long as it has been at least 7 days. It can also be re-applied to a surface previously treated with a Silane-Siloxane sealer so long as it has been a few years, and the surface is able to quickly and easily absorb water. Application: A commercial pump sprayer is recommended to achieve the best coverage and results. Be sure the psi is no greater than 20. Use a .3-.5 GPM adjustable cone tip. Sprayer Suggestion: Armor Industrial Sprayer, ASIN B0CDXT17PD. Apply the first coat of Armor SX5000 WB, ensuring the entire surface is evenly saturated. Wait at least 10-15 minutes, then apply the second coat. Do not flood the surface or allow puddles to form, this will result in over application and the formation of dark spots on the surface. Less porous surfaces, such as bluestone, flagstone, and slate, may only require one coat. Substrates sealed with Armor SX5000 WB may be coated with silicone emulsion paints and many oil based paints once the surface has had 72 hours to dry. Testing is always necessary and recommended to assure proper adhesion. Adhesion may be improved if the surface is pressure washed and allowed to dry prior to application. Armor SX5000 WB is not a paint primer. Adhesion of cementitious coatings, stucco, plaster, etc., may be adversely affected. These types of substrate treatments should be installed and allowed to fully cure before applying Armor SX5000 WB. Always test to verify compatibility. Time of Day: The temperature of the air and surface must be 55-85 degrees F during application. If freezing conditions exist prior to application, it is highly recommended that the substrate be allowed to fully thaw. Should this recommendation not be followed, the product may not yield adequate protective properties. Once applied, the surface should be kept dry for at least 24 hours. Clean-Up: Use warm water and soap. Dispose of containers in accordance with local and federal regulations. Technical Data and SDS Sheet: Prior to applying, please refer to the Technical Data Sheet and the Safety Data Sheet posted on the manufacturer's website. If you have questions before purchasing or applying, please don't hesitate to reach out to a Foundation Armor representative. Armor SX5000 WB Armor SX5000 Armor WL550 Armor AR350 Armor AR500 Armor WB25 Armor Sprayer

Material: Resin, Silicone

Brand: Foundation Armor

Style: Compact

Item Weight: 44 Pounds

Item dimensions L x W x H: 13 x 13 x 15 inches

Brand Name: Foundation Armor

UPC: 856994005145

Unit Count: 640.0 Fluid Ounces

Global Trade Identification Number: 45

Number of Items: 1

Part Number: SX5000WB5GAL

Model: SX5000WB5GALF

Manufacturer: Foundation Armor

Item Weight: 44 Pounds

Item Dimensions: 13 x 13 x 15 inches

Water Resistance Level: Water Repellent

Item Form: Liquid

Compatible Material: Acrylic, Concrete

Style Name: Compact

Color: Clear

Surface Recommendation: Concrete

Material Type: Resin, Silicone