zMAX 58-011 - Engine & Fuel Formula Kit - Easy to Use - Reduces Carbon Build-Up & Lubricates Metal Extending Life of Car or Truck - Runs Efficiently, Improving Gas or Diesel Mileage - 12 oz - 2 Pack
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$12.50
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Thursday, Jun 5
Size: Engine & Fuel - 2 Pack
Features
- Extend the Life Of Your Vehicle: zMAX Engine & Fuel formulas are easy to use. Micro-lubrication soaks into metal surfaces, which improves lubricity and reduces carbon deposit build-up while boosting performance and protecting vital vehicle parts.
- Engine Efficiency: Add zMAX Engine Formula to gain efficient combustion resulting in more power. Use at your routine oil change or every 6k miles for reduced engine wear, lower emissions and keep your engine running smoothly.
- Fuel Conditioner: Pour zMAX Fuel Formula in the fuel tank to lubricate and maintain a clean fuel injector system. It conditions the pumps and nozzles reducing carbon residue from the valves and pistons while improving fuel efficiency and performance.
- Trusted by Professionals & Dealerships: Stock zMAX in your garage to care for your car like a professional. From local repair shop mechanics to major car dealership groups, our formula is mechanic trusted. zMAX is USA-Made.
- Reputable Craftsmanship and Performance: zMAX is proud to be the Official Micro-lubricant of Speedway Motorsports. Trusted for over 80 years, zMAX helps cut costs at the pump and extends your engines life.
Manufacturer: zMAX
Brand: zMAX
Item Weight: 3.34 pounds
Product Dimensions: 13.75 x 3.5 x 8.25 inches
Country of Origin: USA
Manufacturer Part Number: 58-011
Date First Available: June 12, 2020
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Thursday, Jun 5
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: Engine - Single
zMAX Engineers Provide Insight solutions to common automotive issues like oil usage or burning, hard starting, poor fuel mileage, better performance, reduced emissions and just about everything else short of curing baldness. And they often come with testimonials from well-respected automotive personalities so they must be legit, right? To the average Joe who doesn’t even know what oil is in his car, that could be the conclusion. zMAX has conducted numerous tests on its products with results and explanations available on its website. However, astute engine builders know that that racing hero may often be nothing more than a paid monkey who gets big sponsorship dollars but in his heart knows he’s pitching snake oil. At a small industry event about 20 years ago, Smokey Yunick all but said as much, and the chuckling and outright guttural laughter amongst the journalists and engineers in the room made the uncomfortable squirming of the advertiser’s marketing guys just that much funnier. zMAX Micro-lubricant is sometimes lumped into this category of unsubstantiated miracle solutions, quite likely due to its high-profile advertising campaigns that make bold and confident claims. However, unlike many other lubrication formulas or so-called additives, zMAX has a history founded in science and a rather extensive resume of lab tests that prompts EngineLabs to ask even more questions. We’d see a 5-horsepower increase after three days of hot-cold run cycles.–Ed Rachanski Jr, zMAX The story somewhat starts in the era of Enrico Fermi, an Italian physicist and key player in the Manhattan Project that developed the first nuclear weapons during WWII. Some of the Manhattan Project’s development work took place at the University of Chicago (UC), near where Joe Lencki grew up. A lifelong hot rodder and self-taught engineer, as well as future engine designer and Indy Car builder, Lencki did some mechanical work on the side for UC scientists, becoming friends with Fermi along the way. Fermi, as a side project to his day job of controlling nuclear reactions, developed an additive to reduce friction in internal combustion engines. Some could say it was to help the military aircraft that would eventually carry the bomb. Through their friendship, Fermi knew Lencki was into racing and engine building, so when the Manhattan Project got to the point of dominating all of his time, Fermi gave Lencki his secret additive formula for his own use. Lencki was also sent to the South Pacific island of Tinian to oversee the maintenance on the B-29 Superfortress engines in the planes that conducted the war-ending missions over Japan. That’s A.J. Foyt on the left with Joe Lencki. Foyt was an early adopter of Lencki’s Speedway Cocktail. Lencki utilized the formula in his race engines at Indy and also in a “Speedway Cocktail” that some other racing friends were allowed to use. He called the additive Lenkite. It was designed to improve wear, particularly on cold-starts, in his Lencki-6 Indy engines, which were stretched versions of the Offenhauser 4-cylinder. With his history in the aircraft industry, Lencki also received FAA approval for his Lenkite based on rigorous in-field testing that showed significant wear reduction in airplane and helicopter engines. Now marketed under the zMAX name by Oil-Chem Research Corp. in Charlotte, NC (a subsidiary of Bruton Smith’s Speedway Motorsports Inc.), the formula still remains proprietary. However, officials say it does not contain Teflon, graphite or similar substances. It starts as highly refined mineral oil, not a synthetic, and the molecular structure is further refined to create what zMAX calls a “micro-lubricant.” Here’s where the lines between marketing claims and technical facts are sometimes hazy. zMAX officials are quick to point out, as Lencki did, that zMax does not treat the oil, it treats the metal. The engine oil is nothing more than a delivery vehicle to carry the zMAX formula to the engine’s metallic parts. zMAX is a “micro lubricant” designed to penetrate into smaller openings in the metal that conventional oils can’t. ‘Soak-in’ period needed With this strategy, zMAX can be used in petroleum or synthetic oils. Once the formula reaches the metal, zMAX officials say it works by penetrating into the metal to protect it from scuffing (and therefore wear). That action is also said to disperse varnish, carbon and other deposits. The objective, according to zMAX, is that nothing will stick to the metal once it’s treated. This is most beneficial on cylinder walls, pistons and rings, valves and guides, camshafts and lifters, bearings and pretty much anything that sees metal-to-metal contact. zMAX stays with the metal once the oil drains back, but not forever—eventually, its effects will diminish and replenishing the oil system is needed (every 50 hours as in the case of aircraft engines), according to the company. zMAX says a “soak in” period is required to penetrate into the metal. The formula works best when the parts are warm or up to operating temperature, which helps open the metal’s pores. Also, the more porous the metal the deeper the penetration; in other words, aluminum rods and pistons will soak up zMAX quicker than a crankshaft or cylinder wall. zMAX has been referred to as oil you can’t wipe off, no matter how hard you try. The formula’s benefit’s echo those boasted for numerous other products: reduced wear on vital parts; better dependability and longer engine life, improved fuel efficiency, lower emissions and restored performance. In addition, zMAX claims it cleans and lubes fuel pumps and injectors, conditions the combustion chambers and helps remove varnish and deposits from valves, pistons and other surfaces, as well as preventing grime from coming backzMAX, a commercialized metal interface treatment, is a uniquely processed mineral oil that has demonstrated its ability to improve fuel economy, reduce engine deposits, and reduce wear through the process of micro-lubrication. This micro-lubrication improves performance by reducing engine friction, affording an attendant improvement in fuel economy, and reducing engine wear and deposits in critical high temperature sealing areas. Because this unique mineral oil is able to both adsorb onto and absorb (penetrate) into the pores, cracks, and fissures in the engine’s metallurgy, a new mechanism of micro-lubrication is offered for improving the overall lubrication and performance in automotive engines. zMAX is derived from a highly refined mineral oil that undergoes a proprietary process involving specific molecular rearrangement, and has a kinematic viscosity of 11.5 cSt @ 40 °C and 3.00 cSt @ 100 ° C, an ASTM color of 30+, a Surface Tension of 27.75 dynes/cm @ 20°C, and an API gravity of 36.6. A comparison of ASTM D2887 distillation results of zMAX versus the mineral oil used in its production shows zMAX having a slightly higher boiling range than mineral oil. Chemical analyses using gas chromatography and mass spectroscopy conducted by Triton Analytics Corporation (Houston, TX) revealed a greater concentration of linear hydrocarbon chains in zMAX than in mineral oil. Since zMAX is added to the engine oil, a misconception may exist that zMAX is an additive for engine oils. This is incorrect as the SAE J357 OCT 99 Information Report Physical and Chemical Properties of Engine Oils provides this definition “A lubricant additive agent is a material designed to enhance the performance properties of the base stock or to improve the base stock properties that do not naturally exist with the base stock.” Clearly, zMAX does neither of these two functions, as it is not designed to improve or enhance any qualities of the engine oil. Introducing it into the engine oil is merely the means to transport zMAX directly to the engine’s metallurgy. The following contains a compilation of essentially all testing programs supporting those performance claims mentioned above. They are organized into nine sections with a summary for each section given below. The detailed individual reports can be made available upon request. Inactivity towards Additives - Since zMAX may be mistaken as being an additive, laboratory testing to show its non-reactivity when mixed with formulated engine oils would confirm zMAX does not interact/interfere with those additive ingredients in engine oils. The approach taken was to have selected laboratory tests conducted back-to-back first on a fully formulated SAE 5w-30 SJ engine oil without the zMAX followed those same tests on a blend of that oil containing 10% by volume zMAX. Any significant changes in test results would certainly demonstrate some reaction had occurred whereas no change would show zMAX to be “inert” towards the engine oil’s additives. The laboratory tests selected were those that should reveal any sensitivity to additive interactions or incompatibility. These first eight tests were: ASTM D664 (Total Acid Number), ASTM D2896 (Total Base Number), ASTM D4742 (Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake), ASTM D130 (Copper Strip Corrosion), FTM Standard 791C Method 3470 (Homogeneity and Miscibility), General Motors 9099P (Engine Oil Filterability Test), ASTM D892 (Foaming Characteristics of Engine Oils), and ASTM D6082 (High Temperature Foaming Characteristics of Engine Oils). The remaining three tests dealt with viscosity and were selected to merely assess the degree of change since adding 10% zMAX would slightly lower the overall viscosity. These remaining tests were: ASTM D5133 (Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oil Using a Temperature Scanning Technique), ASTM D445 (Kinematic Viscosity), and ASTM D5293 (Apparent Viscosity of Engine Oil Using the Cold Cranking Simulator). The results of these first eight tests revealed zMAX did not generate any significant changes that would have indicated any additive interaction or some additive/base stock incompatibility. All of the changes shown were either within the precision limits for the individual tests or in some instances there was no change whatsoever. However, the results obtained from the Homogeneity and Miscibility (H&M) test warrant further comment. This test determines whether fully formulated engine oils are homogeneous and completely miscible with other engines oils they might encounter in service. The presence of zMAX in the SAE 5w30 SJ oil when tested individually against the six reference oils required in the H&M test did not result in any indication of incompatibity being evidenced. The results of the remaining three tests (i.e., Gelation Index through the Cold Cranking Simulator) revealed minor changes reflecting the presence of the lighter (i.e., lower viscosity) zMAX component that was fully anticipated. In summary, the testing results revealed the absence of any additive interactions with zMAX. Should zMAX have reacted with the additive package or any of its individual ingredients, there would in all likelihood have been significant changes in all of the tests that were conducted. Metal Penetration - Arch Analytical Services (Cheshire, CT) utilized Auger Electron Spectroscopy to assess the ability of zMAX to penetrate metal surfaces. Tests were conducted on cast iron and aluminum alloy specimens similar in composition to metals used in the production of automotive engines. The metal specimens were immersed in the test fluids for seven to fourteen days under temperature-cycled conditions (i.e., ambient to 100 °C to simulate some modes of an operating engine environment). Comparative tests of zMAX by itself and in blends with a commercial SAE 5w30 SJ formulated engine oil showed the zMAX penetrated both types of metal far deeper than engine oil alone. Although it was not possible to precisely quantify the difference in penetration depths between zMAX and the engine oil, the order of magnitude difference was at least 100: 1. This ability to soak (i.e., be absorbed) into metal surfaces is the key to zMAX 's effectiveness. Carbon Reduction and Dispersion - A testing program conducted by Savant Inc. (Midland, MI) used the TEOST MHT-4 test procedure, a modification of ASTM D6335 to assess carbon deposit formation. This procedure is routinely used for measuring the ability of fully formulated engine oils to control high temperature deposits and resist oxidation. This test, a requirement for meeting current SAE/API and ILSAC engine oil performance standards, basically simulates deposit formation in the piston ring belt area of a modem engine by allowing oil to flow over a heated steel tube in an oxidizing atmosphere. Blends of zMAX and two different reference engine oils were made. Again, the metal specimens were exposed to the same preconditioning cycle described above. The two reference engine oils differed in their ability for controlling carbon deposits, one being a high deposit oil while the other being a low deposit oil. The results of these tests revealed a reduction in carbon deposits when zMAX was present, with reductions of 14.6% and 12.3% for the low and high deposit reference oils respectively. In an another laboratory study conducted by Oil-Chem Research Corporation (Bedford Park, IL), sludge from an engine oil pan was mixed with different fluids and heated to 100 °C with vertically hung strips of chromatography paper partially immersed in the sludge/fluid mixtures. Through capillary action, the fluids migrate up the paper. Depending upon the ability of the fluid to disperse the sludge components, the capillary action will transport different amounts and types of carbonaceous matter. Comparative testing of zMAX by itself and zMAX /oil blends versus engine oil, mineral oil, and several major aftermarket additives showed much larger amounts of carbon matter being transported when zMAX was present. This demonstrated the ability of zMAX to disperse engine deposits which was further confirmed in subsequent engine dynamometer testing. Friction and Wear Bench Tests - A series of ASTM bench tests which are used to assess the fundamental behavior of oils to control friction and wear between rubbing metal surfaces were conducted by Savant Inc. (Midland, MI). Six different test procedures which varied both in the mechanical configuration and applied loading were selected. Each procedure was slightly modified by the same preconditioning of metal specimens mentioned above. Multiple testing was conducted. The following compares test results of a commercial SAE 5w30 SJ engine oil without and with zMAX, the reduction in wear and coefficient of friction, or increase in time to failure being a direct result of zMAX. 1. ASTM D4172 Four Ball Wear Test 3 to 11% reduction in the wear scar diameter 2. ASTM D5183 Four Ball Wear and Coefficient of Friction Test 9 to 61 % reduction in the wear scar diameter 10 to 14% reduction in the coefficient of friction 3. ASTM G99 Pin-on-Disk Test Up to 2% reduction in the coefficient of friction 4. Savant Progressive Load Test 10 to 22% reduction in the coefficient of friction 29% less weight loss of the pin 5. ASTM D2714 Block-on Ring Test 4 to 13% reduction in the coefficient of friction 3 1 % reduction in specimen weight loss 16% reduction in wear scar diameter 6. ASTM D5620 Thin Film-on-Vee Block Test Up to 300% increase in time to failure All of these tests showed improvements in friction (i.e., lowering the coefficient of friction) and reduced wear when zMAX was present giving a strong indication that friction and wear would also be reduced in operating engines. Further, there were no incidents that the presence of zMAX caused any adverse or negative effect in any of these tests. Bench Rust Tests - Using the ASTM D1748 Rust Protection by Metal Preservatives in the Humidity Cabinet procedure, a series of aviation piston engine oils were evaluated by Phoenix Chemical Laboratory Inc. (Chicago, IL) for their ability to prevent the onset of rusting with and without zMAX. The procedure was modified by first incorporating the same preconditioning of metal specimens mentioned above. Using three commercial aviation piston engine oils, the time before the start of rusting was increased by 10 to 100 % when zMAX was present in the oil. These results demonstrate the ability of zMAX to provide enhanced surface protection from rusting. SAE J1321 Fuel Economy Tests - Four separate tests on the effectiveness of zMAX to improve fuel economy were conducted using in-use vehicles tested in accordance to the SAE J1321 Joint TMC/SAE Fuel Consumption Test procedure. In summary, the test protocol requires measuring the fuel consumption (by weight to improve accuracy) of a group of test and control vehicles by driving the vehicles over a fixed-length road course or test track at a fixed rate of speed. The test is conducted in two phases, a baseline phase before any changes are made to the vehicles, and a test phase in which the test vehicles receive a change. The difference in fuel consumption between the baseline and test phases is used to calculate the change in fuel economy. In this case, the test vehicles received the zMAX treatment in the crankcase, transmission and fuel tank. The control vehicles remain constant between the baseline and test phases and are used in the calculations to correct for the influences of ambient weather conditions. A summary of the four tests follows. 1. Claude Travis Associates (Grand Rapids, MI) - This test was conducted on an on-road course with two 1994 Class 8 Trucks powered by Cummins N1 diesel engines. One vehicle received zMAX treatment in the fuel, crankcase and transmission while the other vehicle was unchanged between the base and test periods. The test results showed a fuel economy improvement of 2.61% for the test vehicle. 2. Automotive Testing & Development Services, Inc. (Ontario, CA) - This test was conducted with three test vehicles and two control vehicles at the Las Vegas Motor Speedway in June of 2000. A summary of the test results follows. Vehicle % MPG Improvement 1992 Plymouth Acclaim, 2.5L 6.4 to 7.7% 1999 Chevrolet Malibu, 3.1L 8.8 to 9.5% 1995 Ford F-150, 5.0L ~0.1% 3. Automotive Testing & Development Services, Inc. (Ontario, CA) - This test was conducted with seven test vehicles and one control vehicle at the Las Vegas Motor Speedway in May of 2001. A summary of the test results follows. Vehicle % MPG Improvement 1996 Kia Sephia 4.6 1996 Ford Escort Wagon 3.3 1996 Ford Taurus 6.6 1989 Ford Crown Victoria 3.6 1995 Ford F-150 P/U 0.2 1997 Chevrolet Lumina 4.7 1995 Chevrolet Astro Van 2.5 Average % Improvement - 3.6 4. Gerald H. Keller, Consultant (Palos Heights, IL) - This test was conducted with eight test vehicles and one control vehicle at the Chicago Motor Speedway in June of 2001. A summary of test results follows. Vehicle % MPG Improvement 1991 Mazda, 2.2L 12.7 1988 Toyota Corolla, 1.6L 2.4 1986 Chrysler LeBaron, 2.2L 14.9 1994 Oldsmobile Cutlass, 3.4L 2.8 1991 Mercury Cougar, 3.8L 2.6 1989 Toyota Camry, 2.0L 4.8 1985 Dodge Van, 225 CID 0.9 1990 Chevrolet Beretta; 3.1L 3.1 Average % Improvement - 5.5 These test results show a wide range in the change of fuel economy due to zMAX. Since all of these vehicles had seen a relatively high level of road use (odometers ranged from 43 to 226,000 miles), the engines had accumulated carbon in the critical sealing areas. Thus, the ability of zMAX to penetrate the metal surfaces and improve engine sealing resulted in improved engine efficiency. A statistical analysis of the data generated from the SAE J3121 fuel economy tests conducted by Automotive Testing & Development Services, Inc in June 2000 and May 2001, and the Chicago test conducted by Gerald Keller in June 2001 was performed. The method used in this analysis involved the “Dependent Samples t-Test” methodology and is widely used where the significance of an observed change in two populations of data is to be measured. Applying this methodology, each of the three SAE J3121 fuel economy tests conducted on zMAX afforded statistically valid improvements in fuel economy. Vehicle Emissions Tests - Two vehicular emission test programs have conducted with zMAX and are described below. 1. Automotive Testing & Development Services, Inc. (Ontario, CA) - This test program employed five vehicles that were obtained from a rental agency. The vehicles were a 1996 Ford Escort, 1989 Ford Crown Victoria, 1995 Ford F-150 P/U, 1997 Chevrolet Lumina, and a 1995 Chevrolet Astro Van. After inspection and lubricant changes, the vehicles were base-lined for their emissions levels using the FTP 40 CFR-86 procedure. After a second lubricant change, the vehicles were treated with zMAX and the emissions tests were repeated. At this point the vehicles were returned to the rental agency and allowed to accumulate mileage for a thirty-day period at which point the vehicles were emissions tested again. This cycle was repeated for an additional thirty-day period affording sixty days of road use. The average results of these emissions tests are summarized in the following table. % Reduction HC CO NOx After 30 days of road use -9.7% -15.3% -9.7% After 60 days of road use -4.8% -4.8% -8.3% The reductions in all three pollutants is a significant event and is attributed to the action of the zMAX in cleaning carbon from the engine’s critical sealing areas and parts of the emission control system such as the oxygen sensor. 2. Gerald H. Keller, Consultant (Palos Heights, IL) - These tests were conducted on the same vehicles as used in the SAE J1321 fuel economy tests (June 2001) using the BAR 90 procedure. This is the procedure recommended by EPA for state emission surveillance purposes. The eight test vehicles were tested for their emissions at the start and end of the fuel economy testing which represented about 1,500 miles accumulated after adding zMAX. The average change in HC and CO levels are shown below. The NOx data is not considered since the BAR 90 procedure does not apply load to the vehicle, and thus NOx data has little significance for on-road emissions levels. % Reduction HC emissions @ idle -42.2% HC emissions @ 2500 rpm -76.0% CO emissions @ idle -52.9% CO emissions @ 2500 rpm -52.2% Engine Dynamometer Testing -A variety of different stationary engine dynamometer tests have been conducted on zMAX providing information on fuel economy, power, wear, blow-by, and deposits. These tests are summarized below. CLR Engine Testing - The CLR engine is a single cylinder carbureted engine which develops peak power output of 16.5 hp @ 3000 rpm. This engine has been used for many years in petroleum product research and development activities to assess the influence of new product formulations on engine performance. The engine is currently used by the petroleum industry for qualification to SAE/API/ILSAC engine oil standards. Although this single cylinder engine is used primarily for measuring bearing weight loss and shear stability of multigraded oils, it nonetheless is an excellent laboratory engine capable of providing additional engine performance measurements (e.g., fuel consumption, horsepower, etc.) as evidenced by the large number of technical papers in the literature citing the use of this engine. Ten (10) different evaluations of zMAX have been conducted with this engine. Each evaluation consisted of two tests, a baseline test on an engine oil without zMAX followed by a second test where the same oil and fuel were treated with zMAX. The tests used a modification of standard industry protocols, the L-38 (ASTM D5119) and the Sequence VIII (ASTM D6709). The major modification was to introduce an engine- preconditioning phase in the procedure for initially allowing zMAX to be absorbed. This modification, a ten hour preconditioning period, was used on both the baseline and zMAX tests to insure both tests were being conducted identically. The results of these tests, which were conducted by Auto Research Labs, Inc. (Chicago, IL) and later by the Oil-Chem Research Corporation (Bedford Park, IL), are as follows. a. SAE 50 Aircraft Piston Engine Oil + 5% zMAX and 12 oz. zMAX in the fuel (modified L-38 test procedure) 8.3% increase in power 8.5% improvement in fuel efficiency (bsfc) 17.0% reduction in blow-by Piston skirt wear reduced from 9.5% to 3.5% Intake valve stem wear reduced from 18% to7% Exhaust valve stem wear reduced from 3% to 1% Intake valve deposits reduced from 5% to 2% Exhaust valve deposits reduced from 3% to 1% b. Pennzoil SAE l0w30 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure) 7.6% increase in power 6.6% improvement in fuel efficiency (bsfc) 4.3% reduction in blow-by 69% reduction in exhaust valve guide wear Increase in top ring gap reduced from.0001 to 0.0 inches Used oil wear metals reduced by over 50% Fewer deposits on piston lands, grooves and skirts c. MotorCraft SAE 5w20 SJ + 5.0% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure) 3.8% increase in power 2.8% improvement in fuel efficiency (bsfc) 69% reduction in exhaust valve guide wear Increase in second ring gap reduced from 0.0002 to 0.0001 inches Used oil wear metals reduced by over 50% Fewer deposits on piston lands, grooves and skirts d. MotorCraft SAE 5w20 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure) 5.2% increase in power 4.2% improvement in fuel efficiency (bsfc) 3.5% reduction in blow-by 57% reduction in exhaust valve guide wear Increase in top ring gap reduced from 0.0001 to 0.0 in. Used oil wear metals reduced by over 50% Less deposits on piston lands, grooves and skirts e. MotorCraft SAE 5w20 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII procedure). In this test, the baseline phase was run as usual. Then, instead of reassembling the engine with new parts and engine cleaning as was done in the previous four tests, the engine was measured and reassembled with the used parts from the baseline phase. 7.0% increase in power 6.6% improvement in fuel efficiency (bsfc) 0.2% reduction in blow-by 92% reduction in exhaust valve guide wear Used oil wear metals reduced by over 50% A statistical analysis of the data generated from the CLR/ Sequence VIII engine testing conducted on the above four tests (i.e., numbers 1b through 1e) was performed to assess the individual hourly horsepower and fuel efficiency readings. The method used in this analysis involved the “Dependent Samples t- Test” methodology and is widely used where the significance of an observed change in two populations of data is to be measured. Applying this methodology on each of the four engine tests run on zMAX at different concentrations and with different oils has shown the changes in horsepower (bhp) and fuel efficiency (bsfc) were statistically different at a 99% confidence level. This analysis provided evidence that the observed improvements in these parameters were real and not simply due to test variability. f. Mobil 1 SAE 10w30 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure) 7.2% increase in power 6.6% improvement in fuel efficiency (bsfc) 17.4% reduction in blow-by 10.8% reduction in bearing weight loss 18.1% reduction in ring weight loss g. Mobil 1 SAE 10w30 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure) repeat of the above test to demonstrate repeatability of method. 6.5% increase in power 5.8% improvement in fuel efficiency (bsfc) 30.1% reduction in blow-by 25.3% reduction in bearing weight loss 52.1% reduction in ring weight loss h. Amsoil SAE 10w30 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure). 2.5% increase in power 2.4% improvement in fuel efficiency (bsfc) 12.1% reduction in blow-by 94% reduction in valve guide bore wear 37.3% reduction in bearing weight loss 12.1% reduction in ring weight loss i. Pennzoil SAE 5w30 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure). 4.4% increase in power 4.3% improvement in fuel efficiency (bsfc) 7.5% reduction in blow-by 16.7% reduction in bearing weight loss 58.0% reduction in ring weight loss 97% reduction in valve guide bore wear j. Pennzoil SAE 5w30 SJ + 8.5% zMAX and 12 oz. zMAX in the fuel (modified Sequence VIII test procedure) repeat of the above test conducted approximately one year later. 4.1% increase in power 3.9% improvement in fuel efficiency (bsfc) 3.8% reduction in blow-by 32.7% reduction in bearing weight loss Ford 2.0L Engine test - For this test, a new (1,000 miles) Ford 2.0L engine from a 2000 Ford Escort was mounted on an engine dynamometer testing stand at Oil-Chem Research Corporation, fully equipped for engine parameter control and continuous data monitoring. The test procedure consisted of running the engine at conditions which simulated 65 mph (2500 rpm and 26.0 hp load). The fuel rate was allowed to float to what ever level the engine's power control module would dictate. The engine was first base-lined on Pennzoil SAE 5w30 SJ oil for 14 hours with the power output controlled to 26.0 hp. Without changing the oil, the crankcase and fuel were treated with 12 oz. of zMAX. The engine was then run for a preconditioning phase consisting of one hour run periods followed by 5 to 12 hours soak periods. After ten run/soak cycles, the engine
...
show more
Reviewed in the United States on June 11, 2016 by Joshua W.
Size: Engine & Fuel - 2 Pack
This oil additive seems to smooth out the engine and it runs very well.
Reviewed in the United States on March 7, 2025 by phillip myers
Size: Engine & Fuel - Single
Z Max works and I’m not Lying
Reviewed in the United States on April 4, 2025 by larry ankeny
Size: Engine & Fuel - Single
Best product automotive needs. Been using since 1988 with great success.
Reviewed in the United States on March 23, 2025 by James LaCrosse
Size: Engine & Fuel - Single
Saved 2 engines with 1 bottle. Obviously not the first time I have used this product. Saw this my first time years ago on 2 guys garage or another show like it. At the time I was into high pro diesels. My 305 was not long for life, anyone with an ear heard the smack of the lifters as if I was low on oil. Everyone thought I re-built or replaced my engine. If you know anything about engines, yes, lifters and valves will shellac or develop carbon build up as will your carb or injection system. If you are using additives to your fuel and oil it means you are using crappy oil and fuel. Additives designed to correct buildup to bad oil and fuel buildup that actually work tend to be very bad for your oil and fuel system, this product will never harm your system, does not treat your fuel or oil, it only dissolves and atomizes particles. I bought a lawnmower that would not start or run, pulled the plugs, worst fowled plugs ever seen, after cleaning them you would have said there was a major problem, replaced, engine had a knock that made you think a rod was going to come after you every time it hit. 10 min. knock was gone, lawnmower ran brand knew. Obviously a lot of product left over, treated a Kawasaki Mule that has been running like crap for a year, getting worse for 2 years. He was facing a $700 min charge and up to $2500. I unless you have parts coming out of the oil pan, I refuse to even entertain a rebuild of fuel or oil system before trying this. There are many of masking products available, this is a true correction product. If will at the very least let you know if the problem is engine or fuel at a much cheaper cost.
...
show more
Reviewed in the United States on April 15, 2018 by Penny
Size: Engine - Single
I purchased this product at Wal-Mart but thought I would review it here while I was entering other reviews. I decided to try this on a recently acquired vehicle, a 4-cylinder, 2015 Acura. While three years old, the car has only 17,000 miles and has the look/feel of a new car, including no discernible performance issues. Still, having read up on engine oil treatments, I concluded that Z Max at worst would be a waste of $17-$18 dollars and at best, might actually provide some additional protection for my "like new" baby. So, I followed the instructions, adding the Z Max to the crank case while the engine was already warm and then I drove for about 15 minutes. I cannot claim that I've noticed any change in engine smoothness or sound, as my vehicle was already running nicely. I would say that maybe...just maybe...it's a little smoother at start-up...but that could be wishful thinking. From a gas mileage standpoint, I so far have the impression that it had a very small but positive effect (a possible improvement of about 1 mpg in city driving). Like most of these products, the hope for extra protection motivates us to buy them, even though it would be hard to prove that one's engine would have not lasted just as long with our without the additive. Some individuals with older vehicles have reported noticeable reductions in engine noise or even better emission test results. I can't make such claims. I didn't expect anything miraculous but I wasn't disappointed. I doubt that I will use this product regularly but if there's even some truth to the claim that it is absorbed into metal on engine parts and gives some enhanced protection against wear, it's worth a try. I may use it once a year unless or until I find a better product.
...
show more
Reviewed in the United States on June 11, 2018 by EC
Size: Engine & Fuel - Single
Every car I put this in never had a problem.
Reviewed in the United States on March 15, 2025 by Chad A Brown
Size: Engine & Fuel - Single
I've used this product on my other car. It drove too 263,000 miles when I got sold it still ran.
Reviewed in the United States on March 31, 2025 by Michael Smith