Buy Now, Pay Later
As low as
$32.00
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Saturday, Sep 13
Features
- If you have runs in reverse when you use it, please check the detailed diagram and adjust the wiring by yourself, thank you.
- 10 ft (3.0 m) torch cable: Gun connector offers fast connections to the welding machine.
- For all aluminum alloys: Recommended wire diameters can be fed with the same drive roll and liner assembly.
- Please check carefully and ensure that your machine model is exactly the same as our matching model. It only fits the following models: Millermatic141/190/211, Millermatic180/140 (After #LH210051N), Multimatic200/215, Renegade180, Syncrowave210TIG (Retrofit kit 269044 and accessory kit 301254 required).
- Full travel mechanical trigger: Excellent feedback even through a welding glove.
Brand: YESWELDER
Specific Uses For Product: Residential Use
Power Source: hand-powered
Wattage: 50 milliamp_hours
Included Components: 10 FT Cable
Brand: YESWELDER
Specific Uses For Product: Residential Use
Power Source: hand-powered
Wattage: 50 milliamp_hours
Included Components: 10 FT Cable
Style: Fit select Miller welder
Item Length: 118.11 Inches
Head Style: Chisel
Manufacturer: YESWELDER
Part Number: LBT150-ML
Item Weight: 10.12 pounds
Material: Copper
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
Date First Available: November 12, 2021
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Saturday, Sep 13
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
![Plasma Cutter, [Blow Back Pilot Arc][Large LED][Air Sensor] 50A Non-HF CNC bestarc Plasma Cutter Machine 110V/220V Dual Voltage, 5/8" Clean Cut 1" Max Cut, Post Flow, 2T/4T for Beginners DIY](https://m.media-amazon.com/images/I/715+gXn01pL._AC_US500_.jpg)
Top Amazon Reviews
Works great out of the box. Well worth the money.
Reviewed in the United States on July 23, 2024 by Jeff Lemasters
Needed a spool gun for my for my Miller 211 to do a quick aluminum repair. I had borrowed a friend's Miller 150 spool in the past but I needed one quicker than I could get it from him. I took the chance getting this rather than paying the outrageous price for the Miller. I am so happy I did!! I actually like it better than the Miller. Hooking it up to my 211 was so simple and loading wire in it was way easier than other spool guns I have tried. Worked like a charm and the repairs I needed to make were done in time. Over all, I highly recommend this and couldn't be happier!
...
show more
Reviewed in the United States on August 31, 2023 by BlacksmthSam
I needed a spool gun for my Millermatic 211 Autoset welder. I couldn't bring myself to pay over $700 for a Miller gun that is going to get occasional use so I bought the Yeswelder LBT 150-ML. Reviews seemed to say it was better than all the cheap guns online and possibly as good as the name brand ones. I'll review after using but here's my initial thoughts and a bunch of information that I struggled to find out. Even the Yeswelder website is very vague. It arrived with some extra parts besides what was on the gun. 2 extra tips, a wrench and a v grove roller for steel wire. The unit has the u groove roller installed for aluminum. The rollers accommodate .030" and .035" wire. Whatever size wire you are using you want those numbers facing up so you can read them when you install the roller. The spool gun uses the same size tips, diffuser, insulator and nozzle as the Lincoln Magnum 200/250 and the Tweco #2 mig guns. The nozzle is stamped 22-50 and is 1/2"ID 3-1/16"Long the back half is about .7"ID The nozzle slides back and forth for adjustments. From about 1/8" contact tip stick out to about 1/4" recess. You can pull the nozzle out even further but parts will be exposed to splatter, not something you want to do. And now the difficult part: The tips that came with the gun are Tweco 14 Series style. 1.5"Long .25"OD 1/4-28thread. There was one stamped AL0.9-0.035 and two stamped AL0.8-0.030 . Aluminum, millimeters-inches. I measured the tips and this is what I came up with: AL0.8-0.030 tip is 1.5"long .25"OD about .045"ID AL0.9-0.035 tip is 1.5"long .25"OD about .051"ID Yeswelder does not have a consumables kit listed for this spool gun, not even any tips listed on their website which seems ridiculous. I was able to figure out the consumables kit they have for the Lincoln Magnum 200/250 Tweco #2 has most of the parts needed but it comes with standard contact tips for steel. I couldn't find aluminum contact tips for this gun online. I ended up just ordering some standard sizes for steel that are one size bigger than the aluminum wire, apparently that's common practice when you don't have tips for aluminum. I just ordered the Yeswelder Lincoln Magnum 200 kit with the Tweco style 14-35 tips to use with the .030" aluminum wire. I think the the Yeswelder Lincoln Magnum 200 kit with Tweco style 14-45 tips would work for the .035" aluminum wire but not certain, the inner diameter might be a bit big from what I've read. I ended up buying some standard Tweco style 14-40 for the .035" aluminum wire online. Hopefully that works out otherwise I'll have to get some standard 14-45 tips which is close to what this gun came with. Very frustrated figuring out consumables and haven't even gotten to using the spool gun. Zero stars on information and parts availability. I'll let you know how it goes. So I probably did 100 repair welds on my dirty old aluminum trailer outside in cold weather last fall. I haven't had an opportunity to use it since. The thicker frame was easier to weld than the thin bed and cross members. I found there was a huge learning curve to welding aluminum compared to steel. I struggled a lot, ruined a bunch of tips, but eventually was able to do repairs that I would call not nice but adequate. I wish I could give you some insights on how this spool gun worked and compared to others but my lack of experience welding aluminum plus tough welding conditions would make for poor information.
...
show more
Reviewed in the United States on September 29, 2023 by RK RK
Working good with miller machine
Reviewed in the United States on July 20, 2024 by Amazon Customer
Gould be a great product. But it’s not plug and play. I need to make an adapter for the multipin connector
Reviewed in the United States on April 12, 2024 by Blake C.
The spool welder had some issues right out of the box. It hooked up perfectly to my millermatic 211 without having to switch polarity on anything inside the gun or in my machine. I went from welding standard steel to swapping out the gas cylinder and the steel spool was disconnected so I could use this gun with aluminum. There is a v-groove wire drive and a u-groove wire drive that comes with this about the diameter of a quarter. Make sure you have the U drive selected if you decide to use it with aluminum where it will not grip properly and will cause intermittent feeding which will blow out your tips. The gun came with three tips total. Two of them are 0.30 and the other one is 0.35. It is recommended to use 0.35 on the 0.30 wire if that is what you are using because the aluminum will heat up at the tip and expand and possibly get clogged up causing a burn back and blown out tip if you do longer runs with the 0.30 tip on 0.30 aluminum wire. Inside the window on the spool gun there is a gate that gets closed up and then you turn the tension knob to get a good feed tension. After I closed my gate It was pretty obvious that the gate itself was getting pushed outward by the tensioning post. There was no way that I could get tension on my wire because it was being forced too far away by the tension control arm itself. Since the tension control arm is made of plastic components it wasn't too hard to figure out that I had to trim some of the plastic off of the arm itself in order to allow the gate to close a little bit more which would then allow tension to be applied to the wire and the roller. Because of all of this I blew out two of my tips that came with the kit, called tech support and was leaving a message when I was cut off before I left my contact information. Believe it or not customer support actually called me back using caller ID, was very concerned about the problem and took down all the information and then just simply ask me if I would mind returning the unit and just order a second one at no extra shipping cost to me of course. To me that is excellent customer service where they will actually go out of their way to look at caller ID and call you back to help you out. No one ever does that. These guys have my future business now.
...
show more
Reviewed in the United States on January 30, 2024 by REW
Early days, and I've never used a spoolgun before, but connecting this was dead simple and in "auto" mode the Miller recognized it as a Spoolmate 150 and adjusted accordingly. I did not have any issue with the feed running backward. Just messing around, thinking I knew better, I fiddled with the voltage and speed settings, then found that the 220's automatic settings for my material were just about right to begin with at 35 CFH 100% argon. In that phase I managed to burn the wire back to the tip and solidly block it (never used a spoolgun...). Well... ground off the Al slag, chucked the tip in the lathe, and drilled out the passage; worked fine afterward. I do wish Yeswelder had included more than one .35 tip, but my hubris isn't their fault!
...
show more
Reviewed in the United States on October 19, 2023 by -not disclosed-
Funciona a la perfección
Reviewed in the United States on July 10, 2024 by Muy buena calidad de partes