Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
12 left in stock
Arrives
Saturday, May 23
Recently Viewed
Size: 50FT X 5FT (full car kit)
Features
- This premium automotive vinyl by VViViD Vinyls is specially engineered for DIY'ers. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.
- At 3.9mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum.
- This product has built in VViViD Air Release, VViViD Resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. See the product description below for the details about these technologies.
- Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.
- This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a 1 inch discrepancy may occur.
Material: Vinyl
Brand: VViViD
Size: 50FT X 5FT (full car kit)
Color: black
Exterior Finish: Matte
Brand Name: VViViD
Automotive Fit Type: Universal Fit
Manufacturer: VViViD Vinyls
Manufacturer Part Number: VV8-MB-50
Unit Count: 50 Count
Size: 50FT X 5FT (full car kit)
Item Thickness: 3.9 Mils
Color: black
Exterior Finish: Matte
Material Type: Vinyl
Compatible with Vehicle Type: Airplane, Boat, Car, Motorcycle
EU Spare Part Availability Duration: 5 Years
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Saturday, May 23
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 3ft x 5ft
Fantastic product. Pillar on Jeep peeled off. Replaced with this vinyl and looks brand new. First time doing. Ended up doing all 6 locations in about 2 hours. Heat gun is the key. No rips or tears. Just take your time to clean before. When trimming to car, cut slow.
Reviewed in the United States on April 10, 2026 by Lundy
Size: 2FT X 5FT
I used this stuff to wrap the front of a portable AC unit. All of the furniture in my basement is black or with a wood grain pattern so the white AC was really out of place, it was practically glowing. I should preface this review by mentioning that I have never wrapped anything before. A while back I considered wrapping my laptop but with the way I'm so particular about very small details I always felt like the wrapping process would drive me crazy and I would never be happy with the end result. This AC project didn't require nearly as much precision as wrapping a laptop so I was willing to give it a try. The end result was pretty good. I ended up with a few creases toward the bottom around the left hand edge but it's virtually impossible to see that. I was mainly concerned with getting the front of the unit a smooth matte black. Mission accomplished. This wrap was fairly easy to work with. I was able to pull it off and re-apply it over and over as I worked my way down from top to bottom. I didn't have a squeegee or whatever other tools you're supposed to use, instead applying it by hand all the way down. I didn't use any heat at all either. On the bottom I had about a half inch of fold under so I used some electrical tape to secure the bottom edge. I'm not sure how well it will hold up but since it will be inside I think it ought to be fine. If it starts peeling off I'll have plenty more to try it all again. Final notes: - Dimensions: I dunno what dimension is supposed to be 2 feet, but this roll was absolutely not 2 feet in either dimension. I haven't completely unfurled it but I'm assuming that's the 5 foot dimension. The roll I received is 3 feet tall. So I'm pretty sure I received a 3'x5' product. This worked out ok but I was counting on the 2' roll as I would have only had to cut out my piece in one direction rather than trim it in two directions. - Packing: the outer packaging was a sturdy cardboard box with some paper which offered ample protection during shipping. However, there were two very annoying pieces of tape used to keep it from unfurling in its packaging. This tape left a slight oily sheen on the matte surface which I didn't realize until after I had cut the piece to size and applied it. I was able to "buff out" the oily sheen with a dry rag.
...
show more
Reviewed in the United States on June 13, 2021 by R
Size: 10ft x 5ft
Very easy to install on a flat surface in a cool room. But! You might need to install this outside (we don't have a garage) or under warmer conditions (hey, you only get the time you get) or on a highly curved surface (like... parts of many car panels). And it's hard. The videos make it look easier than it is. I'm handy, and it's still tough. A couple hours to do the hood, and there are imperfections that annoy me. When it gets warm, it gets too sticky, and then it's hard to adjust and get air bubbles out. If you need to wrap onto contours, it will want to wrinkle. It's very challenging to get it to lay flat. Sometimes, for large enough contours, it just cannot stretch enough to lay on the surface. Getting the edges right is tough. The material will contract slightly when heated, or recoil slightly from the stretching you needed to do to get it into place, revealing the material underneath. It's tough to cut it evenly, and *not* to scratch the surfaces underneath. It's tough to heat up the material enough to get the stretch you need without overheating it. In the videos people use blow torches, but this is very tricky. The best tool for us, in the end, was just a hair dryer. The end result in our case was that most sections of the material look awesome, maybe 99.9%. But that last 0.1% is noticeable if you're looking for it: little wrinkles in a couple contoured spots, little exposed edges near difficult-to-cut spots, and some places where the matte has relaxed into more of a shiny finish in overheated spots. If you realllly want to change the color of a panel of your car, and you don't want to pay a professional or make it permanent, then this is probably the best option. Just get ready for several hours of frustrating work and an imperfect finish.
...
show more
Reviewed in the United States on September 29, 2023 by S. Collins
Size: 6" x 60"
I'm amazed at the durability of this stuff on the outside of a car. 1 year and still looks great and was easy to cut and apply.
Reviewed in the United States on April 2, 2026 by JT
Size: 1FT X 5FT
Excellent quality vinyl!!!
Reviewed in the United States on May 3, 2026 by Travis Frith
Size: 25ft x 5ft
Delivered with several tears on the ends almost like the employee through it in the box and maybe even hit a few balls with it. You would think as much as it cost they would have better pride in their product. It also kinks very easily thus leaving marks on wrap even when you release it and reheat.
Reviewed in the United States on May 14, 2026 by Travis Waite
Size: 1ft x 2ft
The wrap is super easy to install because it doesn’t set until you apply heat. I bought a cheap heat gun and easily set it in place. Because it doesn’t set until you apply heat. It was easy to reposition so that it fit perfectly. It was much easier to use than other wraps. It made installing the wrap stress-free.
...
show more
Reviewed in the United States on February 25, 2026 by MAJ Shakespeare