Vortex Strike Eagle Second Focal Plane Riflescopes

Speed and versatility—that’s what 1x variable optics offer shooters who need to engage targets from point-blank out to 600 yards, and that’s exactly what you get with the redesigned Strike Eagle. With the BDC3 reticle and a thread-in throw lever, you’ll be on target even faster. Thread in the included throw lever as shown until the throw lever is secured. Do not over torque the throw lever. The magnification adjustment is used to change the riflescope’s magnification level, or "power,” adjusting from low to high magnification depending on the shooter’s preference. To activate/adjust the illumination, rotate the adjustment dial in either direction. The illumination dial allows for 11 levels of illumination intensity. Your riflescope uses a fast focus eyepiece designed to quickly and easily adjust the focus on the riflescope’s reticle. 1. Look through the riflescope at a blank white wall or at the sky. 2. Turn focus knob fully outward (counterclockwise). 3. Slowly turn the eyepiece focus knob inward until the reticle image is as crisp as possible. Your riflescope features adjustable elevation and windage turret dials with audible and tactile clicks. Each click moves the point of impact 1/2 MOA. 1. Remove the turret caps. 2. Following the directional arrows, turn the dials in the direction you wish the bullet’s point of impact to go. 3. When finished adjusting, replace the turret caps. Strike Eagles feature Elevation and Windage Turrets that allow you to re-index the zero indicator after sight-in without disturbing your zero setting. 1. After completing the final sight-in, remove the turret cap(s). 2. Without rotating the turret, twist the turret dial to reposition it with the “0” mark aligned with “Up” on the scope housing. 3. Replace the turret cap(s).