The Zero Gen 2 Reloading Press

Features

• A FIRMER LINKAGE: The Gen 1 was built around the idea of seating your shellholder to the bottom of your die. While we still consider that the best way to size brass, customers asked for a firmer bottom of the stroke so they could cam-over and float the shellholder below a die. Done.
• A SMOOTHER STROKE: The ZERO, since day 1, has been the smoothest press on the market. After thousands of presses, however, we have found ways to make each stroke even smoother on every press, starting with the first strokes. This improvement is subtle, but very real, and one that both new owners and longtime ZERO owners will appreciate.
• CREATURE COMFORTS: By doing small things, like adding a detent to the primer tray, and a torque tool storage slot to the side of the press, we continue to move forward with our commitment to ergonomics at the bench.
• FULL GEN 1 ACCESSORY COMPATIBILITY: Making this update was important to us, but we didnt want to make it and leave existing customers in the cold. You will be able to use your same press stands, storage trays, shellholders, turrets (you may need to check your die adjustment, due to the linkage change), and other ZERO Accessories with no issues
• The ZERO remains the pinnacle of precision reloading presses, manufactured in Ohio, from American raw materials, by American workers.
• The zero-slop turret head allows you to change between dies, eliminating the variability induced when removing and resetting diesThe turret head allows the press to work with multiple die-attachments (7/8 thread currently, 1-1/4 thread, and future unreleased stuff) without goofy thread-stacking adapters
• The available ram-stroke here is 4.4, allowing you to use it on significantly large cases
• Total opening of 4.75, with no unnecessary shellholder protrusion at the bottom of the stroke
• The extended ram position will be more repeatable than any ram-style press on the market
• Adjustable/interchangeable handle setup for maximizing leverage/feel based on operation

Description

The opening in the press will allow for sizing and seating of cases up to 338LM, and will accept standard 7/8″ dies and standard shellholders (we prefer the Redding). The press CAN be used for Cheytac-class reloading, but may (depending on your die setup and bullet length) require you to “scoop” the bullet into the seating die and down into the case before seating.

Item Package Dimensions L x W x H: ‎22 x 15 x 10 inches

Package Weight: ‎35 pounds

Brand Name: ‎AREA 419

Warranty Description: ‎They have both a warranty and a guarantee. We warranty our work to be free from defect and warranty them against any failures due to manufacture. This does not cover, however, normal wear and tear. We also guarantee your satisfaction. If you use our product and are not satisfied with its performance/function/fit/finish, we will refund or replace, no questions asked.

Model Name: ‎The Zero Gen 2 Reloading Press

Color: ‎Gray and Black

Material: ‎Aluminum

Suggested Users: ‎gunsmithing

Manufacturer: ‎Area 419

Style: ‎7/8" Standard

Included Components: ‎The press comes with a 7/8 turret head

Date First Available: April 30, 2025