Tablet Oscilloscope,with 2 Channel 100MHz Bandwidth 1GSa/s Sampling Rate Oscilloscope,Multifunction Oscilloscope,Ultra Thin Portable USB Oscilloscope
Condition: New
Buy Now, Pay Later
As low as
$26.33
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
Returnable until Jan 31, 2025
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 5 left in stock, order soon!
Arrives
Friday, Sep 19
Recently Viewed
Style: ADS1013D Ⅱ
Features
- 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry.
- Intelligent anti-burn, 1 times withstand voltage up to 400V. Built-in 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.(Note:Before use, please read the manual attached to the product. If you have any questions, you can contact us. )
- Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
- Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.
- High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V,100X can measure 0 ~ 4000V.Up to 12 parameters measurement:VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty ,Duty-,Time ,Time-,Period.This USB oscilloscope is equipped with a USB interface and can be connected to a computer to share its screenshots with the computer, which facilitates secondary analysis.
Product Dimensions : 4.88 x 0.2 x 7.24 inches; 2.18 Pounds
Item model number : Ca-WM-03
Batteries : 2 Lithium Ion batteries required. (included)
Date First Available : April 29, 2020
Manufacturer : Aiteme
Best Sellers Rank: #212,490 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #136 in Lab Oscilloscopes
#136 in Lab Oscilloscopes:
Customer Reviews: 4.2 4.2 out of 5 stars 333 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, Sep 19
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: ADS1013D Ⅱ
I wanted a small, portable, battery-operated oscilloscope having reasonable performance at a reasonable price. This oscilloscope is much more than merely satisfactory! I could have bought more performance for less money with one of the units that uses a laptop PC as its host, display and power source, but I find that a very cumbersome arrangement for portable use. And most of the outboard units that use a PC do not protect the PC from over-voltage spikes and ground faults, from my viewpoint a crippling (and potentially expensive) deficiency. I read comments that indicated that packaging had been a problem for some buyers, so I made a point of buying my scope from Anmascop-US, a storefront in the US for the Chinese manufacturer that stocks items in the US. My unit arrived within a week, well packed and in perfect condition. This unit is sold under several different brand names, but the model number appears to always be ADS1013D-II. There are two versions available: the older ADS1013D has the probe connections projecting from the top edge of the case, while the ADS1013D-II has the probe connections inset into a well in the top edge of the case. The ADS1013D-II also has a shiny "picture frame" around the display screen. Price is about the same for the two versions, but it appears that the -II version that I bought has some updates. Like many offshore designs, the user manual requires some interpretation because the writer was clearly not a native speaker of English. However if you know how a conventional oscilloscope works, you can make sense of it after several readings and some experimentation. Also, you have to remember that a small device like this one has no space for knobs; all settings are made via the touch screen (which has VERY fast response) and thus you have to get used to operating it via that interface. A few settings are "hidden", in that there was no obvious way for the manufacturer to incorporate them. For example it took me awhile to understand that the time-base setting is adjusted up and down by tapping on the right and left sides of the screen. I was astonished to find that the two input channels use 12-bit converters; I had expected to find 8-bit resolution which would have been good enough for my needs. However testing against an adjustable DC supply, monitored by a 3 1/2 digit DVM, made it clear that the display is indeed 4000 counts from bottom to top and the trace on the screen does not reveal the 100 steps per division that careful testing indicates. The specifications are unclear about this, but the unit automatically handles + and - inputs with a seamless crossover as you would expect. The on-screen digital voltage readings indicated very good linearity and accuracy. And the display is very sharp and clear. Are there weak spots or missing features? Of course, what would you expect for $150? But for me they are not a problem. The biggest weakness is in triggering, and use of a common timebase. There is no external triggering input, and the two channels are driven from the same trigger; you select which channel, voltage level and direction. And for long timebase settings, the triggering is one-shot, not recurring. Since the two channels use the same timebase you can't trigger from one channel and then display the result on the other channel using a faster timebase setting. The approach for saving the waveform works OK but it wasn't clear from the instructions that tapping the saved image would add the annotation overlay that isn't shown on the thumbnails. The file saved to the PC is in a format that I haven't been able to open, but as long as a high-resolution screenshot "photo" is OK for your needs, no problem. The battery takes a long time to charge, and I suspect a higher-current adapter would be OK; 4 hours use time is great but 6 hours to charge isn't. The inset BNC connectors for the probes provide a sleek appearance but getting the probe connector for Channel 1 attached requires small fingers. And I would be astonished if the scope has anywhere near the 1GS/sec sampling performance listed in the specs. Each input appears to have a dual A/D converter and perhaps the timebases are "verniered" so that on a sampling basis you have 1GS/sec sampling. I'm not likely to ever need even as much as a 20MHz real-time capture, so don't anticipate a problem. And like any semiconductor A/D converter, be careful about input voltage. You're not applying the input to the grid of a tube that can handle over-voltage, as in my younger days with Tektronix scopes. I am glad I bought this scope! Martt
...
show more
Reviewed in the United States on December 31, 2020 by Martt Harding
Style: ADS1013D Ⅱ
Hard to beat this oscilloscope for the price/features. Easy to use, very good "first" scope. Was able to learn a lot about using a scope from this one. Have since gotten a Hantek but still keep this around/charged, for some uses it is a lot easier to pick up this one than the Hantek and as a portable scope it is VERY hard to beat. Still glad I have it, it holds a charge VERY well, and is perfect for simpler tasks. Clear/sharp/bright screen w/fast refresh rate.
...
show more
Reviewed in the United States on October 21, 2024 by Todd B.
Style: ADS1013D Ⅱ
This product supplies everything one would expect in a ‘scope. It is easy to learn where all the controls are and adds some, too. The battery lasts at least 3 hours, maybe more, and can be used while charging with the included charger. The first unit I bought ‘broke’ while using, so I had thought it did so from something I did, although I never determined that. The replacement unit came rather quickly and has worked like a champ ever since. This ‘scope has a ‘single signal’ function, where the signal voltages are pictured in one set of cycles for you to peruse. I am happy with the purchase and would recommend it for the tech in your family.
...
show more
Reviewed in the United States on December 25, 2021 by David Schaedler
I would say a very good basic 2-channel oscilloscope made by Fei Ni Rui Si Technology, in PRC - China. Simple and intuitive touchscreen layout that responds and works well. Several YouTube videos confirm the Bandwidth is around 27-30 MHz as opposed to the claimed 100 MHz and the sampling rate around 200 Ms/s as opposed to the claimed 1 Gs/s, but I knew this going in and for the price you simply cannot ask for more. I intend to use mostly for automotive where unnecessarily high bandwidth is undesirable anyway because it introduces more noise. I understand the bandwidth requirement for automotive is at least 5 MHz to 20 MHz and Sampling Rate cannot be lower than 10 MS/s or it won't be fast enough for certain scenarios such as CAN (more is better), so this product seems to fit the bill. In terms of portability and integration to me this layout beats the virtual scopes that require you to drag a laptop (added risk). It seems to me the best and most practical scope solutions for automotive are exactly tablet touchscreen standalone solutions, where if Android-based is better and if designed for automotive even better. This scope comes with basic probes not suitable for automotive. I will end up spending three times as much on leads, adapters and accessories since a good current clamp meter is a must. The AESWave U-scope was also on my list but it is just 1-channel and you need at least two channels (CAN Bus testing). On my list are also the Micsig STO1104E (Android-based), Micsig ATO1104 Automotive Tablet (impressive) and of course the Virtual Scope Pico 4425A and the 2405A. Micsig is also PRC-Chinese and Pico Technologies is out of UK. Of all, Pico offers the most impressive array of support, plus their software is also quite good. I wish Pico would come out with Android-based solutions and touchscreen tablets. I am a DIYer and not a professional mechanic so my situation and needs are different.
...
show more
Reviewed in the United States on December 5, 2021 by A. De Mello
Style: ADS1013D Ⅱ
I sent this email and got no reply. Customer Service of Anmascop: I was excited to receive your product the other day from Amazon. Was extremely disappointed that the product is defective. I thought I'd see if you would stand by your product and respond to my Email. Will wait awhile for your response before I return scope for some other. If it works as advertised, It should be a handy piece of equipment to own. The problems are as follows: * Unit does not power up, even with the charger connected. * Scope will not hold a charge, red & green LEDs light-up when the charger is connected. But when the charger is removed, both LEDs go dark. * Ground spring is missing. * Thought it was advertised as a 200MHZ unit. Thank you for taking the time to reply
...
show more
Reviewed in the United States on April 7, 2023 by Johnmtbr